Failed
gprs:trx-b200.iperf3.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=24597): Process ended prematurely: osmo-stp_10.42.42.5(pid=24597) [trial-2358↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24597)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-b200 iperf3.py ---------------------------------------------- 10:12:53.966346 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:53.977489 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:12:54.120740 tst iperf3.py: using LAC 20751 10:12:54.241589 tst iperf3.py: using RAC 96 10:12:54.367951 tst iperf3.py: using CellId 20751 10:12:54.495316 tst iperf3.py: using BVCI 20752 10:12:54.520140 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.531492 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.542467 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.553662 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.564511 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.575475 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.587111 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.598035 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:54.609438 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:12:54.884342 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:12:55.010985 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:12:55.324710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24589): Launched 10:12:55.586004 run iperf3-srv_10.42.42.10(pid=24590): Launched 10:12:55.768791 tst iperf3.py:8: start network... 10:12:55.894134 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:12:56.378609 run create_hlr_db(pid=24591): Launched 10:12:56.550815 bus /gobi_6: Setting Powered False 10:12:57.573237 run create_hlr_db(pid=24591): Terminated: ok {rc=0} 10:12:58.003434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24593): Launched 10:12:58.329177 run osmo-hlr_10.42.42.2(pid=24594): Launched 10:12:58.447808 run osmo-stp_10.42.42.5: Starting osmo-stp 10:12:59.013350 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24596): Launched 10:12:59.338540 run osmo-stp_10.42.42.5(pid=24597): Launched 10:12:59.456742 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:13:00.023463 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24599): Launched 10:13:00.139228 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:13:00.422830 run patchelf(pid=24600): Launched 10:13:00.612746 run osmo-stp_10.42.42.5(pid=24597): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24597)] 10:13:00.750930 run osmo-stp_10.42.42.5(pid=24597): stdout: | (launched: 2022-12-09_10:12:59.178278) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:00.916846 run osmo-stp_10.42.42.5(pid=24597): stderr: | �[0;m�[38;5;43m20221209101259367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101259367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101259367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101259367 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101259368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101259368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101259368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:01.058125 run osmo-stp_10.42.42.5(pid=24597): stdout: | (launched: 2022-12-09_10:12:59.178278) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:01.185411 run osmo-stp_10.42.42.5(pid=24597): stderr: | �[0;m�[38;5;43m20221209101259367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101259367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101259367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101259367 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101259368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101259368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101259368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:01.335710 run patchelf(pid=24600): Terminating (SIGINT) 10:13:01.509722 run patchelf(pid=24600): Terminated: ok {rc=0} 10:13:01.542836 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24597): Process ended prematurely: osmo-stp_10.42.42.5(pid=24597) [trial-2358↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24597)] [trial-2358↪gprs:trx-b200↪iperf3.py:8] 10:13:01.553308 tst iperf3.py:8: Test FAILED (7.6 sec) 10:13:01.617434 run osmo-hlr_10.42.42.2(pid=24594): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24594)] 10:13:01.670030 run osmo-hlr_10.42.42.2(pid=24594): stdout: | (launched: 2022-12-09_10:12:58.168035) 10:13:01.721993 run osmo-hlr_10.42.42.2(pid=24594): stderr: | �[0;m�[1;31m20221209101258362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209101258362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209101258362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209101258362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209101258362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209101258362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209101258373 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209101258382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209101258383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209101258383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:13:01.765904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24589): Terminating (SIGTERM) 10:13:01.809701 run iperf3-srv_10.42.42.10(pid=24590): Terminating (SIGTERM) 10:13:01.855357 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24593): Terminating (SIGTERM) 10:13:01.898483 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24596): Terminating (SIGTERM) 10:13:01.942727 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24599): Terminating (SIGTERM) 10:13:01.954576 --- ParallelTerminationStrategy: PID 24589 died... 10:13:02.011460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24589): Terminated: ok {rc=0} 10:13:02.022981 --- ParallelTerminationStrategy: PID 24590 died... 10:13:02.078756 run iperf3-srv_10.42.42.10(pid=24590): Terminated {rc=256} 10:13:02.089091 --- ParallelTerminationStrategy: PID 24593 died... 10:13:02.143327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24593): Terminated: ok {rc=0} 10:13:02.153473 --- ParallelTerminationStrategy: PID 24596 died... 10:13:02.208629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24596): Terminated: ok {rc=0} 10:13:02.218769 --- ParallelTerminationStrategy: PID 24599 died... 10:13:02.272685 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24599): Terminated: ok {rc=0} 10:13:02.361977 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24597): Process ended prematurely: osmo-stp_10.42.42.5(pid=24597) [trial-2358↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24597)]