Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=26011): Process ended prematurely: osmo-stp_10.42.42.5(pid=26011) [trial-2354↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26011)]
Standard Output
---------------------------------------------- trial-2354 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 04:38:21.801632 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:21.813221 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 04:38:21.940933 tst cs_paging_gprs_active.py: using LAC 19124 04:38:22.065661 tst cs_paging_gprs_active.py: using RAC 254 04:38:22.191492 tst cs_paging_gprs_active.py: using CellId 19124 04:38:22.314115 tst cs_paging_gprs_active.py: using BVCI 19125 04:38:22.339158 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.351054 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.362838 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.374131 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.386584 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.399251 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.411741 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.423596 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:22.437065 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 04:38:22.556567 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 04:38:22.844305 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:38:22.981930 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:38:23.315050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26001): Launched 04:38:23.591713 run iperf3-srv_10.42.42.10(pid=26002): Launched 04:38:23.788926 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:38:23.923406 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:38:24.256298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26003): Launched 04:38:24.532848 run iperf3-srv_10.42.42.10(pid=26004): Launched 04:38:24.729682 tst cs_paging_gprs_active.py:38: start network... 04:38:24.864033 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:38:25.369276 run create_hlr_db(pid=26005): Launched 04:38:25.554481 bus /sierra_2: Setting Powered False 04:38:26.576341 run create_hlr_db(pid=26005): Terminated: ok {rc=0} 04:38:26.978865 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26007): Launched 04:38:27.279427 run osmo-hlr_10.42.42.2(pid=26008): Launched 04:38:27.391446 run osmo-stp_10.42.42.5: Starting osmo-stp 04:38:27.914545 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26010): Launched 04:38:28.215961 run osmo-stp_10.42.42.5(pid=26011): Launched 04:38:28.324921 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:38:28.847139 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26013): Launched 04:38:28.954243 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:38:29.216841 run patchelf(pid=26014): Launched 04:38:29.392845 run osmo-stp_10.42.42.5(pid=26011): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26011)] 04:38:29.521641 run osmo-stp_10.42.42.5(pid=26011): stdout: | (launched: 2022-12-09_04:38:28.067083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:38:29.650301 run osmo-stp_10.42.42.5(pid=26011): stderr: | �[0;m�[38;5;43m20221209043828238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043828239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043828239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043828239 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043828240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043828240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043828240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:38:29.775645 run osmo-stp_10.42.42.5(pid=26011): stdout: | (launched: 2022-12-09_04:38:28.067083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:38:29.899482 run osmo-stp_10.42.42.5(pid=26011): stderr: | �[0;m�[38;5;43m20221209043828238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043828239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043828239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043828239 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043828240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043828240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043828240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:38:30.043891 run patchelf(pid=26014): Terminating (SIGINT) 04:38:30.214125 run patchelf(pid=26014): Terminated: ok {rc=0} 04:38:30.245577 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26011): Process ended prematurely: osmo-stp_10.42.42.5(pid=26011) [trial-2354↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26011)] [trial-2354↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 04:38:30.255032 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 04:38:30.315837 run osmo-hlr_10.42.42.2(pid=26008): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26008)] 04:38:30.365110 run osmo-hlr_10.42.42.2(pid=26008): stdout: | (launched: 2022-12-09_04:38:27.131092) 04:38:30.415544 run osmo-hlr_10.42.42.2(pid=26008): stderr: | �[0;m�[1;31m20221209043827308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209043827308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209043827308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209043827308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209043827308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209043827308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209043827320 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209043827329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209043827329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209043827329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:38:30.457902 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26001): Terminating (SIGTERM) 04:38:30.497761 run iperf3-srv_10.42.42.10(pid=26002): Terminating (SIGTERM) 04:38:30.537728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26003): Terminating (SIGTERM) 04:38:30.577585 run iperf3-srv_10.42.42.10(pid=26004): Terminating (SIGTERM) 04:38:30.617496 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26007): Terminating (SIGTERM) 04:38:30.657174 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26010): Terminating (SIGTERM) 04:38:30.697062 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26013): Terminating (SIGTERM) 04:38:30.706467 --- ParallelTerminationStrategy: PID 26001 died... 04:38:30.759747 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26001): Terminated: ok {rc=0} 04:38:30.769774 --- ParallelTerminationStrategy: PID 26002 died... 04:38:30.822688 run iperf3-srv_10.42.42.10(pid=26002): Terminated {rc=256} 04:38:30.832713 --- ParallelTerminationStrategy: PID 26003 died... 04:38:30.887094 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26003): Terminated: ok {rc=0} 04:38:30.897284 --- ParallelTerminationStrategy: PID 26004 died... 04:38:30.965151 run iperf3-srv_10.42.42.10(pid=26004): Terminated {rc=256} 04:38:30.975311 --- ParallelTerminationStrategy: PID 26007 died... 04:38:31.033567 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26007): Terminated: ok {rc=0} 04:38:31.049587 --- ParallelTerminationStrategy: PID 26010 died... 04:38:31.116057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26010): Terminated: ok {rc=0} 04:38:31.127034 --- ParallelTerminationStrategy: PID 26013 died... 04:38:31.188549 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26013): Terminated: ok {rc=0} 04:38:31.296115 bus /gobi_0: Setting Powered False 04:38:32.403126 bus /gobi_0: Setting Powered False 04:38:33.514595 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26011): Process ended prematurely: osmo-stp_10.42.42.5(pid=26011) [trial-2354↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26011)]