Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6630): Process ended prematurely: osmo-stp_10.42.42.5(pid=6630) [trial-2352↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6630)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 01:24:10.987137 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:10.999443 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:24:11.147226 tst cs_paging_gprs_active.py: using LAC 18095 01:24:11.271043 tst cs_paging_gprs_active.py: using RAC 245 01:24:11.393071 tst cs_paging_gprs_active.py: using CellId 18095 01:24:11.513925 tst cs_paging_gprs_active.py: using BVCI 18096 01:24:11.537182 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.548658 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.559893 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.571638 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.583468 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.595962 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.607243 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.619102 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:24:11.631055 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:24:11.753866 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:24:12.051669 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:24:12.186743 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:24:12.522336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6620): Launched 01:24:12.802825 run iperf3-srv_10.42.42.10(pid=6621): Launched 01:24:13.001996 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:24:13.137385 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:24:13.474529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6622): Launched 01:24:13.754599 run iperf3-srv_10.42.42.10(pid=6623): Launched 01:24:13.953737 tst cs_paging_gprs_active.py:38: start network... 01:24:14.089318 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:24:14.611659 run create_hlr_db(pid=6624): Launched 01:24:14.799459 bus /gobi_6: Setting Powered False 01:24:15.820604 run create_hlr_db(pid=6624): Terminated: ok {rc=0} 01:24:16.290260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6626): Launched 01:24:16.782277 run osmo-hlr_10.42.42.2(pid=6627): Launched 01:24:16.973490 run osmo-stp_10.42.42.5: Starting osmo-stp 01:24:17.572072 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6629): Launched 01:24:17.875781 run osmo-stp_10.42.42.5(pid=6630): Launched 01:24:17.985943 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:24:18.514506 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6632): Launched 01:24:18.622458 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:24:18.887963 run patchelf(pid=6633): Launched 01:24:19.065845 run osmo-stp_10.42.42.5(pid=6630): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6630)] 01:24:19.196515 run osmo-stp_10.42.42.5(pid=6630): stdout: | (launched: 2022-12-09_01:24:17.726009) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:24:19.328706 run osmo-stp_10.42.42.5(pid=6630): stderr: | �[0;m�[38;5;43m20221209012417898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012417898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012417898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012417898 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012417899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012417899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012417899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:24:19.454757 run osmo-stp_10.42.42.5(pid=6630): stdout: | (launched: 2022-12-09_01:24:17.726009) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:24:19.579415 run osmo-stp_10.42.42.5(pid=6630): stderr: | �[0;m�[38;5;43m20221209012417898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012417898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012417898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012417898 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012417899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012417899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012417899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:24:19.724701 run patchelf(pid=6633): Terminating (SIGINT) 01:24:19.895671 run patchelf(pid=6633): Terminated: ok {rc=0} 01:24:19.927121 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6630): Process ended prematurely: osmo-stp_10.42.42.5(pid=6630) [trial-2352↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6630)] [trial-2352↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 01:24:19.936386 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 01:24:19.997398 run osmo-hlr_10.42.42.2(pid=6627): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6627)] 01:24:20.047268 run osmo-hlr_10.42.42.2(pid=6627): stdout: | (launched: 2022-12-09_01:24:16.460229) 01:24:20.097830 run osmo-hlr_10.42.42.2(pid=6627): stderr: | �[0;m�[1;31m20221209012416762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209012416762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209012416762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209012416762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209012416762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209012416762 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209012416785 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209012416814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209012416814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209012416814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:24:20.140045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6620): Terminating (SIGTERM) 01:24:20.180429 run iperf3-srv_10.42.42.10(pid=6621): Terminating (SIGTERM) 01:24:20.220678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6622): Terminating (SIGTERM) 01:24:20.260527 run iperf3-srv_10.42.42.10(pid=6623): Terminating (SIGTERM) 01:24:20.300827 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6626): Terminating (SIGTERM) 01:24:20.341221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6629): Terminating (SIGTERM) 01:24:20.381419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6632): Terminating (SIGTERM) 01:24:20.390810 --- ParallelTerminationStrategy: PID 6620 died... 01:24:20.444554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6620): Terminated: ok {rc=0} 01:24:20.454325 --- ParallelTerminationStrategy: PID 6621 died... 01:24:20.507740 run iperf3-srv_10.42.42.10(pid=6621): Terminated {rc=256} 01:24:20.517377 --- ParallelTerminationStrategy: PID 6622 died... 01:24:20.570663 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6622): Terminated: ok {rc=0} 01:24:20.580212 --- ParallelTerminationStrategy: PID 6623 died... 01:24:20.633526 run iperf3-srv_10.42.42.10(pid=6623): Terminated {rc=256} 01:24:20.643245 --- ParallelTerminationStrategy: PID 6626 died... 01:24:20.696789 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6626): Terminated: ok {rc=0} 01:24:20.706333 --- ParallelTerminationStrategy: PID 6629 died... 01:24:20.759525 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6629): Terminated: ok {rc=0} 01:24:20.769752 --- ParallelTerminationStrategy: PID 6632 died... 01:24:20.823192 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6632): Terminated: ok {rc=0} 01:24:20.906753 bus /gobi_0: Setting Powered False 01:24:22.015433 bus /gobi_0: Setting Powered False 01:24:23.128231 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6630): Process ended prematurely: osmo-stp_10.42.42.5(pid=6630) [trial-2352↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6630)]