Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-umtrx.ping.py (from gprs_trx-umtrx)

Failing for the past 158 builds (Since #2200 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=18065): Process ended prematurely: osmo-stp_10.42.42.5(pid=18065) [trial-2357↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18065)]

Standard Output

----------------------------------------------
trial-2357 gprs:trx-umtrx ping.py
----------------------------------------------
09:03:15.621361 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:15.633447 tst                   gprs:trx-umtrx: Using 1 x bts (candidates: 1)
09:03:15.779475 tst                          ping.py: using LAC 20383
09:03:15.925973 tst                          ping.py: using RAC 238
09:03:16.062755 tst                          ping.py: using CellId 20383
09:03:16.221598 tst                          ping.py: using BVCI 20384
09:03:16.256210 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:16.271545 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:16.284321 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:16.302263 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:16.319865 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:16.337486 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:16.353864 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
09:03:16.371100 tst                   gprs:trx-umtrx: Using 1 x modem (candidates: 4)
09:03:16.715608 tst                       ping.py:19: start network...
09:03:16.847795 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:03:17.352787 run         create_hlr_db(pid=18059): Launched
09:03:17.542238 bus                          /gobi_6: Setting Powered False
09:03:18.562019 run         create_hlr_db(pid=18059): Terminated: ok {rc=0}
09:03:18.992709 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18061): Launched
09:03:19.319278 run   osmo-hlr_10.42.42.2(pid=18062): Launched
09:03:19.437338 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:03:20.003958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18064): Launched
09:03:20.331128 run   osmo-stp_10.42.42.5(pid=18065): Launched
09:03:20.454596 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:03:21.023688 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18067): Launched
09:03:21.140504 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:03:21.426556 run              patchelf(pid=18068): Launched
09:03:21.617606 run   osmo-stp_10.42.42.5(pid=18065): ERR: Terminated: ERROR {rc=1}  [trial-2357↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18065)]
09:03:21.756773 run   osmo-stp_10.42.42.5(pid=18065): stdout: 
| (launched: 2022-12-09_09:03:20.169433)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:03:21.896499 run   osmo-stp_10.42.42.5(pid=18065): stderr: 
| �[0;m�[38;5;43m20221209090320358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209090320358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209090320358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209090320358 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209090320359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209090320359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209090320359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:03:22.031530 run   osmo-stp_10.42.42.5(pid=18065): stdout: 
| (launched: 2022-12-09_09:03:20.169433)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:03:22.165375 run   osmo-stp_10.42.42.5(pid=18065): stderr: 
| �[0;m�[38;5;43m20221209090320358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209090320358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209090320358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209090320358 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209090320359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209090320359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209090320359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:03:22.320567 run              patchelf(pid=18068): Terminating (SIGINT)
09:03:22.503893 run              patchelf(pid=18068): Terminated: ok {rc=0}
09:03:22.536853 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18065): Process ended prematurely: osmo-stp_10.42.42.5(pid=18065) [trial-2357↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18065)]  [trial-2357↪gprs:trx-umtrx↪ping.py:22]
09:03:22.546182 tst                       ping.py:22: Test FAILED (6.9 sec)
09:03:22.610282 run   osmo-hlr_10.42.42.2(pid=18062): ERR: Terminated: ERROR {rc=237}  [trial-2357↪gprs:trx-umtrx↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18062)]
09:03:22.662216 run   osmo-hlr_10.42.42.2(pid=18062): stdout: 
| (launched: 2022-12-09_09:03:19.158006) 
09:03:22.714936 run   osmo-hlr_10.42.42.2(pid=18062): stderr: 
| �[0;m�[1;31m20221209090319354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209090319354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209090319354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209090319354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209090319354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209090319355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209090319381 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-umtrx/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209090319390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209090319391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209090319391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:03:22.759722 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18061): Terminating (SIGTERM)
09:03:22.803080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18064): Terminating (SIGTERM)
09:03:22.845749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18067): Terminating (SIGTERM)
09:03:22.855898 ---      ParallelTerminationStrategy: PID 18061 died...
09:03:22.913150 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18061): Terminated: ok {rc=0}
09:03:22.923600 ---      ParallelTerminationStrategy: PID 18064 died...
09:03:22.980127 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18064): Terminated: ok {rc=0}
09:03:22.990749 ---      ParallelTerminationStrategy: PID 18067 died...
09:03:23.047192 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18067): Terminated: ok {rc=0}
09:03:23.134637 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18065): Process ended prematurely: osmo-stp_10.42.42.5(pid=18065) [trial-2357↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18065)]