Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3324): Process ended prematurely: osmo-stp_10.42.42.5(pid=3324) [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)]
Standard Output
---------------------------------------------- trial-2352 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:48:18.930316 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:18.941694 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:48:19.095444 tst cs_paging_gprs_active.py: using LAC 17906 00:48:19.227503 tst cs_paging_gprs_active.py: using RAC 56 00:48:19.359751 tst cs_paging_gprs_active.py: using CellId 17906 00:48:19.493767 tst cs_paging_gprs_active.py: using BVCI 17907 00:48:19.519541 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.530995 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.542324 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.553646 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.564752 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.575958 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.587332 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.598496 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:19.610009 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:48:19.733669 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:48:20.033912 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:48:20.175074 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:48:20.525805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3314): Launched 00:48:20.816541 run iperf3-srv_10.42.42.10(pid=3315): Launched 00:48:21.022316 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:48:21.162692 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:48:21.512758 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3316): Launched 00:48:21.803002 run iperf3-srv_10.42.42.10(pid=3317): Launched 00:48:22.009560 tst cs_paging_gprs_active.py:38: start network... 00:48:22.150688 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:48:22.690246 run create_hlr_db(pid=3318): Launched 00:48:22.885223 bus /gobi_6: Setting Powered False 00:48:23.905333 run create_hlr_db(pid=3318): Terminated: ok {rc=0} 00:48:24.329734 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3320): Launched 00:48:24.646047 run osmo-hlr_10.42.42.2(pid=3321): Launched 00:48:24.766311 run osmo-stp_10.42.42.5: Starting osmo-stp 00:48:25.310606 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3323): Launched 00:48:25.625750 run osmo-stp_10.42.42.5(pid=3324): Launched 00:48:25.739849 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:48:26.286560 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3326): Launched 00:48:26.398502 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:48:26.673864 run patchelf(pid=3327): Launched 00:48:26.856432 run osmo-stp_10.42.42.5(pid=3324): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)] 00:48:26.990712 run osmo-stp_10.42.42.5(pid=3324): stdout: | (launched: 2022-12-09_00:48:25.469832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:27.125580 run osmo-stp_10.42.42.5(pid=3324): stderr: | �[0;m�[38;5;43m20221209004825644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004825644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004825644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004825645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004825647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004825647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004825647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:27.254853 run osmo-stp_10.42.42.5(pid=3324): stdout: | (launched: 2022-12-09_00:48:25.469832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:27.382860 run osmo-stp_10.42.42.5(pid=3324): stderr: | �[0;m�[38;5;43m20221209004825644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004825644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004825644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004825645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004825647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004825647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004825647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:27.532477 run patchelf(pid=3327): Terminating (SIGINT) 00:48:27.708632 run patchelf(pid=3327): Terminated: ok {rc=0} 00:48:27.740768 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3324): Process ended prematurely: osmo-stp_10.42.42.5(pid=3324) [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)] [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:48:27.750118 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 00:48:27.811936 run osmo-hlr_10.42.42.2(pid=3321): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3321)] 00:48:27.862213 run osmo-hlr_10.42.42.2(pid=3321): stdout: | (launched: 2022-12-09_00:48:24.489414) 00:48:27.913023 run osmo-hlr_10.42.42.2(pid=3321): stderr: | �[0;m�[1;31m20221209004824671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209004824671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209004824671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209004824671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209004824671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209004824672 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209004824684 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209004824694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209004824694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209004824694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:48:27.955789 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3314): Terminating (SIGTERM) 00:48:27.996326 run iperf3-srv_10.42.42.10(pid=3315): Terminating (SIGTERM) 00:48:28.036896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3316): Terminating (SIGTERM) 00:48:28.077338 run iperf3-srv_10.42.42.10(pid=3317): Terminating (SIGTERM) 00:48:28.117977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3320): Terminating (SIGTERM) 00:48:28.158859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3323): Terminating (SIGTERM) 00:48:28.199367 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3326): Terminating (SIGTERM) 00:48:28.209002 --- ParallelTerminationStrategy: PID 3314 died... 00:48:28.263358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3314): Terminated: ok {rc=0} 00:48:28.273351 --- ParallelTerminationStrategy: PID 3315 died... 00:48:28.327365 run iperf3-srv_10.42.42.10(pid=3315): Terminated {rc=256} 00:48:28.337374 --- ParallelTerminationStrategy: PID 3316 died... 00:48:28.391339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3316): Terminated: ok {rc=0} 00:48:28.401343 --- ParallelTerminationStrategy: PID 3317 died... 00:48:28.455354 run iperf3-srv_10.42.42.10(pid=3317): Terminated {rc=256} 00:48:28.465423 --- ParallelTerminationStrategy: PID 3320 died... 00:48:28.519554 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3320): Terminated: ok {rc=0} 00:48:28.529792 --- ParallelTerminationStrategy: PID 3323 died... 00:48:28.583792 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3323): Terminated: ok {rc=0} 00:48:28.593790 --- ParallelTerminationStrategy: PID 3326 died... 00:48:28.647738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3326): Terminated: ok {rc=0} 00:48:28.738494 bus /gobi_0: Setting Powered False 00:48:29.842784 bus /gobi_0: Setting Powered False 00:48:30.964579 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3324): Process ended prematurely: osmo-stp_10.42.42.5(pid=3324) [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3324)]