Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=23848): Process ended prematurely: osmo-stp_10.42.42.5(pid=23848) [trial-2358↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23848)]
Standard Output
---------------------------------------------- trial-2358 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:06:04.699555 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:04.710378 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:06:04.852822 tst cs_paging_gprs_active.py: using LAC 20714 10:06:04.972926 tst cs_paging_gprs_active.py: using RAC 59 10:06:05.092788 tst cs_paging_gprs_active.py: using CellId 20714 10:06:05.212375 tst cs_paging_gprs_active.py: using BVCI 20715 10:06:05.235808 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.246979 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.257824 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.268514 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.279247 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.290053 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.300843 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.311568 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:06:05.322500 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:06:05.443965 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:06:05.739707 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:06:05.876421 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:06:06.213588 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23838): Launched 10:06:06.494975 run iperf3-srv_10.42.42.10(pid=23839): Launched 10:06:06.694920 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:06:06.831278 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:06:07.170056 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23840): Launched 10:06:07.451404 run iperf3-srv_10.42.42.10(pid=23841): Launched 10:06:07.651198 tst cs_paging_gprs_active.py:38: start network... 10:06:07.787647 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:06:08.303494 run create_hlr_db(pid=23842): Launched 10:06:08.491275 bus /gobi_6: Setting Powered False 10:06:09.513774 run create_hlr_db(pid=23842): Terminated: ok {rc=0} 10:06:09.947593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23844): Launched 10:06:10.274463 run osmo-hlr_10.42.42.2(pid=23845): Launched 10:06:10.395307 run osmo-stp_10.42.42.5: Starting osmo-stp 10:06:10.964475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23847): Launched 10:06:11.292356 run osmo-stp_10.42.42.5(pid=23848): Launched 10:06:11.409945 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:06:11.980136 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23850): Launched 10:06:12.096198 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:06:12.384892 run patchelf(pid=23856): Launched 10:06:12.575808 run osmo-stp_10.42.42.5(pid=23848): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23848)] 10:06:12.715613 run osmo-stp_10.42.42.5(pid=23848): stdout: | (launched: 2022-12-09_10:06:11.130627) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:06:12.855684 run osmo-stp_10.42.42.5(pid=23848): stderr: | �[0;m�[38;5;43m20221209100611319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209100611319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209100611320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209100611320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209100611321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209100611321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209100611321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:06:12.991249 run osmo-stp_10.42.42.5(pid=23848): stdout: | (launched: 2022-12-09_10:06:11.130627) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:06:13.125765 run osmo-stp_10.42.42.5(pid=23848): stderr: | �[0;m�[38;5;43m20221209100611319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209100611319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209100611320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209100611320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209100611321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209100611321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209100611321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:06:13.282780 run patchelf(pid=23856): Terminating (SIGINT) 10:06:13.465757 run patchelf(pid=23856): Terminated: ok {rc=0} 10:06:13.499458 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23848): Process ended prematurely: osmo-stp_10.42.42.5(pid=23848) [trial-2358↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23848)] [trial-2358↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:06:13.509363 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:06:13.573418 run osmo-hlr_10.42.42.2(pid=23845): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23845)] 10:06:13.625993 run osmo-hlr_10.42.42.2(pid=23845): stdout: | (launched: 2022-12-09_10:06:10.113738) 10:06:13.678969 run osmo-hlr_10.42.42.2(pid=23845): stderr: | �[0;m�[1;31m20221209100610313 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209100610313 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209100610313 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209100610313 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209100610313 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209100610313 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209100610326 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209100610334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209100610334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209100610334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:06:13.723622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23838): Terminating (SIGTERM) 10:06:13.766721 run iperf3-srv_10.42.42.10(pid=23839): Terminating (SIGTERM) 10:06:13.809252 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23840): Terminating (SIGTERM) 10:06:13.851453 run iperf3-srv_10.42.42.10(pid=23841): Terminating (SIGTERM) 10:06:13.894329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23844): Terminating (SIGTERM) 10:06:13.936578 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23847): Terminating (SIGTERM) 10:06:13.978965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23850): Terminating (SIGTERM) 10:06:13.988938 --- ParallelTerminationStrategy: PID 23838 died... 10:06:14.045583 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23838): Terminated: ok {rc=0} 10:06:14.055872 --- ParallelTerminationStrategy: PID 23839 died... 10:06:14.112112 run iperf3-srv_10.42.42.10(pid=23839): Terminated {rc=256} 10:06:14.122099 --- ParallelTerminationStrategy: PID 23840 died... 10:06:14.178537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23840): Terminated: ok {rc=0} 10:06:14.188758 --- ParallelTerminationStrategy: PID 23841 died... 10:06:14.245394 run iperf3-srv_10.42.42.10(pid=23841): Terminated {rc=256} 10:06:14.255648 --- ParallelTerminationStrategy: PID 23844 died... 10:06:14.312065 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23844): Terminated: ok {rc=0} 10:06:14.322145 --- ParallelTerminationStrategy: PID 23847 died... 10:06:14.378270 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23847): Terminated: ok {rc=0} 10:06:14.388304 --- ParallelTerminationStrategy: PID 23850 died... 10:06:14.444449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23850): Terminated: ok {rc=0} 10:06:14.532642 bus /gobi_0: Setting Powered False 10:06:15.638476 bus /gobi_0: Setting Powered False 10:06:16.768482 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23848): Process ended prematurely: osmo-stp_10.42.42.5(pid=23848) [trial-2358↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23848)]