Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21329): Process ended prematurely: osmo-stp_10.42.42.5(pid=21329) [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21329)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 03:58:26.991189 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.002567 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:58:27.143338 tst cs_paging_gprs_active.py: using LAC 18911 03:58:27.265989 tst cs_paging_gprs_active.py: using RAC 41 03:58:27.388302 tst cs_paging_gprs_active.py: using CellId 18911 03:58:27.517086 tst cs_paging_gprs_active.py: using BVCI 18912 03:58:27.542304 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.553909 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.565131 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.576375 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.587817 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.599151 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.610574 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.621853 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:58:27.633148 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:58:27.749312 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:58:28.046945 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:58:28.184480 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:58:28.523893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21319): Launched 03:58:28.805768 run iperf3-srv_10.42.42.10(pid=21320): Launched 03:58:29.006159 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:58:29.143088 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:58:29.481386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21321): Launched 03:58:29.763467 run iperf3-srv_10.42.42.10(pid=21322): Launched 03:58:29.963212 tst cs_paging_gprs_active.py:38: start network... 03:58:30.100775 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:58:30.614824 run create_hlr_db(pid=21323): Launched 03:58:30.803606 bus /gobi_6: Setting Powered False 03:58:31.829077 run create_hlr_db(pid=21323): Terminated: ok {rc=0} 03:58:32.285612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21325): Launched 03:58:32.615036 run osmo-hlr_10.42.42.2(pid=21326): Launched 03:58:32.730334 run osmo-stp_10.42.42.5: Starting osmo-stp 03:58:33.257912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21328): Launched 03:58:33.560600 run osmo-stp_10.42.42.5(pid=21329): Launched 03:58:33.670052 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:58:34.197558 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21331): Launched 03:58:34.305311 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:58:34.569810 run patchelf(pid=21332): Launched 03:58:34.747994 run osmo-stp_10.42.42.5(pid=21329): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21329)] 03:58:34.878112 run osmo-stp_10.42.42.5(pid=21329): stdout: | (launched: 2022-12-09_03:58:33.411737) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:58:35.008076 run osmo-stp_10.42.42.5(pid=21329): stderr: | �[0;m�[38;5;43m20221209035833584 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035833584 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035833584 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035833585 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035833585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035833585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035833585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:58:35.133924 run osmo-stp_10.42.42.5(pid=21329): stdout: | (launched: 2022-12-09_03:58:33.411737) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:58:35.258776 run osmo-stp_10.42.42.5(pid=21329): stderr: | �[0;m�[38;5;43m20221209035833584 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035833584 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035833584 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035833585 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035833585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035833585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035833585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:58:35.404731 run patchelf(pid=21332): Terminating (SIGINT) 03:58:35.576576 run patchelf(pid=21332): Terminated: ok {rc=0} 03:58:35.608219 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21329): Process ended prematurely: osmo-stp_10.42.42.5(pid=21329) [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21329)] [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 03:58:35.617548 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 03:58:35.677884 run osmo-hlr_10.42.42.2(pid=21326): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21326)] 03:58:35.726998 run osmo-hlr_10.42.42.2(pid=21326): stdout: | (launched: 2022-12-09_03:58:32.452080) 03:58:35.776932 run osmo-hlr_10.42.42.2(pid=21326): stderr: | �[0;m�[1;31m20221209035832654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035832654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035832654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035832654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035832654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035832654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035832667 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035832675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035832675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035832676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:58:35.819426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21319): Terminating (SIGTERM) 03:58:35.859113 run iperf3-srv_10.42.42.10(pid=21320): Terminating (SIGTERM) 03:58:35.898800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21321): Terminating (SIGTERM) 03:58:35.938266 run iperf3-srv_10.42.42.10(pid=21322): Terminating (SIGTERM) 03:58:35.977942 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21325): Terminating (SIGTERM) 03:58:36.017613 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21328): Terminating (SIGTERM) 03:58:36.057401 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21331): Terminating (SIGTERM) 03:58:36.066554 --- ParallelTerminationStrategy: PID 21319 died... 03:58:36.119745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21319): Terminated: ok {rc=0} 03:58:36.129396 --- ParallelTerminationStrategy: PID 21320 died... 03:58:36.183025 run iperf3-srv_10.42.42.10(pid=21320): Terminated {rc=256} 03:58:36.192600 --- ParallelTerminationStrategy: PID 21321 died... 03:58:36.246216 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21321): Terminated: ok {rc=0} 03:58:36.255809 --- ParallelTerminationStrategy: PID 21322 died... 03:58:36.308630 run iperf3-srv_10.42.42.10(pid=21322): Terminated {rc=256} 03:58:36.318226 --- ParallelTerminationStrategy: PID 21325 died... 03:58:36.371426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21325): Terminated: ok {rc=0} 03:58:36.381084 --- ParallelTerminationStrategy: PID 21328 died... 03:58:36.434192 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21328): Terminated: ok {rc=0} 03:58:36.443870 --- ParallelTerminationStrategy: PID 21331 died... 03:58:36.496934 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21331): Terminated: ok {rc=0} 03:58:36.585683 bus /gobi_0: Setting Powered False 03:58:37.690461 bus /gobi_0: Setting Powered False 03:58:38.801361 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21329): Process ended prematurely: osmo-stp_10.42.42.5(pid=21329) [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21329)]