Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6560): Process ended prematurely: osmo-stp_10.42.42.5(pid=6560) [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6560)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:23:09.550552 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:09.563015 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:23:09.735159 tst cs_paging_gprs_active.py: using LAC 18090 01:23:09.865757 tst cs_paging_gprs_active.py: using RAC 240 01:23:09.994854 tst cs_paging_gprs_active.py: using CellId 18090 01:23:10.123227 tst cs_paging_gprs_active.py: using BVCI 18091 01:23:10.149537 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.161816 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.174251 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.186607 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.199404 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.211850 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.225135 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.238278 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:23:10.252321 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:23:10.377966 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:23:10.688563 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:23:10.828759 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:11.186450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6550): Launched 01:23:11.492431 run iperf3-srv_10.42.42.10(pid=6551): Launched 01:23:11.700631 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:23:11.841408 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:12.200009 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6552): Launched 01:23:12.504760 run iperf3-srv_10.42.42.10(pid=6553): Launched 01:23:12.710846 tst cs_paging_gprs_active.py:38: start network... 01:23:12.850318 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:23:13.415716 run create_hlr_db(pid=6554): Launched 01:23:13.610039 bus /gobi_6: Setting Powered False 01:23:14.631731 run create_hlr_db(pid=6554): Terminated: ok {rc=0} 01:23:15.090129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6556): Launched 01:23:15.531584 run osmo-hlr_10.42.42.2(pid=6557): Launched 01:23:15.774592 run osmo-stp_10.42.42.5: Starting osmo-stp 01:23:16.448613 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6559): Launched 01:23:16.949437 run osmo-stp_10.42.42.5(pid=6560): Launched 01:23:17.198425 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:23:17.908528 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6562): Launched 01:23:18.053306 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:23:18.390479 run patchelf(pid=6563): Launched 01:23:18.587238 run osmo-stp_10.42.42.5(pid=6560): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6560)] 01:23:18.733200 run osmo-stp_10.42.42.5(pid=6560): stdout: | (launched: 2022-12-09_01:23:16.659682) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:18.877158 run osmo-stp_10.42.42.5(pid=6560): stderr: | �[0;m�[38;5;43m20221209012317007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012317007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012317007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012317008 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012317008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012317008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012317008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:19.016209 run osmo-stp_10.42.42.5(pid=6560): stdout: | (launched: 2022-12-09_01:23:16.659682) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:19.153428 run osmo-stp_10.42.42.5(pid=6560): stderr: | �[0;m�[38;5;43m20221209012317007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012317007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012317007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012317008 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012317008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012317008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012317008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:19.314570 run patchelf(pid=6563): Terminating (SIGINT) 01:23:19.503983 run patchelf(pid=6563): Terminated: ok {rc=0} 01:23:19.539521 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6560): Process ended prematurely: osmo-stp_10.42.42.5(pid=6560) [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6560)] [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:23:19.550494 tst cs_paging_gprs_active.py:38: Test FAILED (10.0 sec) 01:23:19.616564 run osmo-hlr_10.42.42.2(pid=6557): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6557)] 01:23:19.672611 run osmo-hlr_10.42.42.2(pid=6557): stdout: | (launched: 2022-12-09_01:23:15.260371) 01:23:19.726540 run osmo-hlr_10.42.42.2(pid=6557): stderr: | �[0;m�[1;31m20221209012315562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209012315562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209012315562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209012315562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209012315562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209012315562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209012315585 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209012315601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209012315601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209012315601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:23:19.772666 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6550): Terminating (SIGTERM) 01:23:19.818144 run iperf3-srv_10.42.42.10(pid=6551): Terminating (SIGTERM) 01:23:19.864691 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6552): Terminating (SIGTERM) 01:23:19.911020 run iperf3-srv_10.42.42.10(pid=6553): Terminating (SIGTERM) 01:23:19.956813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6556): Terminating (SIGTERM) 01:23:20.003463 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6559): Terminating (SIGTERM) 01:23:20.049798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6562): Terminating (SIGTERM) 01:23:20.060740 --- ParallelTerminationStrategy: PID 6550 died... 01:23:20.119610 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6550): Terminated: ok {rc=0} 01:23:20.130726 --- ParallelTerminationStrategy: PID 6551 died... 01:23:20.188629 run iperf3-srv_10.42.42.10(pid=6551): Terminated {rc=256} 01:23:20.199485 --- ParallelTerminationStrategy: PID 6552 died... 01:23:20.259227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6552): Terminated: ok {rc=0} 01:23:20.270086 --- ParallelTerminationStrategy: PID 6553 died... 01:23:20.328167 run iperf3-srv_10.42.42.10(pid=6553): Terminated {rc=256} 01:23:20.339057 --- ParallelTerminationStrategy: PID 6556 died... 01:23:20.396640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6556): Terminated: ok {rc=0} 01:23:20.407886 --- ParallelTerminationStrategy: PID 6559 died... 01:23:20.467785 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6559): Terminated: ok {rc=0} 01:23:20.478601 --- ParallelTerminationStrategy: PID 6562 died... 01:23:20.537016 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6562): Terminated: ok {rc=0} 01:23:20.628893 bus /gobi_0: Setting Powered False 01:23:21.735830 bus /gobi_0: Setting Powered False 01:23:22.848383 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6560): Process ended prematurely: osmo-stp_10.42.42.5(pid=6560) [trial-2352↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6560)]