Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4821): Process ended prematurely: osmo-stp_10.42.42.5(pid=4821) [trial-2352↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4821)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:05:53.878434 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:53.889209 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:05:54.053761 tst cs_paging_gprs_active.py: using LAC 17999 01:05:54.183234 tst cs_paging_gprs_active.py: using RAC 149 01:05:54.312579 tst cs_paging_gprs_active.py: using CellId 17999 01:05:54.439570 tst cs_paging_gprs_active.py: using BVCI 18000 01:05:54.465131 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.476568 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.487874 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.499114 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.510297 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.521592 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.532896 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.544074 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:54.555999 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:05:54.672750 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:05:54.949342 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:05:55.076155 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:05:55.391738 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4811): Launched 01:05:55.654455 run iperf3-srv_10.42.42.10(pid=4812): Launched 01:05:55.839609 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:05:55.965943 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:05:56.281792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4813): Launched 01:05:56.544548 run iperf3-srv_10.42.42.10(pid=4814): Launched 01:05:56.729207 tst cs_paging_gprs_active.py:38: start network... 01:05:56.855427 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:05:57.336849 run create_hlr_db(pid=4815): Launched 01:05:57.511595 bus /gobi_6: Setting Powered False 01:05:58.534048 run create_hlr_db(pid=4815): Terminated: ok {rc=0} 01:05:58.967766 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4817): Launched 01:05:59.293053 run osmo-hlr_10.42.42.2(pid=4818): Launched 01:05:59.418142 run osmo-stp_10.42.42.5: Starting osmo-stp 01:05:59.982162 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4820): Launched 01:06:00.306842 run osmo-stp_10.42.42.5(pid=4821): Launched 01:06:00.425628 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:06:01.068082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4823): Launched 01:06:01.188334 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:06:01.488528 run patchelf(pid=4824): Launched 01:06:01.685706 run osmo-stp_10.42.42.5(pid=4821): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4821)] 01:06:01.829756 run osmo-stp_10.42.42.5(pid=4821): stdout: | (launched: 2022-12-09_01:06:00.147629) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:01.974833 run osmo-stp_10.42.42.5(pid=4821): stderr: | �[0;m�[38;5;43m20221209010600335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010600335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010600335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010600336 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010600336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010600336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010600336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:02.113059 run osmo-stp_10.42.42.5(pid=4821): stdout: | (launched: 2022-12-09_01:06:00.147629) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:02.247274 run osmo-stp_10.42.42.5(pid=4821): stderr: | �[0;m�[38;5;43m20221209010600335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010600335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010600335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010600336 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010600336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010600336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010600336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:02.404221 run patchelf(pid=4824): Terminating (SIGINT) 01:06:02.589189 run patchelf(pid=4824): Terminated: ok {rc=0} 01:06:02.622958 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4821): Process ended prematurely: osmo-stp_10.42.42.5(pid=4821) [trial-2352↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4821)] [trial-2352↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:06:02.633058 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:06:02.696442 run osmo-hlr_10.42.42.2(pid=4818): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4818)] 01:06:02.748212 run osmo-hlr_10.42.42.2(pid=4818): stdout: | (launched: 2022-12-09_01:05:59.133696) 01:06:02.800410 run osmo-hlr_10.42.42.2(pid=4818): stderr: | �[0;m�[1;31m20221209010559331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209010559331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209010559331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209010559331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209010559331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209010559331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209010559343 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209010559352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209010559352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209010559352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:06:02.845337 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4811): Terminating (SIGTERM) 01:06:02.887397 run iperf3-srv_10.42.42.10(pid=4812): Terminating (SIGTERM) 01:06:02.929904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4813): Terminating (SIGTERM) 01:06:02.972028 run iperf3-srv_10.42.42.10(pid=4814): Terminating (SIGTERM) 01:06:03.014719 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4817): Terminating (SIGTERM) 01:06:03.056880 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4820): Terminating (SIGTERM) 01:06:03.099100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4823): Terminating (SIGTERM) 01:06:03.108786 --- ParallelTerminationStrategy: PID 4811 died... 01:06:03.165233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4811): Terminated: ok {rc=0} 01:06:03.175480 --- ParallelTerminationStrategy: PID 4812 died... 01:06:03.231905 run iperf3-srv_10.42.42.10(pid=4812): Terminated {rc=256} 01:06:03.242220 --- ParallelTerminationStrategy: PID 4813 died... 01:06:03.298365 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4813): Terminated: ok {rc=0} 01:06:03.308614 --- ParallelTerminationStrategy: PID 4814 died... 01:06:03.364687 run iperf3-srv_10.42.42.10(pid=4814): Terminated {rc=256} 01:06:03.374919 --- ParallelTerminationStrategy: PID 4817 died... 01:06:03.430854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4817): Terminated: ok {rc=0} 01:06:03.440928 --- ParallelTerminationStrategy: PID 4820 died... 01:06:03.496988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4820): Terminated: ok {rc=0} 01:06:03.507052 --- ParallelTerminationStrategy: PID 4823 died... 01:06:03.562960 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4823): Terminated: ok {rc=0} 01:06:03.649757 bus /gobi_0: Setting Powered False 01:06:04.751983 bus /gobi_0: Setting Powered False 01:06:05.862694 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4821): Process ended prematurely: osmo-stp_10.42.42.5(pid=4821) [trial-2352↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4821)]