Failed
gprs:trx-lms+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24347): Process ended prematurely: osmo-stp_10.42.42.5(pid=24347) [trial-2354↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24347)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-lms+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 04:26:14.938435 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:14.949956 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 04:26:15.107977 tst ping_idle_ping.py: using LAC 19058 04:26:15.227633 tst ping_idle_ping.py: using RAC 188 04:26:15.355259 tst ping_idle_ping.py: using CellId 19058 04:26:15.473649 tst ping_idle_ping.py: using BVCI 19059 04:26:15.496448 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:15.507373 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:15.518094 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:15.528798 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:15.539485 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:15.550255 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:15.561082 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:15.571733 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:26:15.863491 tst ping_idle_ping.py:24: start network... 04:26:16.005895 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:26:16.544055 run create_hlr_db(pid=24341): Launched 04:26:16.722180 bus /gobi_6: Setting Powered False 04:26:17.738657 run create_hlr_db(pid=24341): Terminated: ok {rc=0} 04:26:18.163076 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24343): Launched 04:26:18.482688 run osmo-hlr_10.42.42.2(pid=24344): Launched 04:26:18.604158 run osmo-stp_10.42.42.5: Starting osmo-stp 04:26:19.159461 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24346): Launched 04:26:19.478679 run osmo-stp_10.42.42.5(pid=24347): Launched 04:26:19.596123 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:26:20.155166 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24349): Launched 04:26:20.269199 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:26:20.547966 run patchelf(pid=24350): Launched 04:26:20.735325 run osmo-stp_10.42.42.5(pid=24347): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24347)] 04:26:20.873511 run osmo-stp_10.42.42.5(pid=24347): stdout: | (launched: 2022-12-09_04:26:19.321836) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:26:21.011271 run osmo-stp_10.42.42.5(pid=24347): stderr: | �[0;m�[38;5;43m20221209042619514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209042619514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209042619514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209042619515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209042619515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209042619515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209042619515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:26:21.144350 run osmo-stp_10.42.42.5(pid=24347): stdout: | (launched: 2022-12-09_04:26:19.321836) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:26:21.276132 run osmo-stp_10.42.42.5(pid=24347): stderr: | �[0;m�[38;5;43m20221209042619514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209042619514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209042619514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209042619515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209042619515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209042619515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209042619515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:26:21.429628 run patchelf(pid=24350): Terminating (SIGINT) 04:26:21.610033 run patchelf(pid=24350): Terminated: ok {rc=0} 04:26:21.642704 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=24347): Process ended prematurely: osmo-stp_10.42.42.5(pid=24347) [trial-2354↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24347)] [trial-2354↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 04:26:21.652052 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 04:26:21.717025 run osmo-hlr_10.42.42.2(pid=24344): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24344)] 04:26:21.769573 run osmo-hlr_10.42.42.2(pid=24344): stdout: | (launched: 2022-12-09_04:26:18.324894) 04:26:21.823145 run osmo-hlr_10.42.42.2(pid=24344): stderr: | �[0;m�[1;31m20221209042618524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209042618524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209042618524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209042618524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209042618524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209042618525 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209042618539 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-lms+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209042618547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209042618548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209042618548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:26:21.868233 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24343): Terminating (SIGTERM) 04:26:21.911519 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24346): Terminating (SIGTERM) 04:26:21.954123 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24349): Terminating (SIGTERM) 04:26:21.964291 --- ParallelTerminationStrategy: PID 24343 died... 04:26:22.021851 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24343): Terminated: ok {rc=0} 04:26:22.032297 --- ParallelTerminationStrategy: PID 24346 died... 04:26:22.089685 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24346): Terminated: ok {rc=0} 04:26:22.100106 --- ParallelTerminationStrategy: PID 24349 died... 04:26:22.156869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24349): Terminated: ok {rc=0} 04:26:22.246168 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24347): Process ended prematurely: osmo-stp_10.42.42.5(pid=24347) [trial-2354↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24347)]