Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22365): Process ended prematurely: osmo-stp_10.42.42.5(pid=22365) [trial-2354↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22365)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 04:09:19.302781 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.313685 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:09:19.471590 tst cs_paging_gprs_active.py: using LAC 18968 04:09:19.594854 tst cs_paging_gprs_active.py: using RAC 98 04:09:19.714484 tst cs_paging_gprs_active.py: using CellId 18968 04:09:19.840250 tst cs_paging_gprs_active.py: using BVCI 18969 04:09:19.865427 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.876901 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.888430 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.900695 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.912871 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.924931 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.937166 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.949095 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:19.961480 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:09:20.083009 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:09:20.378510 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:09:20.514234 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:09:20.848795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22355): Launched 04:09:21.128251 run iperf3-srv_10.42.42.10(pid=22356): Launched 04:09:21.327212 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:09:21.462803 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:09:21.797805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22357): Launched 04:09:22.076001 run iperf3-srv_10.42.42.10(pid=22358): Launched 04:09:22.274020 tst cs_paging_gprs_active.py:38: start network... 04:09:22.409792 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:09:22.919141 run create_hlr_db(pid=22359): Launched 04:09:23.106226 bus /gobi_6: Setting Powered False 04:09:24.122130 run create_hlr_db(pid=22359): Terminated: ok {rc=0} 04:09:24.527968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22361): Launched 04:09:24.830147 run osmo-hlr_10.42.42.2(pid=22362): Launched 04:09:24.941250 run osmo-stp_10.42.42.5: Starting osmo-stp 04:09:25.463302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22364): Launched 04:09:25.764578 run osmo-stp_10.42.42.5(pid=22365): Launched 04:09:25.876301 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:09:26.399916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22367): Launched 04:09:26.506749 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:09:26.768827 run patchelf(pid=22368): Launched 04:09:26.945304 run osmo-stp_10.42.42.5(pid=22365): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22365)] 04:09:27.073826 run osmo-stp_10.42.42.5(pid=22365): stdout: | (launched: 2022-12-09_04:09:25.616294) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:09:27.203284 run osmo-stp_10.42.42.5(pid=22365): stderr: | �[0;m�[38;5;43m20221209040925783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209040925783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209040925783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209040925784 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209040925784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209040925784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209040925784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:09:27.327627 run osmo-stp_10.42.42.5(pid=22365): stdout: | (launched: 2022-12-09_04:09:25.616294) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:09:27.451077 run osmo-stp_10.42.42.5(pid=22365): stderr: | �[0;m�[38;5;43m20221209040925783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209040925783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209040925783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209040925784 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209040925784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209040925784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209040925784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:09:27.595271 run patchelf(pid=22368): Terminating (SIGINT) 04:09:27.764626 run patchelf(pid=22368): Terminated: ok {rc=0} 04:09:27.795923 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22365): Process ended prematurely: osmo-stp_10.42.42.5(pid=22365) [trial-2354↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22365)] [trial-2354↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 04:09:27.805601 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 04:09:27.866343 run osmo-hlr_10.42.42.2(pid=22362): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22362)] 04:09:27.915766 run osmo-hlr_10.42.42.2(pid=22362): stdout: | (launched: 2022-12-09_04:09:24.681550) 04:09:27.965622 run osmo-hlr_10.42.42.2(pid=22362): stderr: | �[0;m�[1;31m20221209040924858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209040924858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209040924858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209040924858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209040924858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209040924858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209040924874 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209040924884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209040924884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209040924884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:09:28.007978 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22355): Terminating (SIGTERM) 04:09:28.047763 run iperf3-srv_10.42.42.10(pid=22356): Terminating (SIGTERM) 04:09:28.087583 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22357): Terminating (SIGTERM) 04:09:28.127346 run iperf3-srv_10.42.42.10(pid=22358): Terminating (SIGTERM) 04:09:28.166993 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22361): Terminating (SIGTERM) 04:09:28.206680 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22364): Terminating (SIGTERM) 04:09:28.246477 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22367): Terminating (SIGTERM) 04:09:28.255573 --- ParallelTerminationStrategy: PID 22355 died... 04:09:28.308696 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22355): Terminated: ok {rc=0} 04:09:28.318228 --- ParallelTerminationStrategy: PID 22356 died... 04:09:28.371121 run iperf3-srv_10.42.42.10(pid=22356): Terminated {rc=256} 04:09:28.380619 --- ParallelTerminationStrategy: PID 22357 died... 04:09:28.433482 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22357): Terminated: ok {rc=0} 04:09:28.442960 --- ParallelTerminationStrategy: PID 22358 died... 04:09:28.495664 run iperf3-srv_10.42.42.10(pid=22358): Terminated {rc=256} 04:09:28.505145 --- ParallelTerminationStrategy: PID 22361 died... 04:09:28.558382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22361): Terminated: ok {rc=0} 04:09:28.567908 --- ParallelTerminationStrategy: PID 22364 died... 04:09:28.620826 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22364): Terminated: ok {rc=0} 04:09:28.630358 --- ParallelTerminationStrategy: PID 22367 died... 04:09:28.683157 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22367): Terminated: ok {rc=0} 04:09:28.766721 bus /gobi_0: Setting Powered False 04:09:29.874685 bus /gobi_0: Setting Powered False 04:09:30.987879 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22365): Process ended prematurely: osmo-stp_10.42.42.5(pid=22365) [trial-2354↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22365)]