Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=24625): Process ended prematurely: osmo-stp_10.42.42.5(pid=24625) [trial-2358↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24625)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-b200 ping.py ---------------------------------------------- 10:13:23.270946 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.282803 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:13:23.433262 tst ping.py: using LAC 20753 10:13:23.558894 tst ping.py: using RAC 98 10:13:23.685635 tst ping.py: using CellId 20753 10:13:23.814981 tst ping.py: using BVCI 20754 10:13:23.839765 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.850825 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.861762 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.872858 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.883864 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.894984 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.906336 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:13:23.917478 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:13:24.193371 tst ping.py:19: start network... 10:13:24.318523 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:13:24.804084 run create_hlr_db(pid=24619): Launched 10:13:24.978590 bus /gobi_6: Setting Powered False 10:13:25.999071 run create_hlr_db(pid=24619): Terminated: ok {rc=0} 10:13:26.432361 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24621): Launched 10:13:26.758076 run osmo-hlr_10.42.42.2(pid=24622): Launched 10:13:26.878485 run osmo-stp_10.42.42.5: Starting osmo-stp 10:13:27.447706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24624): Launched 10:13:27.773621 run osmo-stp_10.42.42.5(pid=24625): Launched 10:13:27.889740 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:13:28.452333 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24627): Launched 10:13:28.567407 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:13:28.850921 run patchelf(pid=24628): Launched 10:13:29.040428 run osmo-stp_10.42.42.5(pid=24625): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24625)] 10:13:29.178146 run osmo-stp_10.42.42.5(pid=24625): stdout: | (launched: 2022-12-09_10:13:27.612458) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:29.316048 run osmo-stp_10.42.42.5(pid=24625): stderr: | �[0;m�[38;5;43m20221209101327805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101327805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101327806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101327806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101327806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101327807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101327807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:29.449560 run osmo-stp_10.42.42.5(pid=24625): stdout: | (launched: 2022-12-09_10:13:27.612458) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:29.582478 run osmo-stp_10.42.42.5(pid=24625): stderr: | �[0;m�[38;5;43m20221209101327805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101327805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101327806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101327806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101327806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101327807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101327807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:29.735892 run patchelf(pid=24628): Terminating (SIGINT) 10:13:29.915913 run patchelf(pid=24628): Terminated: ok {rc=0} 10:13:29.948841 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24625): Process ended prematurely: osmo-stp_10.42.42.5(pid=24625) [trial-2358↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24625)] [trial-2358↪gprs:trx-b200↪ping.py:22] 10:13:29.958253 tst ping.py:22: Test FAILED (6.7 sec) 10:13:30.023280 run osmo-hlr_10.42.42.2(pid=24622): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24622)] 10:13:30.075827 run osmo-hlr_10.42.42.2(pid=24622): stdout: | (launched: 2022-12-09_10:13:26.597212) 10:13:30.129072 run osmo-hlr_10.42.42.2(pid=24622): stderr: | �[0;m�[1;31m20221209101326795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209101326795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209101326795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209101326795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209101326795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209101326795 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209101326811 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209101326821 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209101326822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209101326822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:13:30.174264 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24621): Terminating (SIGTERM) 10:13:30.217647 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24624): Terminating (SIGTERM) 10:13:30.260070 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24627): Terminating (SIGTERM) 10:13:30.270276 --- ParallelTerminationStrategy: PID 24621 died... 10:13:30.327665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24621): Terminated: ok {rc=0} 10:13:30.337994 --- ParallelTerminationStrategy: PID 24624 died... 10:13:30.395189 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24624): Terminated: ok {rc=0} 10:13:30.405600 --- ParallelTerminationStrategy: PID 24627 died... 10:13:30.462854 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24627): Terminated: ok {rc=0} 10:13:30.551482 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24625): Process ended prematurely: osmo-stp_10.42.42.5(pid=24625) [trial-2358↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24625)]