Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3393): Process ended prematurely: osmo-stp_10.42.42.5(pid=3393) [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3393)]
Standard Output
---------------------------------------------- trial-2352 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:49:19.921218 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:19.931970 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:49:20.079634 tst cs_paging_gprs_active.py: using LAC 17911 00:49:20.203971 tst cs_paging_gprs_active.py: using RAC 61 00:49:20.328116 tst cs_paging_gprs_active.py: using CellId 17911 00:49:20.452770 tst cs_paging_gprs_active.py: using BVCI 17912 00:49:20.476643 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.487629 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.498330 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.509346 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.520173 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.531225 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.542232 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.553235 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:20.564410 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:49:20.685469 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:49:20.985317 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:49:21.126003 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:49:21.475709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3382): Launched 00:49:21.767157 run iperf3-srv_10.42.42.10(pid=3383): Launched 00:49:21.974255 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:49:22.115501 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:49:22.468415 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3384): Launched 00:49:22.759327 run iperf3-srv_10.42.42.10(pid=3385): Launched 00:49:22.966009 tst cs_paging_gprs_active.py:38: start network... 00:49:23.107106 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:49:23.648617 run create_hlr_db(pid=3386): Launched 00:49:23.843864 bus /gobi_6: Setting Powered False 00:49:24.863203 run create_hlr_db(pid=3386): Terminated: ok {rc=0} 00:49:25.282910 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3389): Launched 00:49:25.597827 run osmo-hlr_10.42.42.2(pid=3390): Launched 00:49:25.717376 run osmo-stp_10.42.42.5: Starting osmo-stp 00:49:26.268548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3392): Launched 00:49:26.582882 run osmo-stp_10.42.42.5(pid=3393): Launched 00:49:26.696382 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:49:27.240851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3395): Launched 00:49:27.352085 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:49:27.627024 run patchelf(pid=3396): Launched 00:49:27.809899 run osmo-stp_10.42.42.5(pid=3393): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3393)] 00:49:27.944179 run osmo-stp_10.42.42.5(pid=3393): stdout: | (launched: 2022-12-09_00:49:26.427079) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:28.078766 run osmo-stp_10.42.42.5(pid=3393): stderr: | �[0;m�[38;5;43m20221209004926600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004926601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004926601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004926602 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004926602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004926602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004926602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:28.207524 run osmo-stp_10.42.42.5(pid=3393): stdout: | (launched: 2022-12-09_00:49:26.427079) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:28.335059 run osmo-stp_10.42.42.5(pid=3393): stderr: | �[0;m�[38;5;43m20221209004926600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004926601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004926601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004926602 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004926602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004926602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004926602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:28.484356 run patchelf(pid=3396): Terminating (SIGINT) 00:49:28.660667 run patchelf(pid=3396): Terminated: ok {rc=0} 00:49:28.692855 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3393): Process ended prematurely: osmo-stp_10.42.42.5(pid=3393) [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3393)] [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:49:28.702345 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:49:28.763383 run osmo-hlr_10.42.42.2(pid=3390): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3390)] 00:49:28.813189 run osmo-hlr_10.42.42.2(pid=3390): stdout: | (launched: 2022-12-09_00:49:25.441459) 00:49:28.863372 run osmo-hlr_10.42.42.2(pid=3390): stderr: | �[0;m�[1;31m20221209004925620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209004925620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209004925620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209004925620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209004925620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209004925620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209004925636 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209004925648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209004925648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209004925648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:49:28.905928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3382): Terminating (SIGTERM) 00:49:28.946319 run iperf3-srv_10.42.42.10(pid=3383): Terminating (SIGTERM) 00:49:28.986997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3384): Terminating (SIGTERM) 00:49:29.027138 run iperf3-srv_10.42.42.10(pid=3385): Terminating (SIGTERM) 00:49:29.067445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3389): Terminating (SIGTERM) 00:49:29.107796 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3392): Terminating (SIGTERM) 00:49:29.147932 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3395): Terminating (SIGTERM) 00:49:29.157431 --- ParallelTerminationStrategy: PID 3382 died... 00:49:29.211311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3382): Terminated: ok {rc=0} 00:49:29.221174 --- ParallelTerminationStrategy: PID 3383 died... 00:49:29.274778 run iperf3-srv_10.42.42.10(pid=3383): Terminated {rc=256} 00:49:29.284627 --- ParallelTerminationStrategy: PID 3384 died... 00:49:29.338147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3384): Terminated: ok {rc=0} 00:49:29.347899 --- ParallelTerminationStrategy: PID 3385 died... 00:49:29.401421 run iperf3-srv_10.42.42.10(pid=3385): Terminated {rc=256} 00:49:29.411308 --- ParallelTerminationStrategy: PID 3389 died... 00:49:29.464794 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3389): Terminated: ok {rc=0} 00:49:29.474645 --- ParallelTerminationStrategy: PID 3392 died... 00:49:29.528767 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3392): Terminated: ok {rc=0} 00:49:29.538411 --- ParallelTerminationStrategy: PID 3395 died... 00:49:29.591883 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3395): Terminated: ok {rc=0} 00:49:29.680510 bus /gobi_0: Setting Powered False 00:49:30.782703 bus /gobi_0: Setting Powered False 00:49:31.920587 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3393): Process ended prematurely: osmo-stp_10.42.42.5(pid=3393) [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3393)]