Failed
gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=2056): Process ended prematurely: osmo-stp_10.42.42.5(pid=2056) [trial-2355↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2056)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-lms-limenet-micro ping.py ---------------------------------------------- 06:25:00.210459 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.222282 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 06:25:00.360649 tst ping.py: using LAC 19550 06:25:00.489821 tst ping.py: using RAC 170 06:25:00.612149 tst ping.py: using CellId 19550 06:25:00.734809 tst ping.py: using BVCI 19551 06:25:00.759176 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.770368 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.781419 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.792465 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.803443 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.814359 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.825551 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:00.848909 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 06:25:01.214319 tst ping.py:19: start network... 06:25:01.386172 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:25:01.925342 run create_hlr_db(pid=2050): Launched 06:25:02.113974 bus /gobi_6: Setting Powered False 06:25:03.130465 run create_hlr_db(pid=2050): Terminated: ok {rc=0} 06:25:03.552903 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2052): Launched 06:25:03.868719 run osmo-hlr_10.42.42.2(pid=2053): Launched 06:25:03.988041 run osmo-stp_10.42.42.5: Starting osmo-stp 06:25:04.539146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2055): Launched 06:25:04.853825 run osmo-stp_10.42.42.5(pid=2056): Launched 06:25:04.966640 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:25:05.514802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2058): Launched 06:25:05.626786 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:25:05.902427 run patchelf(pid=2059): Launched 06:25:06.087649 run osmo-stp_10.42.42.5(pid=2056): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2056)] 06:25:06.223097 run osmo-stp_10.42.42.5(pid=2056): stdout: | (launched: 2022-12-09_06:25:04.699942) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:25:06.358728 run osmo-stp_10.42.42.5(pid=2056): stderr: | �[0;m�[38;5;43m20221209062504895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062504895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062504895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062504896 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062504896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062504896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062504896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:25:06.489939 run osmo-stp_10.42.42.5(pid=2056): stdout: | (launched: 2022-12-09_06:25:04.699942) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:25:06.619406 run osmo-stp_10.42.42.5(pid=2056): stderr: | �[0;m�[38;5;43m20221209062504895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062504895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062504895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062504896 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062504896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062504896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062504896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:25:06.770779 run patchelf(pid=2059): Terminating (SIGINT) 06:25:06.947915 run patchelf(pid=2059): Terminated: ok {rc=0} 06:25:06.979992 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=2056): Process ended prematurely: osmo-stp_10.42.42.5(pid=2056) [trial-2355↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2056)] [trial-2355↪gprs:trx-lms-limenet-micro↪ping.py:22] 06:25:06.989095 tst ping.py:22: Test FAILED (6.8 sec) 06:25:07.051766 run osmo-hlr_10.42.42.2(pid=2053): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2053)] 06:25:07.103315 run osmo-hlr_10.42.42.2(pid=2053): stdout: | (launched: 2022-12-09_06:25:03.714215) 06:25:07.155889 run osmo-hlr_10.42.42.2(pid=2053): stderr: | �[0;m�[1;31m20221209062503913 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209062503913 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209062503913 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209062503913 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209062503913 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209062503913 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209062503926 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209062503936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209062503936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209062503936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:25:07.200330 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2052): Terminating (SIGTERM) 06:25:07.242556 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2055): Terminating (SIGTERM) 06:25:07.284517 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2058): Terminating (SIGTERM) 06:25:07.294269 --- ParallelTerminationStrategy: PID 2052 died... 06:25:07.350355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2052): Terminated: ok {rc=0} 06:25:07.360351 --- ParallelTerminationStrategy: PID 2055 died... 06:25:07.416024 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2055): Terminated: ok {rc=0} 06:25:07.426146 --- ParallelTerminationStrategy: PID 2058 died... 06:25:07.481739 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2058): Terminated: ok {rc=0} 06:25:07.568641 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2056): Process ended prematurely: osmo-stp_10.42.42.5(pid=2056) [trial-2355↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2056)]