Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=26864): Process ended prematurely: osmo-stp_10.42.42.5(pid=26864) [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26864)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 10:34:01.198889 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.211998 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 10:34:01.376747 tst cs_paging_gprs_active.py: using LAC 20861 10:34:01.501151 tst cs_paging_gprs_active.py: using RAC 206 10:34:01.625867 tst cs_paging_gprs_active.py: using CellId 20861 10:34:01.783816 tst cs_paging_gprs_active.py: using BVCI 20862 10:34:01.818744 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.834266 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.850294 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.866414 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.881788 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.895437 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.912286 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.928531 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:34:01.944917 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:34:02.092762 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:34:02.411757 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:34:02.548738 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:34:02.887266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26854): Launched 10:34:03.168378 run iperf3-srv_10.42.42.10(pid=26855): Launched 10:34:03.368152 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:34:03.504334 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:34:03.842481 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26856): Launched 10:34:04.123390 run iperf3-srv_10.42.42.10(pid=26857): Launched 10:34:04.322632 tst cs_paging_gprs_active.py:38: start network... 10:34:04.459385 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:34:04.971807 run create_hlr_db(pid=26858): Launched 10:34:05.161502 bus /gobi_6: Setting Powered False 10:34:06.182344 run create_hlr_db(pid=26858): Terminated: ok {rc=0} 10:34:06.592940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26860): Launched 10:34:06.900658 run osmo-hlr_10.42.42.2(pid=26861): Launched 10:34:07.013048 run osmo-stp_10.42.42.5: Starting osmo-stp 10:34:07.545424 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26863): Launched 10:34:07.853292 run osmo-stp_10.42.42.5(pid=26864): Launched 10:34:07.963841 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:34:08.495677 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26866): Launched 10:34:08.603707 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:34:08.868826 run patchelf(pid=26867): Launched 10:34:09.047024 run osmo-stp_10.42.42.5(pid=26864): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26864)] 10:34:09.177209 run osmo-stp_10.42.42.5(pid=26864): stdout: | (launched: 2022-12-09_10:34:07.699551) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:34:09.306945 run osmo-stp_10.42.42.5(pid=26864): stderr: | �[0;m�[38;5;43m20221209103407866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103407866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103407867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103407867 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103407867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103407868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103407868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:34:09.432636 run osmo-stp_10.42.42.5(pid=26864): stdout: | (launched: 2022-12-09_10:34:07.699551) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:34:09.557318 run osmo-stp_10.42.42.5(pid=26864): stderr: | �[0;m�[38;5;43m20221209103407866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103407866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103407867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103407867 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103407867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103407868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103407868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:34:09.701762 run patchelf(pid=26867): Terminating (SIGINT) 10:34:09.871511 run patchelf(pid=26867): Terminated: ok {rc=0} 10:34:09.902777 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26864): Process ended prematurely: osmo-stp_10.42.42.5(pid=26864) [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26864)] [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 10:34:09.912114 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:34:09.972550 run osmo-hlr_10.42.42.2(pid=26861): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26861)] 10:34:10.021857 run osmo-hlr_10.42.42.2(pid=26861): stdout: | (launched: 2022-12-09_10:34:06.749321) 10:34:10.071977 run osmo-hlr_10.42.42.2(pid=26861): stderr: | �[0;m�[1;31m20221209103406923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209103406923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209103406923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209103406923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209103406923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209103406923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209103406938 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209103406948 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209103406948 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209103406949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:34:10.114611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26854): Terminating (SIGTERM) 10:34:10.154434 run iperf3-srv_10.42.42.10(pid=26855): Terminating (SIGTERM) 10:34:10.194361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26856): Terminating (SIGTERM) 10:34:10.234166 run iperf3-srv_10.42.42.10(pid=26857): Terminating (SIGTERM) 10:34:10.274009 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26860): Terminating (SIGTERM) 10:34:10.313850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26863): Terminating (SIGTERM) 10:34:10.353535 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26866): Terminating (SIGTERM) 10:34:10.362709 --- ParallelTerminationStrategy: PID 26854 died... 10:34:10.416523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26854): Terminated: ok {rc=0} 10:34:10.426317 --- ParallelTerminationStrategy: PID 26855 died... 10:34:10.479158 run iperf3-srv_10.42.42.10(pid=26855): Terminated {rc=256} 10:34:10.488658 --- ParallelTerminationStrategy: PID 26856 died... 10:34:10.541572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26856): Terminated: ok {rc=0} 10:34:10.551123 --- ParallelTerminationStrategy: PID 26857 died... 10:34:10.604191 run iperf3-srv_10.42.42.10(pid=26857): Terminated {rc=256} 10:34:10.613683 --- ParallelTerminationStrategy: PID 26860 died... 10:34:10.666493 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26860): Terminated: ok {rc=0} 10:34:10.676077 --- ParallelTerminationStrategy: PID 26863 died... 10:34:10.729432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26863): Terminated: ok {rc=0} 10:34:10.739043 --- ParallelTerminationStrategy: PID 26866 died... 10:34:10.791940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26866): Terminated: ok {rc=0} 10:34:10.881678 bus /gobi_0: Setting Powered False 10:34:12.001884 bus /gobi_0: Setting Powered False 10:34:13.110869 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26864): Process ended prematurely: osmo-stp_10.42.42.5(pid=26864) [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26864)]