Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=26665): Process ended prematurely: osmo-stp_10.42.42.5(pid=26665) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26665)]
Standard Output
---------------------------------------------- trial-2354 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 04:47:43.362962 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.374838 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:47:43.510846 tst iperf3.py: using LAC 19173 04:47:43.628007 tst iperf3.py: using RAC 48 04:47:43.744016 tst iperf3.py: using CellId 19173 04:47:43.861928 tst iperf3.py: using BVCI 19174 04:47:43.884494 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.895647 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.906692 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.917789 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.928689 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.939706 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.950849 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.961844 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.972885 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:44.244616 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:47:44.367097 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:44.672027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26657): Launched 04:47:44.925227 run iperf3-srv_10.42.42.10(pid=26658): Launched 04:47:45.103067 tst iperf3.py:8: start network... 04:47:45.225111 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:47:45.697717 run create_hlr_db(pid=26659): Launched 04:47:45.868708 bus /gobi_6: Setting Powered False 04:47:46.890809 run create_hlr_db(pid=26659): Terminated: ok {rc=0} 04:47:47.305150 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26661): Launched 04:47:47.601063 run osmo-hlr_10.42.42.2(pid=26662): Launched 04:47:47.708907 run osmo-stp_10.42.42.5: Starting osmo-stp 04:47:48.221768 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26664): Launched 04:47:48.517895 run osmo-stp_10.42.42.5(pid=26665): Launched 04:47:48.625279 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:47:49.138890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26667): Launched 04:47:49.243976 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:47:49.501268 run patchelf(pid=26668): Launched 04:47:49.674281 run osmo-stp_10.42.42.5(pid=26665): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26665)] 04:47:49.801154 run osmo-stp_10.42.42.5(pid=26665): stdout: | (launched: 2022-12-09_04:47:48.371825) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:49.928386 run osmo-stp_10.42.42.5(pid=26665): stderr: | �[0;m�[38;5;43m20221209044748542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044748543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044748543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044748543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044748544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044748544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044748544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:50.051016 run osmo-stp_10.42.42.5(pid=26665): stdout: | (launched: 2022-12-09_04:47:48.371825) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:50.173376 run osmo-stp_10.42.42.5(pid=26665): stderr: | �[0;m�[38;5;43m20221209044748542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044748543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044748543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044748543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044748544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044748544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044748544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:50.315168 run patchelf(pid=26668): Terminating (SIGINT) 04:47:50.482510 run patchelf(pid=26668): Terminated: ok {rc=0} 04:47:50.513266 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26665): Process ended prematurely: osmo-stp_10.42.42.5(pid=26665) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26665)] [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 04:47:50.522427 tst iperf3.py:8: Test FAILED (7.2 sec) 04:47:50.582215 run osmo-hlr_10.42.42.2(pid=26662): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26662)] 04:47:50.631297 run osmo-hlr_10.42.42.2(pid=26662): stdout: | (launched: 2022-12-09_04:47:47.455046) 04:47:50.681244 run osmo-hlr_10.42.42.2(pid=26662): stderr: | �[0;m�[1;31m20221209044747628 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209044747628 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209044747628 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209044747629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209044747629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209044747629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209044747644 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209044747654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209044747654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209044747654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:47:50.723233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26657): Terminating (SIGTERM) 04:47:50.762571 run iperf3-srv_10.42.42.10(pid=26658): Terminating (SIGTERM) 04:47:50.801872 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26661): Terminating (SIGTERM) 04:47:50.841164 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26664): Terminating (SIGTERM) 04:47:50.880439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26667): Terminating (SIGTERM) 04:47:50.889477 --- ParallelTerminationStrategy: PID 26657 died... 04:47:50.942120 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26657): Terminated: ok {rc=0} 04:47:50.951526 --- ParallelTerminationStrategy: PID 26658 died... 04:47:51.003969 run iperf3-srv_10.42.42.10(pid=26658): Terminated {rc=256} 04:47:51.013429 --- ParallelTerminationStrategy: PID 26661 died... 04:47:51.066036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26661): Terminated: ok {rc=0} 04:47:51.075481 --- ParallelTerminationStrategy: PID 26664 died... 04:47:51.128395 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26664): Terminated: ok {rc=0} 04:47:51.137848 --- ParallelTerminationStrategy: PID 26667 died... 04:47:51.190551 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26667): Terminated: ok {rc=0} 04:47:51.278746 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26665): Process ended prematurely: osmo-stp_10.42.42.5(pid=26665) [trial-2354↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26665)]