Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=28848): Process ended prematurely: osmo-stp_10.42.42.5(pid=28848) [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28848)]
Standard Output
---------------------------------------------- trial-2358 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 10:54:49.881598 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:49.893455 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 10:54:50.021866 tst ping_idle_ping.py: using LAC 20972 10:54:50.138408 tst ping_idle_ping.py: using RAC 62 10:54:50.258188 tst ping_idle_ping.py: using CellId 20972 10:54:50.375505 tst ping_idle_ping.py: using BVCI 20973 10:54:50.398328 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:50.409068 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:50.419841 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:50.430745 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:50.441345 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:50.451832 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:50.462833 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:54:50.473794 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 10:54:50.760687 tst ping_idle_ping.py:24: start network... 10:54:50.893141 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:54:51.399573 run create_hlr_db(pid=28842): Launched 10:54:51.584544 bus /gobi_6: Setting Powered False 10:54:52.606791 run create_hlr_db(pid=28842): Terminated: ok {rc=0} 10:54:53.007409 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28844): Launched 10:54:53.306613 run osmo-hlr_10.42.42.2(pid=28845): Launched 10:54:53.416454 run osmo-stp_10.42.42.5: Starting osmo-stp 10:54:53.935090 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28847): Launched 10:54:54.233634 run osmo-stp_10.42.42.5(pid=28848): Launched 10:54:54.341006 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:54:54.860245 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28850): Launched 10:54:54.966576 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:54:55.226410 run patchelf(pid=28851): Launched 10:54:55.401633 run osmo-stp_10.42.42.5(pid=28848): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28848)] 10:54:55.529469 run osmo-stp_10.42.42.5(pid=28848): stdout: | (launched: 2022-12-09_10:54:54.085809) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:55.656872 run osmo-stp_10.42.42.5(pid=28848): stderr: | �[0;m�[38;5;43m20221209105454252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209105454252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209105454253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209105454253 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209105454254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209105454254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209105454254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:55.780758 run osmo-stp_10.42.42.5(pid=28848): stdout: | (launched: 2022-12-09_10:54:54.085809) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:55.903428 run osmo-stp_10.42.42.5(pid=28848): stderr: | �[0;m�[38;5;43m20221209105454252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209105454252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209105454253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209105454253 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209105454254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209105454254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209105454254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:56.046016 run patchelf(pid=28851): Terminating (SIGINT) 10:54:56.213257 run patchelf(pid=28851): Terminated: ok {rc=0} 10:54:56.243853 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28848): Process ended prematurely: osmo-stp_10.42.42.5(pid=28848) [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28848)] [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 10:54:56.252590 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 10:54:56.312549 run osmo-hlr_10.42.42.2(pid=28845): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28845)] 10:54:56.361206 run osmo-hlr_10.42.42.2(pid=28845): stdout: | (launched: 2022-12-09_10:54:53.158351) 10:54:56.410948 run osmo-hlr_10.42.42.2(pid=28845): stderr: | �[0;m�[1;31m20221209105453329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209105453329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209105453329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209105453329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209105453329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209105453329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209105453342 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209105453353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209105453353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209105453353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:54:56.453416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28844): Terminating (SIGTERM) 10:54:56.493133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28847): Terminating (SIGTERM) 10:54:56.532753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28850): Terminating (SIGTERM) 10:54:56.542171 --- ParallelTerminationStrategy: PID 28844 died... 10:54:56.595285 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28844): Terminated: ok {rc=0} 10:54:56.605020 --- ParallelTerminationStrategy: PID 28847 died... 10:54:56.657712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28847): Terminated: ok {rc=0} 10:54:56.667214 --- ParallelTerminationStrategy: PID 28850 died... 10:54:56.719744 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28850): Terminated: ok {rc=0} 10:54:56.807468 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28848): Process ended prematurely: osmo-stp_10.42.42.5(pid=28848) [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28848)]