Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=2025): Process ended prematurely: osmo-stp_10.42.42.5(pid=2025) [trial-2355↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2025)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 06:24:30.549720 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:30.561306 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 06:24:30.701392 tst iperf3.py: using LAC 19548 06:24:30.819060 tst iperf3.py: using RAC 168 06:24:30.956522 tst iperf3.py: using CellId 19548 06:24:31.089613 tst iperf3.py: using BVCI 19549 06:24:31.116189 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.128578 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.140742 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.152576 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.165181 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.177337 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.189538 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.201252 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:24:31.212933 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 06:24:31.520591 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:24:31.663491 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:24:32.024781 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2017): Launched 06:24:32.311569 run iperf3-srv_10.42.42.10(pid=2018): Launched 06:24:32.511656 tst iperf3.py:8: start network... 06:24:32.648297 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:24:33.172370 run create_hlr_db(pid=2019): Launched 06:24:33.360999 bus /gobi_6: Setting Powered False 06:24:34.381307 run create_hlr_db(pid=2019): Terminated: ok {rc=0} 06:24:34.816209 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2021): Launched 06:24:35.142816 run osmo-hlr_10.42.42.2(pid=2022): Launched 06:24:35.261981 run osmo-stp_10.42.42.5: Starting osmo-stp 06:24:35.832062 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2024): Launched 06:24:36.159796 run osmo-stp_10.42.42.5(pid=2025): Launched 06:24:36.282876 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:24:36.852850 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2027): Launched 06:24:36.969380 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:24:37.254331 run patchelf(pid=2028): Launched 06:24:37.445974 run osmo-stp_10.42.42.5(pid=2025): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2025)] 06:24:37.585338 run osmo-stp_10.42.42.5(pid=2025): stdout: | (launched: 2022-12-09_06:24:35.998795) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:24:37.725804 run osmo-stp_10.42.42.5(pid=2025): stderr: | �[0;m�[38;5;43m20221209062436194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062436194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062436194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062436195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062436195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062436195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062436195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:24:37.861979 run osmo-stp_10.42.42.5(pid=2025): stdout: | (launched: 2022-12-09_06:24:35.998795) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:24:37.996825 run osmo-stp_10.42.42.5(pid=2025): stderr: | �[0;m�[38;5;43m20221209062436194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062436194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062436194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062436195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062436195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062436195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062436195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:24:38.153300 run patchelf(pid=2028): Terminating (SIGINT) 06:24:38.338065 run patchelf(pid=2028): Terminated: ok {rc=0} 06:24:38.371573 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2025): Process ended prematurely: osmo-stp_10.42.42.5(pid=2025) [trial-2355↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2025)] [trial-2355↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 06:24:38.381450 tst iperf3.py:8: Test FAILED (7.9 sec) 06:24:38.444208 run osmo-hlr_10.42.42.2(pid=2022): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2022)] 06:24:38.495486 run osmo-hlr_10.42.42.2(pid=2022): stdout: | (launched: 2022-12-09_06:24:34.982504) 06:24:38.547337 run osmo-hlr_10.42.42.2(pid=2022): stderr: | �[0;m�[1;31m20221209062435184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209062435184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209062435184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209062435184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209062435184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209062435185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209062435196 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209062435205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209062435205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209062435205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:24:38.591868 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2017): Terminating (SIGTERM) 06:24:38.633810 run iperf3-srv_10.42.42.10(pid=2018): Terminating (SIGTERM) 06:24:38.675872 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2021): Terminating (SIGTERM) 06:24:38.718382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2024): Terminating (SIGTERM) 06:24:38.760268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2027): Terminating (SIGTERM) 06:24:38.770134 --- ParallelTerminationStrategy: PID 2017 died... 06:24:38.826121 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2017): Terminated: ok {rc=0} 06:24:38.836366 --- ParallelTerminationStrategy: PID 2018 died... 06:24:38.892199 run iperf3-srv_10.42.42.10(pid=2018): Terminated {rc=256} 06:24:38.902391 --- ParallelTerminationStrategy: PID 2021 died... 06:24:38.958231 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2021): Terminated: ok {rc=0} 06:24:38.968565 --- ParallelTerminationStrategy: PID 2024 died... 06:24:39.024488 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2024): Terminated: ok {rc=0} 06:24:39.034703 --- ParallelTerminationStrategy: PID 2027 died... 06:24:39.090397 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2027): Terminated: ok {rc=0} 06:24:39.178046 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2025): Process ended prematurely: osmo-stp_10.42.42.5(pid=2025) [trial-2355↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2025)]