Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4144): Process ended prematurely: osmo-stp_10.42.42.5(pid=4144) [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4144)]
Standard Output
---------------------------------------------- trial-2352 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:56:16.855515 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:16.867347 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:56:17.058131 tst cs_paging_gprs_active.py: using LAC 17948 00:56:17.198266 tst cs_paging_gprs_active.py: using RAC 98 00:56:17.333616 tst cs_paging_gprs_active.py: using CellId 17948 00:56:17.465587 tst cs_paging_gprs_active.py: using BVCI 17949 00:56:17.490763 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.502090 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.513493 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.525048 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.536318 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.547801 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.559190 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.570374 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:17.581878 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:56:17.696841 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:56:17.991925 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:56:18.127440 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:56:18.463943 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4134): Launched 00:56:18.746694 run iperf3-srv_10.42.42.10(pid=4135): Launched 00:56:18.946395 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:56:19.082798 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:56:19.420408 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4136): Launched 00:56:19.702904 run iperf3-srv_10.42.42.10(pid=4137): Launched 00:56:19.902736 tst cs_paging_gprs_active.py:38: start network... 00:56:20.038639 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:56:20.559946 run create_hlr_db(pid=4138): Launched 00:56:20.748447 bus /gobi_6: Setting Powered False 00:56:21.769262 run create_hlr_db(pid=4138): Terminated: ok {rc=0} 00:56:22.179544 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4140): Launched 00:56:22.486576 run osmo-hlr_10.42.42.2(pid=4141): Launched 00:56:22.606587 run osmo-stp_10.42.42.5: Starting osmo-stp 00:56:23.149248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4143): Launched 00:56:23.475615 run osmo-stp_10.42.42.5(pid=4144): Launched 00:56:23.593449 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:56:24.162835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4146): Launched 00:56:24.279468 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:56:24.567185 run patchelf(pid=4147): Launched 00:56:24.758530 run osmo-stp_10.42.42.5(pid=4144): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4144)] 00:56:24.899119 run osmo-stp_10.42.42.5(pid=4144): stdout: | (launched: 2022-12-09_00:56:23.314795) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:25.039776 run osmo-stp_10.42.42.5(pid=4144): stderr: | �[0;m�[38;5;43m20221209005623510 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005623510 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005623510 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005623510 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005623511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005623511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005623511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:25.174932 run osmo-stp_10.42.42.5(pid=4144): stdout: | (launched: 2022-12-09_00:56:23.314795) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:25.308303 run osmo-stp_10.42.42.5(pid=4144): stderr: | �[0;m�[38;5;43m20221209005623510 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005623510 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005623510 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005623510 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005623511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005623511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005623511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:25.464052 run patchelf(pid=4147): Terminating (SIGINT) 00:56:25.647267 run patchelf(pid=4147): Terminated: ok {rc=0} 00:56:25.680750 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4144): Process ended prematurely: osmo-stp_10.42.42.5(pid=4144) [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4144)] [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:56:25.690684 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 00:56:25.754040 run osmo-hlr_10.42.42.2(pid=4141): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4141)] 00:56:25.805752 run osmo-hlr_10.42.42.2(pid=4141): stdout: | (launched: 2022-12-09_00:56:22.334459) 00:56:25.858364 run osmo-hlr_10.42.42.2(pid=4141): stderr: | �[0;m�[1;31m20221209005622510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209005622510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209005622510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209005622510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209005622511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209005622511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209005622523 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209005622531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209005622531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209005622531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:56:25.902805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4134): Terminating (SIGTERM) 00:56:25.945220 run iperf3-srv_10.42.42.10(pid=4135): Terminating (SIGTERM) 00:56:25.987788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4136): Terminating (SIGTERM) 00:56:26.029791 run iperf3-srv_10.42.42.10(pid=4137): Terminating (SIGTERM) 00:56:26.072069 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4140): Terminating (SIGTERM) 00:56:26.114842 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4143): Terminating (SIGTERM) 00:56:26.157041 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4146): Terminating (SIGTERM) 00:56:26.166820 --- ParallelTerminationStrategy: PID 4134 died... 00:56:26.223277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4134): Terminated: ok {rc=0} 00:56:26.233441 --- ParallelTerminationStrategy: PID 4135 died... 00:56:26.289175 run iperf3-srv_10.42.42.10(pid=4135): Terminated {rc=256} 00:56:26.299252 --- ParallelTerminationStrategy: PID 4136 died... 00:56:26.355209 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4136): Terminated: ok {rc=0} 00:56:26.365360 --- ParallelTerminationStrategy: PID 4137 died... 00:56:26.420899 run iperf3-srv_10.42.42.10(pid=4137): Terminated {rc=256} 00:56:26.431037 --- ParallelTerminationStrategy: PID 4140 died... 00:56:26.486831 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4140): Terminated: ok {rc=0} 00:56:26.497073 --- ParallelTerminationStrategy: PID 4143 died... 00:56:26.552780 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4143): Terminated: ok {rc=0} 00:56:26.562894 --- ParallelTerminationStrategy: PID 4146 died... 00:56:26.619094 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4146): Terminated: ok {rc=0} 00:56:26.706095 bus /gobi_0: Setting Powered False 00:56:27.814335 bus /gobi_0: Setting Powered False 00:56:28.921659 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4144): Process ended prematurely: osmo-stp_10.42.42.5(pid=4144) [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4144)]