Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5571): Process ended prematurely: osmo-stp_10.42.42.5(pid=5571) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5571)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:12:50.115082 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.126422 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:12:50.274414 tst cs_paging_gprs_active.py: using LAC 18036 01:12:50.404876 tst cs_paging_gprs_active.py: using RAC 186 01:12:50.533091 tst cs_paging_gprs_active.py: using CellId 18036 01:12:50.662696 tst cs_paging_gprs_active.py: using BVCI 18037 01:12:50.687982 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.699419 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.710643 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.722002 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.733209 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.744395 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.755747 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.766906 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:50.778317 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:12:50.894237 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:12:51.179199 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:12:51.307462 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:12:51.627238 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5561): Launched 01:12:51.893105 run iperf3-srv_10.42.42.10(pid=5562): Launched 01:12:52.080306 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:12:52.207911 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:12:52.526892 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5563): Launched 01:12:52.794019 run iperf3-srv_10.42.42.10(pid=5564): Launched 01:12:52.981475 tst cs_paging_gprs_active.py:38: start network... 01:12:53.109255 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:12:53.593780 run create_hlr_db(pid=5565): Launched 01:12:53.771223 bus /gobi_6: Setting Powered False 01:12:54.792084 run create_hlr_db(pid=5565): Terminated: ok {rc=0} 01:12:55.230275 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5567): Launched 01:12:55.561842 run osmo-hlr_10.42.42.2(pid=5568): Launched 01:12:55.681432 run osmo-stp_10.42.42.5: Starting osmo-stp 01:12:56.256520 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5570): Launched 01:12:56.587244 run osmo-stp_10.42.42.5(pid=5571): Launched 01:12:56.706642 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:12:57.282511 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5573): Launched 01:12:57.400078 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:12:57.687177 run patchelf(pid=5574): Launched 01:12:57.879789 run osmo-stp_10.42.42.5(pid=5571): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5571)] 01:12:58.020306 run osmo-stp_10.42.42.5(pid=5571): stdout: | (launched: 2022-12-09_01:12:56.424182) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:12:58.162580 run osmo-stp_10.42.42.5(pid=5571): stderr: | �[0;m�[38;5;43m20221209011256621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209011256621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209011256621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209011256622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209011256622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209011256622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209011256622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:12:58.298511 run osmo-stp_10.42.42.5(pid=5571): stdout: | (launched: 2022-12-09_01:12:56.424182) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:12:58.432905 run osmo-stp_10.42.42.5(pid=5571): stderr: | �[0;m�[38;5;43m20221209011256621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209011256621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209011256621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209011256622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209011256622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209011256622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209011256622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:12:58.589851 run patchelf(pid=5574): Terminating (SIGINT) 01:12:58.773699 run patchelf(pid=5574): Terminated: ok {rc=0} 01:12:58.807456 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5571): Process ended prematurely: osmo-stp_10.42.42.5(pid=5571) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5571)] [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:12:58.817489 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:12:58.880935 run osmo-hlr_10.42.42.2(pid=5568): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5568)] 01:12:58.932628 run osmo-hlr_10.42.42.2(pid=5568): stdout: | (launched: 2022-12-09_01:12:55.398425) 01:12:58.985164 run osmo-hlr_10.42.42.2(pid=5568): stderr: | �[0;m�[1;31m20221209011255596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209011255596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209011255597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209011255597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209011255597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209011255597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209011255610 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209011255619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209011255619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209011255619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:12:59.029835 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5561): Terminating (SIGTERM) 01:12:59.071875 run iperf3-srv_10.42.42.10(pid=5562): Terminating (SIGTERM) 01:12:59.114483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5563): Terminating (SIGTERM) 01:12:59.156532 run iperf3-srv_10.42.42.10(pid=5564): Terminating (SIGTERM) 01:12:59.200307 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5567): Terminating (SIGTERM) 01:12:59.242467 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5570): Terminating (SIGTERM) 01:12:59.284496 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5573): Terminating (SIGTERM) 01:12:59.294203 --- ParallelTerminationStrategy: PID 5561 died... 01:12:59.350255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5561): Terminated: ok {rc=0} 01:12:59.360269 --- ParallelTerminationStrategy: PID 5562 died... 01:12:59.416010 run iperf3-srv_10.42.42.10(pid=5562): Terminated {rc=256} 01:12:59.426105 --- ParallelTerminationStrategy: PID 5563 died... 01:12:59.482394 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5563): Terminated: ok {rc=0} 01:12:59.492419 --- ParallelTerminationStrategy: PID 5564 died... 01:12:59.548156 run iperf3-srv_10.42.42.10(pid=5564): Terminated {rc=256} 01:12:59.558182 --- ParallelTerminationStrategy: PID 5567 died... 01:12:59.613902 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5567): Terminated: ok {rc=0} 01:12:59.623913 --- ParallelTerminationStrategy: PID 5570 died... 01:12:59.679708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5570): Terminated: ok {rc=0} 01:12:59.689780 --- ParallelTerminationStrategy: PID 5573 died... 01:12:59.745526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5573): Terminated: ok {rc=0} 01:12:59.834260 bus /gobi_0: Setting Powered False 01:13:00.949126 bus /gobi_0: Setting Powered False 01:13:02.086276 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5571): Process ended prematurely: osmo-stp_10.42.42.5(pid=5571) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5571)]