Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20521): Process ended prematurely: osmo-stp_10.42.42.5(pid=20521) [trial-2354↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20521)]
Standard Output
---------------------------------------------- trial-2354 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 03:50:51.495873 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:51.506661 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:50:51.654854 tst cs_paging_gprs_active.py: using LAC 18870 03:50:51.780357 tst cs_paging_gprs_active.py: using RAC 255 03:50:51.903679 tst cs_paging_gprs_active.py: using CellId 18870 03:50:52.027075 tst cs_paging_gprs_active.py: using BVCI 18871 03:50:52.051766 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.063405 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.074410 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.085635 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.096485 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.107733 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.118993 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.130670 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:52.142153 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:50:52.258236 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:50:52.551986 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:50:52.686004 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:50:53.017575 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20511): Launched 03:50:53.292932 run iperf3-srv_10.42.42.10(pid=20512): Launched 03:50:53.489590 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:50:53.623649 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:50:53.955224 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20513): Launched 03:50:54.230706 run iperf3-srv_10.42.42.10(pid=20514): Launched 03:50:54.426968 tst cs_paging_gprs_active.py:38: start network... 03:50:54.560622 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:50:55.063600 run create_hlr_db(pid=20515): Launched 03:50:55.248351 bus /gobi_6: Setting Powered False 03:50:56.271372 run create_hlr_db(pid=20515): Terminated: ok {rc=0} 03:50:56.672049 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20517): Launched 03:50:56.971104 run osmo-hlr_10.42.42.2(pid=20518): Launched 03:50:57.085690 run osmo-stp_10.42.42.5: Starting osmo-stp 03:50:57.611747 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20520): Launched 03:50:57.909734 run osmo-stp_10.42.42.5(pid=20521): Launched 03:50:58.018306 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:50:58.537081 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20523): Launched 03:50:58.643122 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:50:58.902881 run patchelf(pid=20524): Launched 03:50:59.077814 run osmo-stp_10.42.42.5(pid=20521): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20521)] 03:50:59.206121 run osmo-stp_10.42.42.5(pid=20521): stdout: | (launched: 2022-12-09_03:50:57.763408) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:50:59.333987 run osmo-stp_10.42.42.5(pid=20521): stderr: | �[0;m�[38;5;43m20221209035057931 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035057931 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035057932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035057932 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035057932 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035057932 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035057933 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:50:59.457520 run osmo-stp_10.42.42.5(pid=20521): stdout: | (launched: 2022-12-09_03:50:57.763408) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:50:59.579801 run osmo-stp_10.42.42.5(pid=20521): stderr: | �[0;m�[38;5;43m20221209035057931 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035057931 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035057932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035057932 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035057932 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035057932 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035057933 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:50:59.722913 run patchelf(pid=20524): Terminating (SIGINT) 03:50:59.892195 run patchelf(pid=20524): Terminated: ok {rc=0} 03:50:59.923243 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20521): Process ended prematurely: osmo-stp_10.42.42.5(pid=20521) [trial-2354↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20521)] [trial-2354↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 03:50:59.932200 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 03:50:59.992046 run osmo-hlr_10.42.42.2(pid=20518): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20518)] 03:51:00.040869 run osmo-hlr_10.42.42.2(pid=20518): stdout: | (launched: 2022-12-09_03:50:56.823826) 03:51:00.090464 run osmo-hlr_10.42.42.2(pid=20518): stderr: | �[0;m�[1;31m20221209035056997 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035056997 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035056997 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035056997 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035056997 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035056997 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035057009 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035057018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035057018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035057019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:51:00.132751 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20511): Terminating (SIGTERM) 03:51:00.172520 run iperf3-srv_10.42.42.10(pid=20512): Terminating (SIGTERM) 03:51:00.212038 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20513): Terminating (SIGTERM) 03:51:00.251537 run iperf3-srv_10.42.42.10(pid=20514): Terminating (SIGTERM) 03:51:00.291398 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20517): Terminating (SIGTERM) 03:51:00.330994 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20520): Terminating (SIGTERM) 03:51:00.370556 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20523): Terminating (SIGTERM) 03:51:00.379619 --- ParallelTerminationStrategy: PID 20511 died... 03:51:00.432780 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20511): Terminated: ok {rc=0} 03:51:00.442354 --- ParallelTerminationStrategy: PID 20512 died... 03:51:00.494981 run iperf3-srv_10.42.42.10(pid=20512): Terminated {rc=256} 03:51:00.504394 --- ParallelTerminationStrategy: PID 20513 died... 03:51:00.556896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20513): Terminated: ok {rc=0} 03:51:00.566400 --- ParallelTerminationStrategy: PID 20514 died... 03:51:00.618875 run iperf3-srv_10.42.42.10(pid=20514): Terminated {rc=256} 03:51:00.628257 --- ParallelTerminationStrategy: PID 20517 died... 03:51:00.681169 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20517): Terminated: ok {rc=0} 03:51:00.690598 --- ParallelTerminationStrategy: PID 20520 died... 03:51:00.743294 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20520): Terminated: ok {rc=0} 03:51:00.752779 --- ParallelTerminationStrategy: PID 20523 died... 03:51:00.805515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20523): Terminated: ok {rc=0} 03:51:00.905363 bus /gobi_0: Setting Powered False 03:51:02.017739 bus /gobi_0: Setting Powered False 03:51:03.128851 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20521): Process ended prematurely: osmo-stp_10.42.42.5(pid=20521) [trial-2354↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20521)]