Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5890): Process ended prematurely: osmo-stp_10.42.42.5(pid=5890) [trial-2356↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5890)]
Standard Output
---------------------------------------------- trial-2356 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 07:11:08.360184 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:08.371704 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:11:08.526124 tst cs_paging_gprs_active.py: using LAC 19792 07:11:08.653683 tst cs_paging_gprs_active.py: using RAC 157 07:11:08.784185 tst cs_paging_gprs_active.py: using CellId 19792 07:11:08.914148 tst cs_paging_gprs_active.py: using BVCI 19793 07:11:08.939450 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:08.950861 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:08.962063 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:08.973312 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:08.984341 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:08.995547 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:09.006849 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:09.017926 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:11:09.029399 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:11:09.151906 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:11:09.435126 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:11:09.564089 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:11:09.883274 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5880): Launched 07:11:10.151238 run iperf3-srv_10.42.42.10(pid=5881): Launched 07:11:10.339310 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:11:10.468348 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:11:10.800770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5882): Launched 07:11:11.084930 run iperf3-srv_10.42.42.10(pid=5883): Launched 07:11:11.286918 tst cs_paging_gprs_active.py:38: start network... 07:11:11.424464 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:11:11.951754 run create_hlr_db(pid=5884): Launched 07:11:12.142970 bus /gobi_6: Setting Powered False 07:11:13.163694 run create_hlr_db(pid=5884): Terminated: ok {rc=0} 07:11:13.576061 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5886): Launched 07:11:13.884099 run osmo-hlr_10.42.42.2(pid=5887): Launched 07:11:14.000226 run osmo-stp_10.42.42.5: Starting osmo-stp 07:11:14.536281 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5889): Launched 07:11:14.848335 run osmo-stp_10.42.42.5(pid=5890): Launched 07:11:14.961235 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:11:15.498810 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5892): Launched 07:11:15.609305 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:11:15.905181 run patchelf(pid=5893): Launched 07:11:16.094348 run osmo-stp_10.42.42.5(pid=5890): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5890)] 07:11:16.230361 run osmo-stp_10.42.42.5(pid=5890): stdout: | (launched: 2022-12-09_07:11:14.693308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:11:16.366613 run osmo-stp_10.42.42.5(pid=5890): stderr: | �[0;m�[38;5;43m20221209071114861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071114861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071114862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071114862 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071114863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071114863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071114863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:11:16.498577 run osmo-stp_10.42.42.5(pid=5890): stdout: | (launched: 2022-12-09_07:11:14.693308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:11:16.629258 run osmo-stp_10.42.42.5(pid=5890): stderr: | �[0;m�[38;5;43m20221209071114861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071114861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071114862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071114862 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071114863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071114863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071114863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:11:16.780589 run patchelf(pid=5893): Terminating (SIGINT) 07:11:16.957794 run patchelf(pid=5893): Terminated: ok {rc=0} 07:11:16.991094 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5890): Process ended prematurely: osmo-stp_10.42.42.5(pid=5890) [trial-2356↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5890)] [trial-2356↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 07:11:17.001549 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 07:11:17.067023 run osmo-hlr_10.42.42.2(pid=5887): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5887)] 07:11:17.119133 run osmo-hlr_10.42.42.2(pid=5887): stdout: | (launched: 2022-12-09_07:11:13.732710) 07:11:17.172096 run osmo-hlr_10.42.42.2(pid=5887): stderr: | �[0;m�[1;31m20221209071113906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209071113906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209071113906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209071113906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209071113906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209071113906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209071113919 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209071113930 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209071113931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209071113931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:11:17.216027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5880): Terminating (SIGTERM) 07:11:17.258513 run iperf3-srv_10.42.42.10(pid=5881): Terminating (SIGTERM) 07:11:17.301048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5882): Terminating (SIGTERM) 07:11:17.341824 run iperf3-srv_10.42.42.10(pid=5883): Terminating (SIGTERM) 07:11:17.381922 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5886): Terminating (SIGTERM) 07:11:17.422211 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5889): Terminating (SIGTERM) 07:11:17.462372 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5892): Terminating (SIGTERM) 07:11:17.471836 --- ParallelTerminationStrategy: PID 5880 died... 07:11:17.525459 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5880): Terminated: ok {rc=0} 07:11:17.535117 --- ParallelTerminationStrategy: PID 5881 died... 07:11:17.588396 run iperf3-srv_10.42.42.10(pid=5881): Terminated {rc=256} 07:11:17.597913 --- ParallelTerminationStrategy: PID 5882 died... 07:11:17.651403 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5882): Terminated: ok {rc=0} 07:11:17.660871 --- ParallelTerminationStrategy: PID 5883 died... 07:11:17.714232 run iperf3-srv_10.42.42.10(pid=5883): Terminated {rc=256} 07:11:17.723797 --- ParallelTerminationStrategy: PID 5886 died... 07:11:17.777005 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5886): Terminated: ok {rc=0} 07:11:17.786811 --- ParallelTerminationStrategy: PID 5889 died... 07:11:17.840160 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5889): Terminated: ok {rc=0} 07:11:17.849788 --- ParallelTerminationStrategy: PID 5892 died... 07:11:17.903304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5892): Terminated: ok {rc=0} 07:11:17.993663 bus /gobi_0: Setting Powered False 07:11:19.098014 bus /gobi_0: Setting Powered False 07:11:20.209619 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5890): Process ended prematurely: osmo-stp_10.42.42.5(pid=5890) [trial-2356↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5890)]