Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=8734): Process ended prematurely: osmo-stp_10.42.42.5(pid=8734) [trial-2352↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8734)]
Standard Output
---------------------------------------------- trial-2352 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 01:50:17.015181 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.028131 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 01:50:17.201445 tst cs_paging_gprs_active.py: using LAC 18235 01:50:17.328137 tst cs_paging_gprs_active.py: using RAC 130 01:50:17.449269 tst cs_paging_gprs_active.py: using CellId 18235 01:50:17.575965 tst cs_paging_gprs_active.py: using BVCI 18236 01:50:17.599829 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.610811 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.621502 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.632850 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.644136 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.655117 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.666524 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.677617 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:17.688900 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:50:17.808596 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:50:18.093435 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:50:18.221194 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:50:18.538623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8724): Launched 01:50:18.803642 run iperf3-srv_10.42.42.10(pid=8725): Launched 01:50:18.990127 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:50:19.117755 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:50:19.435249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8726): Launched 01:50:19.698999 run iperf3-srv_10.42.42.10(pid=8727): Launched 01:50:19.885881 tst cs_paging_gprs_active.py:38: start network... 01:50:20.013499 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:50:20.493736 run create_hlr_db(pid=8728): Launched 01:50:20.669394 bus /sierra_2: Setting Powered False 01:50:21.690356 run create_hlr_db(pid=8728): Terminated: ok {rc=0} 01:50:22.125370 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8730): Launched 01:50:22.453780 run osmo-hlr_10.42.42.2(pid=8731): Launched 01:50:22.574260 run osmo-stp_10.42.42.5: Starting osmo-stp 01:50:23.142328 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8733): Launched 01:50:23.469546 run osmo-stp_10.42.42.5(pid=8734): Launched 01:50:23.589194 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:50:24.161349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8737): Launched 01:50:24.278859 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:50:24.565603 run patchelf(pid=8738): Launched 01:50:24.758334 run osmo-stp_10.42.42.5(pid=8734): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8734)] 01:50:24.899175 run osmo-stp_10.42.42.5(pid=8734): stdout: | (launched: 2022-12-09_01:50:23.309146) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:25.040350 run osmo-stp_10.42.42.5(pid=8734): stderr: | �[0;m�[38;5;43m20221209015023500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015023500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015023500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015023501 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015023501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015023501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015023501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:25.175981 run osmo-stp_10.42.42.5(pid=8734): stdout: | (launched: 2022-12-09_01:50:23.309146) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:25.311236 run osmo-stp_10.42.42.5(pid=8734): stderr: | �[0;m�[38;5;43m20221209015023500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209015023500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209015023500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209015023501 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209015023501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209015023501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209015023501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:25.468134 run patchelf(pid=8738): Terminating (SIGINT) 01:50:25.652805 run patchelf(pid=8738): Terminated: ok {rc=0} 01:50:25.686811 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8734): Process ended prematurely: osmo-stp_10.42.42.5(pid=8734) [trial-2352↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8734)] [trial-2352↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 01:50:25.696650 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:50:25.760132 run osmo-hlr_10.42.42.2(pid=8731): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8731)] 01:50:25.811905 run osmo-hlr_10.42.42.2(pid=8731): stdout: | (launched: 2022-12-09_01:50:22.292714) 01:50:25.864069 run osmo-hlr_10.42.42.2(pid=8731): stderr: | �[0;m�[1;31m20221209015022491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209015022491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209015022491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209015022491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209015022491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209015022491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209015022504 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209015022512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209015022512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209015022512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:50:25.909172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8724): Terminating (SIGTERM) 01:50:25.951320 run iperf3-srv_10.42.42.10(pid=8725): Terminating (SIGTERM) 01:50:25.993725 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8726): Terminating (SIGTERM) 01:50:26.036146 run iperf3-srv_10.42.42.10(pid=8727): Terminating (SIGTERM) 01:50:26.078500 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8730): Terminating (SIGTERM) 01:50:26.120847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8733): Terminating (SIGTERM) 01:50:26.163366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8737): Terminating (SIGTERM) 01:50:26.173298 --- ParallelTerminationStrategy: PID 8724 died... 01:50:26.229960 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8724): Terminated: ok {rc=0} 01:50:26.240146 --- ParallelTerminationStrategy: PID 8725 died... 01:50:26.295902 run iperf3-srv_10.42.42.10(pid=8725): Terminated {rc=256} 01:50:26.306096 --- ParallelTerminationStrategy: PID 8726 died... 01:50:26.361974 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8726): Terminated: ok {rc=0} 01:50:26.372121 --- ParallelTerminationStrategy: PID 8727 died... 01:50:26.427993 run iperf3-srv_10.42.42.10(pid=8727): Terminated {rc=256} 01:50:26.438177 --- ParallelTerminationStrategy: PID 8730 died... 01:50:26.494065 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8730): Terminated: ok {rc=0} 01:50:26.504257 --- ParallelTerminationStrategy: PID 8733 died... 01:50:26.560075 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8733): Terminated: ok {rc=0} 01:50:26.570349 --- ParallelTerminationStrategy: PID 8737 died... 01:50:26.626228 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8737): Terminated: ok {rc=0} 01:50:26.713287 bus /gobi_0: Setting Powered False 01:50:27.822345 bus /gobi_0: Setting Powered False 01:50:28.934399 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8734): Process ended prematurely: osmo-stp_10.42.42.5(pid=8734) [trial-2352↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8734)]