Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4678): Process ended prematurely: osmo-stp_10.42.42.5(pid=4678) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4678)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:03:53.375975 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:53.386758 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:03:53.526216 tst cs_paging_gprs_active.py: using LAC 17989 01:03:53.653879 tst cs_paging_gprs_active.py: using RAC 139 01:03:53.781468 tst cs_paging_gprs_active.py: using CellId 17989 01:03:53.916292 tst cs_paging_gprs_active.py: using BVCI 17990 01:03:53.941376 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:53.953086 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:53.964306 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:53.976181 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:53.987237 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:53.998859 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:54.010793 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:54.021985 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:54.033366 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:03:54.151920 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:03:54.449213 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:03:54.586976 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:03:54.930063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4668): Launched 01:03:55.214213 run iperf3-srv_10.42.42.10(pid=4669): Launched 01:03:55.416126 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:03:55.554492 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:03:55.897310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4670): Launched 01:03:56.181832 run iperf3-srv_10.42.42.10(pid=4671): Launched 01:03:56.384560 tst cs_paging_gprs_active.py:38: start network... 01:03:56.522856 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:03:57.050682 run create_hlr_db(pid=4672): Launched 01:03:57.241111 bus /gobi_6: Setting Powered False 01:03:58.260551 run create_hlr_db(pid=4672): Terminated: ok {rc=0} 01:03:58.697786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4674): Launched 01:03:59.027453 run osmo-hlr_10.42.42.2(pid=4675): Launched 01:03:59.146511 run osmo-stp_10.42.42.5: Starting osmo-stp 01:03:59.717251 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4677): Launched 01:04:00.048791 run osmo-stp_10.42.42.5(pid=4678): Launched 01:04:00.168025 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:04:00.743620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4680): Launched 01:04:00.869185 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:04:01.171064 run patchelf(pid=4681): Launched 01:04:01.366213 run osmo-stp_10.42.42.5(pid=4678): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4678)] 01:04:01.509778 run osmo-stp_10.42.42.5(pid=4678): stdout: | (launched: 2022-12-09_01:03:59.885224) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:01.654448 run osmo-stp_10.42.42.5(pid=4678): stderr: | �[0;m�[38;5;43m20221209010400079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010400079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010400079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010400080 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010400080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010400080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010400080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:01.792587 run osmo-stp_10.42.42.5(pid=4678): stdout: | (launched: 2022-12-09_01:03:59.885224) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:01.929272 run osmo-stp_10.42.42.5(pid=4678): stderr: | �[0;m�[38;5;43m20221209010400079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010400079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010400079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010400080 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010400080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010400080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010400080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:02.080070 run patchelf(pid=4681): Terminating (SIGINT) 01:04:02.259848 run patchelf(pid=4681): Terminated: ok {rc=0} 01:04:02.293254 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4678): Process ended prematurely: osmo-stp_10.42.42.5(pid=4678) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4678)] [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:04:02.305044 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 01:04:02.368702 run osmo-hlr_10.42.42.2(pid=4675): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4675)] 01:04:02.419510 run osmo-hlr_10.42.42.2(pid=4675): stdout: | (launched: 2022-12-09_01:03:58.865226) 01:04:02.470876 run osmo-hlr_10.42.42.2(pid=4675): stderr: | �[0;m�[1;31m20221209010359063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209010359063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209010359063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209010359063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209010359063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209010359063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209010359076 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209010359085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209010359085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209010359085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:04:02.513955 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4668): Terminating (SIGTERM) 01:04:02.555162 run iperf3-srv_10.42.42.10(pid=4669): Terminating (SIGTERM) 01:04:02.597253 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4670): Terminating (SIGTERM) 01:04:02.637606 run iperf3-srv_10.42.42.10(pid=4671): Terminating (SIGTERM) 01:04:02.679566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4674): Terminating (SIGTERM) 01:04:02.721106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4677): Terminating (SIGTERM) 01:04:02.761403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4680): Terminating (SIGTERM) 01:04:02.771157 --- ParallelTerminationStrategy: PID 4668 died... 01:04:02.831007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4668): Terminated: ok {rc=0} 01:04:02.853731 --- ParallelTerminationStrategy: PID 4669 died... 01:04:02.933092 run iperf3-srv_10.42.42.10(pid=4669): Terminated {rc=256} 01:04:02.951285 --- ParallelTerminationStrategy: PID 4670 died... 01:04:03.007310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4670): Terminated: ok {rc=0} 01:04:03.017535 --- ParallelTerminationStrategy: PID 4671 died... 01:04:03.073131 run iperf3-srv_10.42.42.10(pid=4671): Terminated {rc=256} 01:04:03.083252 --- ParallelTerminationStrategy: PID 4674 died... 01:04:03.139772 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4674): Terminated: ok {rc=0} 01:04:03.150067 --- ParallelTerminationStrategy: PID 4677 died... 01:04:03.206101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4677): Terminated: ok {rc=0} 01:04:03.216181 --- ParallelTerminationStrategy: PID 4680 died... 01:04:03.271992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4680): Terminated: ok {rc=0} 01:04:03.359553 bus /gobi_0: Setting Powered False 01:04:04.465817 bus /gobi_0: Setting Powered False 01:04:05.573083 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4678): Process ended prematurely: osmo-stp_10.42.42.5(pid=4678) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4678)]