Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21381): Process ended prematurely: osmo-stp_10.42.42.5(pid=21381) [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21381)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 03:59:17.695011 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:17.706482 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:59:17.856692 tst ping_idle_ping.py: using LAC 18915 03:59:17.974834 tst ping_idle_ping.py: using RAC 45 03:59:18.090495 tst ping_idle_ping.py: using CellId 18915 03:59:18.214225 tst ping_idle_ping.py: using BVCI 18916 03:59:18.238948 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:18.250525 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:18.261784 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:18.273971 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:18.286068 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:18.298944 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:18.310473 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:59:18.323166 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:59:18.599869 tst ping_idle_ping.py:24: start network... 03:59:18.723901 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:59:19.205947 run create_hlr_db(pid=21375): Launched 03:59:19.377248 bus /gobi_6: Setting Powered False 03:59:20.412523 run create_hlr_db(pid=21375): Terminated: ok {rc=0} 03:59:20.815291 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21377): Launched 03:59:21.124917 run osmo-hlr_10.42.42.2(pid=21378): Launched 03:59:21.244485 run osmo-stp_10.42.42.5: Starting osmo-stp 03:59:21.804238 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21380): Launched 03:59:22.126055 run osmo-stp_10.42.42.5(pid=21381): Launched 03:59:22.242665 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:59:22.803239 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21383): Launched 03:59:22.918195 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:59:23.199270 run patchelf(pid=21384): Launched 03:59:23.387294 run osmo-stp_10.42.42.5(pid=21381): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21381)] 03:59:23.525065 run osmo-stp_10.42.42.5(pid=21381): stdout: | (launched: 2022-12-09_03:59:21.967421) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:23.663142 run osmo-stp_10.42.42.5(pid=21381): stderr: | �[0;m�[38;5;43m20221209035922160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035922160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035922160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035922160 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035922161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035922161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035922161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:23.796550 run osmo-stp_10.42.42.5(pid=21381): stdout: | (launched: 2022-12-09_03:59:21.967421) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:23.928767 run osmo-stp_10.42.42.5(pid=21381): stderr: | �[0;m�[38;5;43m20221209035922160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035922160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035922160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035922160 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035922161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035922161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035922161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:24.083463 run patchelf(pid=21384): Terminating (SIGINT) 03:59:24.264891 run patchelf(pid=21384): Terminated: ok {rc=0} 03:59:24.297950 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=21381): Process ended prematurely: osmo-stp_10.42.42.5(pid=21381) [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21381)] [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 03:59:24.307273 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 03:59:24.372647 run osmo-hlr_10.42.42.2(pid=21378): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21378)] 03:59:24.425363 run osmo-hlr_10.42.42.2(pid=21378): stdout: | (launched: 2022-12-09_03:59:20.966853) 03:59:24.478843 run osmo-hlr_10.42.42.2(pid=21378): stderr: | �[0;m�[1;31m20221209035921159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035921159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035921159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035921159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035921159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035921159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035921175 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035921184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035921184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035921184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:59:24.523949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21377): Terminating (SIGTERM) 03:59:24.567170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21380): Terminating (SIGTERM) 03:59:24.609704 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21383): Terminating (SIGTERM) 03:59:24.619845 --- ParallelTerminationStrategy: PID 21377 died... 03:59:24.677008 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21377): Terminated: ok {rc=0} 03:59:24.687342 --- ParallelTerminationStrategy: PID 21380 died... 03:59:24.743978 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21380): Terminated: ok {rc=0} 03:59:24.754285 --- ParallelTerminationStrategy: PID 21383 died... 03:59:24.811003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21383): Terminated: ok {rc=0} 03:59:24.899241 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21381): Process ended prematurely: osmo-stp_10.42.42.5(pid=21381) [trial-2354↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21381)]