Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20039): Process ended prematurely: osmo-stp_10.42.42.5(pid=20039) [trial-2354↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20039)]
Standard Output
---------------------------------------------- trial-2354 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 03:44:02.201571 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.213751 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:44:02.367722 tst cs_paging_gprs_active.py: using LAC 18833 03:44:02.491378 tst cs_paging_gprs_active.py: using RAC 218 03:44:02.615654 tst cs_paging_gprs_active.py: using CellId 18833 03:44:02.738619 tst cs_paging_gprs_active.py: using BVCI 18834 03:44:02.762410 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.773382 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.784100 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.795580 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.806869 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.818126 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.829499 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.840401 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:44:02.851715 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:44:02.973569 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:44:03.259902 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:44:03.388247 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:44:03.709078 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20029): Launched 03:44:03.977240 run iperf3-srv_10.42.42.10(pid=20030): Launched 03:44:04.164695 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:44:04.292566 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:44:04.613300 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20031): Launched 03:44:04.880235 run iperf3-srv_10.42.42.10(pid=20032): Launched 03:44:05.067627 tst cs_paging_gprs_active.py:38: start network... 03:44:05.196935 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:44:05.693134 run create_hlr_db(pid=20033): Launched 03:44:05.870912 bus /gobi_6: Setting Powered False 03:44:06.905707 run create_hlr_db(pid=20033): Terminated: ok {rc=0} 03:44:07.346710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20035): Launched 03:44:07.680528 run osmo-hlr_10.42.42.2(pid=20036): Launched 03:44:07.806566 run osmo-stp_10.42.42.5: Starting osmo-stp 03:44:08.382680 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20038): Launched 03:44:08.715125 run osmo-stp_10.42.42.5(pid=20039): Launched 03:44:08.834996 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:44:09.413402 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20041): Launched 03:44:09.531724 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:44:09.825126 run patchelf(pid=20042): Launched 03:44:10.018912 run osmo-stp_10.42.42.5(pid=20039): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20039)] 03:44:10.160563 run osmo-stp_10.42.42.5(pid=20039): stdout: | (launched: 2022-12-09_03:44:08.551270) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:44:10.302097 run osmo-stp_10.42.42.5(pid=20039): stderr: | �[0;m�[38;5;43m20221209034408750 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209034408751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209034408751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209034408751 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209034408752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209034408752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209034408752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:44:10.439323 run osmo-stp_10.42.42.5(pid=20039): stdout: | (launched: 2022-12-09_03:44:08.551270) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:44:10.575846 run osmo-stp_10.42.42.5(pid=20039): stderr: | �[0;m�[38;5;43m20221209034408750 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209034408751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209034408751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209034408751 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209034408752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209034408752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209034408752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:44:10.734695 run patchelf(pid=20042): Terminating (SIGINT) 03:44:10.921143 run patchelf(pid=20042): Terminated: ok {rc=0} 03:44:10.955130 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20039): Process ended prematurely: osmo-stp_10.42.42.5(pid=20039) [trial-2354↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20039)] [trial-2354↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 03:44:10.964937 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 03:44:11.029973 run osmo-hlr_10.42.42.2(pid=20036): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20036)] 03:44:11.082650 run osmo-hlr_10.42.42.2(pid=20036): stdout: | (launched: 2022-12-09_03:44:07.515649) 03:44:11.135973 run osmo-hlr_10.42.42.2(pid=20036): stderr: | �[0;m�[1;31m20221209034407718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209034407718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209034407718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209034407718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209034407718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209034407718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209034407734 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209034407742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209034407742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209034407742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:44:11.181146 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20029): Terminating (SIGTERM) 03:44:11.223972 run iperf3-srv_10.42.42.10(pid=20030): Terminating (SIGTERM) 03:44:11.266961 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20031): Terminating (SIGTERM) 03:44:11.309873 run iperf3-srv_10.42.42.10(pid=20032): Terminating (SIGTERM) 03:44:11.352647 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20035): Terminating (SIGTERM) 03:44:11.395775 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20038): Terminating (SIGTERM) 03:44:11.438644 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20041): Terminating (SIGTERM) 03:44:11.448143 --- ParallelTerminationStrategy: PID 20029 died... 03:44:11.504856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20029): Terminated: ok {rc=0} 03:44:11.515264 --- ParallelTerminationStrategy: PID 20030 died... 03:44:11.572128 run iperf3-srv_10.42.42.10(pid=20030): Terminated {rc=256} 03:44:11.582337 --- ParallelTerminationStrategy: PID 20031 died... 03:44:11.639167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20031): Terminated: ok {rc=0} 03:44:11.649446 --- ParallelTerminationStrategy: PID 20032 died... 03:44:11.706074 run iperf3-srv_10.42.42.10(pid=20032): Terminated {rc=256} 03:44:11.716190 --- ParallelTerminationStrategy: PID 20035 died... 03:44:11.772812 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20035): Terminated: ok {rc=0} 03:44:11.783082 --- ParallelTerminationStrategy: PID 20038 died... 03:44:11.840011 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20038): Terminated: ok {rc=0} 03:44:11.850201 --- ParallelTerminationStrategy: PID 20041 died... 03:44:11.907170 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20041): Terminated: ok {rc=0} 03:44:11.995712 bus /gobi_0: Setting Powered False 03:44:13.104548 bus /gobi_0: Setting Powered False 03:44:14.214017 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20039): Process ended prematurely: osmo-stp_10.42.42.5(pid=20039) [trial-2354↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20039)]