Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=25239): Process ended prematurely: osmo-stp_10.42.42.5(pid=25239) [trial-2354↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25239)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 04:31:15.027930 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.038577 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 04:31:15.169437 tst cs_paging_gprs_active.py: using LAC 19086 04:31:15.289175 tst cs_paging_gprs_active.py: using RAC 216 04:31:15.408471 tst cs_paging_gprs_active.py: using CellId 19086 04:31:15.525831 tst cs_paging_gprs_active.py: using BVCI 19087 04:31:15.548437 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.559105 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.569587 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.580547 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.591375 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.602173 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.613341 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.624220 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:15.635331 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 04:31:15.752364 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 04:31:16.070914 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:31:16.210377 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:31:16.563113 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25229): Launched 04:31:16.859301 run iperf3-srv_10.42.42.10(pid=25230): Launched 04:31:17.061932 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:31:17.200889 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:31:17.533626 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25231): Launched 04:31:17.809885 run iperf3-srv_10.42.42.10(pid=25232): Launched 04:31:18.006963 tst cs_paging_gprs_active.py:38: start network... 04:31:18.141317 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:31:18.647219 run create_hlr_db(pid=25233): Launched 04:31:18.832648 bus /sierra_2: Setting Powered False 04:31:19.854279 run create_hlr_db(pid=25233): Terminated: ok {rc=0} 04:31:20.281278 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25235): Launched 04:31:20.602632 run osmo-hlr_10.42.42.2(pid=25236): Launched 04:31:20.721204 run osmo-stp_10.42.42.5: Starting osmo-stp 04:31:21.278845 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25238): Launched 04:31:21.598753 run osmo-stp_10.42.42.5(pid=25239): Launched 04:31:21.715368 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:31:22.274388 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25241): Launched 04:31:22.390129 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:31:22.670140 run patchelf(pid=25242): Launched 04:31:22.858272 run osmo-stp_10.42.42.5(pid=25239): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25239)] 04:31:22.995907 run osmo-stp_10.42.42.5(pid=25239): stdout: | (launched: 2022-12-09_04:31:21.441382) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:31:23.134103 run osmo-stp_10.42.42.5(pid=25239): stderr: | �[0;m�[38;5;43m20221209043121632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043121633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043121633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043121633 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043121634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043121634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043121634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:31:23.267286 run osmo-stp_10.42.42.5(pid=25239): stdout: | (launched: 2022-12-09_04:31:21.441382) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:31:23.398889 run osmo-stp_10.42.42.5(pid=25239): stderr: | �[0;m�[38;5;43m20221209043121632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043121633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043121633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043121633 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043121634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043121634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043121634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:31:23.552937 run patchelf(pid=25242): Terminating (SIGINT) 04:31:23.734280 run patchelf(pid=25242): Terminated: ok {rc=0} 04:31:23.767624 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25239): Process ended prematurely: osmo-stp_10.42.42.5(pid=25239) [trial-2354↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25239)] [trial-2354↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 04:31:23.777422 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 04:31:23.841847 run osmo-hlr_10.42.42.2(pid=25236): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25236)] 04:31:23.893962 run osmo-hlr_10.42.42.2(pid=25236): stdout: | (launched: 2022-12-09_04:31:20.444587) 04:31:23.946713 run osmo-hlr_10.42.42.2(pid=25236): stderr: | �[0;m�[1;31m20221209043120642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209043120642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209043120642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209043120642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209043120642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209043120642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209043120654 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209043120663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209043120663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209043120663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:31:23.992044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25229): Terminating (SIGTERM) 04:31:24.034288 run iperf3-srv_10.42.42.10(pid=25230): Terminating (SIGTERM) 04:31:24.076693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25231): Terminating (SIGTERM) 04:31:24.118970 run iperf3-srv_10.42.42.10(pid=25232): Terminating (SIGTERM) 04:31:24.161503 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25235): Terminating (SIGTERM) 04:31:24.204016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25238): Terminating (SIGTERM) 04:31:24.246472 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25241): Terminating (SIGTERM) 04:31:24.256324 --- ParallelTerminationStrategy: PID 25229 died... 04:31:24.313673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25229): Terminated: ok {rc=0} 04:31:24.324145 --- ParallelTerminationStrategy: PID 25230 died... 04:31:24.380766 run iperf3-srv_10.42.42.10(pid=25230): Terminated {rc=256} 04:31:24.391100 --- ParallelTerminationStrategy: PID 25231 died... 04:31:24.447681 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25231): Terminated: ok {rc=0} 04:31:24.458120 --- ParallelTerminationStrategy: PID 25232 died... 04:31:24.514292 run iperf3-srv_10.42.42.10(pid=25232): Terminated {rc=256} 04:31:24.524531 --- ParallelTerminationStrategy: PID 25235 died... 04:31:24.580637 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25235): Terminated: ok {rc=0} 04:31:24.590996 --- ParallelTerminationStrategy: PID 25238 died... 04:31:24.647531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25238): Terminated: ok {rc=0} 04:31:24.657959 --- ParallelTerminationStrategy: PID 25241 died... 04:31:24.714314 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25241): Terminated: ok {rc=0} 04:31:24.801734 bus /gobi_0: Setting Powered False 04:31:25.909479 bus /gobi_0: Setting Powered False 04:31:27.015606 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25239): Process ended prematurely: osmo-stp_10.42.42.5(pid=25239) [trial-2354↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25239)]