Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4211): Process ended prematurely: osmo-stp_10.42.42.5(pid=4211) [trial-2352↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4211)]
Standard Output
---------------------------------------------- trial-2352 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:57:17.366700 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.377460 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:57:17.524335 tst cs_paging_gprs_active.py: using LAC 17953 00:57:17.644935 tst cs_paging_gprs_active.py: using RAC 103 00:57:17.766772 tst cs_paging_gprs_active.py: using CellId 17953 00:57:17.892835 tst cs_paging_gprs_active.py: using BVCI 17954 00:57:17.918094 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.929601 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.940882 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.952332 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.963726 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.975468 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.987108 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:17.998527 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:18.009934 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:57:18.127604 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:57:18.424303 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:57:18.560808 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:57:18.901809 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4201): Launched 00:57:19.182250 run iperf3-srv_10.42.42.10(pid=4202): Launched 00:57:19.381727 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:57:19.517664 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:57:19.856736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4203): Launched 00:57:20.138350 run iperf3-srv_10.42.42.10(pid=4204): Launched 00:57:20.338366 tst cs_paging_gprs_active.py:38: start network... 00:57:20.474872 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:57:20.996114 run create_hlr_db(pid=4205): Launched 00:57:21.184274 bus /gobi_6: Setting Powered False 00:57:22.205897 run create_hlr_db(pid=4205): Terminated: ok {rc=0} 00:57:22.616488 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4207): Launched 00:57:22.922437 run osmo-hlr_10.42.42.2(pid=4208): Launched 00:57:23.036930 run osmo-stp_10.42.42.5: Starting osmo-stp 00:57:23.576640 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4210): Launched 00:57:23.882992 run osmo-stp_10.42.42.5(pid=4211): Launched 00:57:23.994714 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:57:24.530270 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4213): Launched 00:57:24.639027 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:57:24.906783 run patchelf(pid=4214): Launched 00:57:25.086112 run osmo-stp_10.42.42.5(pid=4211): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4211)] 00:57:25.218134 run osmo-stp_10.42.42.5(pid=4211): stdout: | (launched: 2022-12-09_00:57:23.731944) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:57:25.350564 run osmo-stp_10.42.42.5(pid=4211): stderr: | �[0;m�[38;5;43m20221209005723904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005723904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005723904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005723905 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005723905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005723905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005723905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:57:25.477549 run osmo-stp_10.42.42.5(pid=4211): stdout: | (launched: 2022-12-09_00:57:23.731944) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:57:25.603203 run osmo-stp_10.42.42.5(pid=4211): stderr: | �[0;m�[38;5;43m20221209005723904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005723904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005723904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005723905 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005723905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005723905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005723905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:57:25.749859 run patchelf(pid=4214): Terminating (SIGINT) 00:57:25.921611 run patchelf(pid=4214): Terminated: ok {rc=0} 00:57:25.953186 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4211): Process ended prematurely: osmo-stp_10.42.42.5(pid=4211) [trial-2352↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4211)] [trial-2352↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:57:25.962542 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 00:57:26.023470 run osmo-hlr_10.42.42.2(pid=4208): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4208)] 00:57:26.072600 run osmo-hlr_10.42.42.2(pid=4208): stdout: | (launched: 2022-12-09_00:57:22.771259) 00:57:26.122693 run osmo-hlr_10.42.42.2(pid=4208): stderr: | �[0;m�[1;31m20221209005722947 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209005722947 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209005722947 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209005722947 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209005722947 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209005722947 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209005722959 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209005722968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209005722968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209005722968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:57:26.164929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4201): Terminating (SIGTERM) 00:57:26.205191 run iperf3-srv_10.42.42.10(pid=4202): Terminating (SIGTERM) 00:57:26.245463 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4203): Terminating (SIGTERM) 00:57:26.285833 run iperf3-srv_10.42.42.10(pid=4204): Terminating (SIGTERM) 00:57:26.326372 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4207): Terminating (SIGTERM) 00:57:26.366881 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4210): Terminating (SIGTERM) 00:57:26.407033 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4213): Terminating (SIGTERM) 00:57:26.416677 --- ParallelTerminationStrategy: PID 4201 died... 00:57:26.470512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4201): Terminated: ok {rc=0} 00:57:26.480365 --- ParallelTerminationStrategy: PID 4202 died... 00:57:26.533819 run iperf3-srv_10.42.42.10(pid=4202): Terminated {rc=256} 00:57:26.543472 --- ParallelTerminationStrategy: PID 4203 died... 00:57:26.596524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4203): Terminated: ok {rc=0} 00:57:26.606254 --- ParallelTerminationStrategy: PID 4204 died... 00:57:26.659345 run iperf3-srv_10.42.42.10(pid=4204): Terminated {rc=256} 00:57:26.668755 --- ParallelTerminationStrategy: PID 4207 died... 00:57:26.721776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4207): Terminated: ok {rc=0} 00:57:26.731507 --- ParallelTerminationStrategy: PID 4210 died... 00:57:26.784730 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4210): Terminated: ok {rc=0} 00:57:26.794625 --- ParallelTerminationStrategy: PID 4213 died... 00:57:26.847668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4213): Terminated: ok {rc=0} 00:57:26.936008 bus /gobi_0: Setting Powered False 00:57:28.040187 bus /gobi_0: Setting Powered False 00:57:29.151312 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4211): Process ended prematurely: osmo-stp_10.42.42.5(pid=4211) [trial-2352↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4211)]