Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=27544): Process ended prematurely: osmo-stp_10.42.42.5(pid=27544) [trial-2358↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27544)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:39:55.128369 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.139553 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:39:55.286930 tst cs_paging_gprs_active.py: using LAC 20893 10:39:55.414462 tst cs_paging_gprs_active.py: using RAC 238 10:39:55.541286 tst cs_paging_gprs_active.py: using CellId 20893 10:39:55.670314 tst cs_paging_gprs_active.py: using BVCI 20894 10:39:55.695231 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.706553 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.717545 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.729023 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.740297 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.751626 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.763901 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.775141 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:39:55.786629 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:39:55.909277 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:39:56.203387 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:39:56.340323 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:39:56.676437 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27534): Launched 10:39:56.956058 run iperf3-srv_10.42.42.10(pid=27535): Launched 10:39:57.163337 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:39:57.299242 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:39:57.633892 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27536): Launched 10:39:57.914130 run iperf3-srv_10.42.42.10(pid=27537): Launched 10:39:58.113195 tst cs_paging_gprs_active.py:38: start network... 10:39:58.249324 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:39:58.759846 run create_hlr_db(pid=27538): Launched 10:39:58.947010 bus /gobi_6: Setting Powered False 10:39:59.968474 run create_hlr_db(pid=27538): Terminated: ok {rc=0} 10:40:00.373267 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27540): Launched 10:40:00.675326 run osmo-hlr_10.42.42.2(pid=27541): Launched 10:40:00.795188 run osmo-stp_10.42.42.5: Starting osmo-stp 10:40:01.355800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27543): Launched 10:40:01.827338 run osmo-stp_10.42.42.5(pid=27544): Launched 10:40:01.955674 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:40:02.527238 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27549): Launched 10:40:02.633731 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:40:02.895798 run patchelf(pid=27550): Launched 10:40:03.073811 run osmo-stp_10.42.42.5(pid=27544): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27544)] 10:40:03.202162 run osmo-stp_10.42.42.5(pid=27544): stdout: | (launched: 2022-12-09_10:40:01.526662) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:40:03.330974 run osmo-stp_10.42.42.5(pid=27544): stderr: | �[0;m�[38;5;43m20221209104001715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209104001715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209104001716 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209104001716 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209104001717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209104001717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209104001717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:40:03.455765 run osmo-stp_10.42.42.5(pid=27544): stdout: | (launched: 2022-12-09_10:40:01.526662) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:40:03.579360 run osmo-stp_10.42.42.5(pid=27544): stderr: | �[0;m�[38;5;43m20221209104001715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209104001715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209104001716 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209104001716 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209104001717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209104001717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209104001717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:40:03.723003 run patchelf(pid=27550): Terminating (SIGINT) 10:40:03.891969 run patchelf(pid=27550): Terminated: ok {rc=0} 10:40:03.923000 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27544): Process ended prematurely: osmo-stp_10.42.42.5(pid=27544) [trial-2358↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27544)] [trial-2358↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:40:03.932177 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:40:03.991736 run osmo-hlr_10.42.42.2(pid=27541): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27541)] 10:40:04.040389 run osmo-hlr_10.42.42.2(pid=27541): stdout: | (launched: 2022-12-09_10:40:00.526842) 10:40:04.089666 run osmo-hlr_10.42.42.2(pid=27541): stderr: | �[0;m�[1;31m20221209104000701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209104000701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209104000701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209104000701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209104000701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209104000701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209104000713 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209104000723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209104000723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209104000723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:40:04.131553 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27534): Terminating (SIGTERM) 10:40:04.170841 run iperf3-srv_10.42.42.10(pid=27535): Terminating (SIGTERM) 10:40:04.210278 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27536): Terminating (SIGTERM) 10:40:04.249595 run iperf3-srv_10.42.42.10(pid=27537): Terminating (SIGTERM) 10:40:04.289048 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27540): Terminating (SIGTERM) 10:40:04.328339 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27543): Terminating (SIGTERM) 10:40:04.367724 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27549): Terminating (SIGTERM) 10:40:04.377011 --- ParallelTerminationStrategy: PID 27534 died... 10:40:04.429784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27534): Terminated: ok {rc=0} 10:40:04.439493 --- ParallelTerminationStrategy: PID 27535 died... 10:40:04.491815 run iperf3-srv_10.42.42.10(pid=27535): Terminated {rc=256} 10:40:04.501482 --- ParallelTerminationStrategy: PID 27536 died... 10:40:04.553906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27536): Terminated: ok {rc=0} 10:40:04.563491 --- ParallelTerminationStrategy: PID 27537 died... 10:40:04.616282 run iperf3-srv_10.42.42.10(pid=27537): Terminated {rc=256} 10:40:04.625979 --- ParallelTerminationStrategy: PID 27540 died... 10:40:04.678700 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27540): Terminated: ok {rc=0} 10:40:04.688319 --- ParallelTerminationStrategy: PID 27543 died... 10:40:04.740762 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27543): Terminated: ok {rc=0} 10:40:04.750425 --- ParallelTerminationStrategy: PID 27549 died... 10:40:04.802998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27549): Terminated: ok {rc=0} 10:40:04.891486 bus /gobi_0: Setting Powered False 10:40:05.994533 bus /gobi_0: Setting Powered False 10:40:07.105606 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27544): Process ended prematurely: osmo-stp_10.42.42.5(pid=27544) [trial-2358↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27544)]