Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=663): Process ended prematurely: osmo-stp_10.42.42.5(pid=663) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=663)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 06:09:41.607914 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:41.619121 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:09:41.775165 tst cs_paging_gprs_active.py: using LAC 19468 06:09:41.902476 tst cs_paging_gprs_active.py: using RAC 88 06:09:42.029622 tst cs_paging_gprs_active.py: using CellId 19468 06:09:42.159564 tst cs_paging_gprs_active.py: using BVCI 19469 06:09:42.185055 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.196526 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.207929 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.219519 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.230783 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.242022 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.253303 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.264503 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:42.275901 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:09:42.392126 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:09:42.676499 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:09:42.803999 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:09:43.121933 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=653): Launched 06:09:43.386292 run iperf3-srv_10.42.42.10(pid=654): Launched 06:09:43.571512 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:09:43.698203 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:09:44.014252 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=655): Launched 06:09:44.278243 run iperf3-srv_10.42.42.10(pid=656): Launched 06:09:44.464483 tst cs_paging_gprs_active.py:38: start network... 06:09:44.591624 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:09:45.075795 run create_hlr_db(pid=657): Launched 06:09:45.251949 bus /gobi_6: Setting Powered False 06:09:46.306233 run create_hlr_db(pid=657): Terminated: ok {rc=0} 06:09:46.770959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=659): Launched 06:09:47.165389 run osmo-hlr_10.42.42.2(pid=660): Launched 06:09:47.277540 run osmo-stp_10.42.42.5: Starting osmo-stp 06:09:47.809787 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=662): Launched 06:09:48.115027 run osmo-stp_10.42.42.5(pid=663): Launched 06:09:48.226584 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:09:48.761172 run pcap-recorder_any(filters='host 10.42.42.6')(pid=665): Launched 06:09:48.869718 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:09:49.144283 run patchelf(pid=666): Launched 06:09:49.324243 run osmo-stp_10.42.42.5(pid=663): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=663)] 06:09:49.455377 run osmo-stp_10.42.42.5(pid=663): stdout: | (launched: 2022-12-09_06:09:47.964562) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:09:49.587122 run osmo-stp_10.42.42.5(pid=663): stderr: | �[0;m�[38;5;43m20221209060948138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209060948138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209060948139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209060948139 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209060948140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209060948140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209060948140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:09:49.714233 run osmo-stp_10.42.42.5(pid=663): stdout: | (launched: 2022-12-09_06:09:47.964562) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:09:49.840090 run osmo-stp_10.42.42.5(pid=663): stderr: | �[0;m�[38;5;43m20221209060948138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209060948138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209060948139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209060948139 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209060948140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209060948140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209060948140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:09:49.986694 run patchelf(pid=666): Terminating (SIGINT) 06:09:50.159560 run patchelf(pid=666): Terminated: ok {rc=0} 06:09:50.191217 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=663): Process ended prematurely: osmo-stp_10.42.42.5(pid=663) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=663)] [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 06:09:50.200517 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 06:09:50.262292 run osmo-hlr_10.42.42.2(pid=660): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=660)] 06:09:50.311807 run osmo-hlr_10.42.42.2(pid=660): stdout: | (launched: 2022-12-09_06:09:46.945088) 06:09:50.362252 run osmo-hlr_10.42.42.2(pid=660): stderr: | �[0;m�[1;31m20221209060947191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209060947191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209060947191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209060947191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209060947191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209060947191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209060947203 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209060947212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209060947212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209060947212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:09:50.404699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=653): Terminating (SIGTERM) 06:09:50.445857 run iperf3-srv_10.42.42.10(pid=654): Terminating (SIGTERM) 06:09:50.486494 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=655): Terminating (SIGTERM) 06:09:50.526912 run iperf3-srv_10.42.42.10(pid=656): Terminating (SIGTERM) 06:09:50.567144 run pcap-recorder_any(filters='host 10.42.42.2')(pid=659): Terminating (SIGTERM) 06:09:50.607370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=662): Terminating (SIGTERM) 06:09:50.647542 run pcap-recorder_any(filters='host 10.42.42.6')(pid=665): Terminating (SIGTERM) 06:09:50.657176 --- ParallelTerminationStrategy: PID 653 died... 06:09:50.711095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=653): Terminated: ok {rc=0} 06:09:50.720818 --- ParallelTerminationStrategy: PID 654 died... 06:09:50.774061 run iperf3-srv_10.42.42.10(pid=654): Terminated {rc=256} 06:09:50.783973 --- ParallelTerminationStrategy: PID 655 died... 06:09:50.837633 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=655): Terminated: ok {rc=0} 06:09:50.847302 --- ParallelTerminationStrategy: PID 656 died... 06:09:50.900327 run iperf3-srv_10.42.42.10(pid=656): Terminated {rc=256} 06:09:50.910237 --- ParallelTerminationStrategy: PID 659 died... 06:09:50.963950 run pcap-recorder_any(filters='host 10.42.42.2')(pid=659): Terminated: ok {rc=0} 06:09:50.973789 --- ParallelTerminationStrategy: PID 662 died... 06:09:51.027233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=662): Terminated: ok {rc=0} 06:09:51.037252 --- ParallelTerminationStrategy: PID 665 died... 06:09:51.090665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=665): Terminated: ok {rc=0} 06:09:51.179855 bus /gobi_0: Setting Powered False 06:09:52.283931 bus /gobi_0: Setting Powered False 06:09:53.394076 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=663): Process ended prematurely: osmo-stp_10.42.42.5(pid=663) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=663)]