Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31886): Process ended prematurely: osmo-stp_10.42.42.5(pid=31886) [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31886)]
Standard Output
---------------------------------------------- trial-2359 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 11:26:29.341458 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.353425 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:26:29.499388 tst ping_idle_ping.py: using LAC 21137 11:26:29.621045 tst ping_idle_ping.py: using RAC 227 11:26:29.748082 tst ping_idle_ping.py: using CellId 21137 11:26:29.868118 tst ping_idle_ping.py: using BVCI 21138 11:26:29.891531 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.902480 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.913075 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.924107 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.934740 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.945271 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.955997 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:26:29.967257 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:26:30.263992 tst ping_idle_ping.py:24: start network... 11:26:30.400854 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:26:30.984029 run create_hlr_db(pid=31880): Launched 11:26:31.180308 bus /gobi_6: Setting Powered False 11:26:32.187307 run create_hlr_db(pid=31880): Terminated: ok {rc=0} 11:26:32.640759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31882): Launched 11:26:32.973438 run osmo-hlr_10.42.42.2(pid=31883): Launched 11:26:33.095298 run osmo-stp_10.42.42.5: Starting osmo-stp 11:26:33.669501 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31885): Launched 11:26:33.997788 run osmo-stp_10.42.42.5(pid=31886): Launched 11:26:34.117062 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:26:34.692521 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31888): Launched 11:26:34.810743 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:26:35.098822 run patchelf(pid=31889): Launched 11:26:35.291340 run osmo-stp_10.42.42.5(pid=31886): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31886)] 11:26:35.431841 run osmo-stp_10.42.42.5(pid=31886): stdout: | (launched: 2022-12-09_11:26:33.836623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:26:35.572538 run osmo-stp_10.42.42.5(pid=31886): stderr: | �[0;m�[38;5;43m20221209112634031 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112634031 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112634032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112634032 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112634033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112634033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112634033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:26:35.708807 run osmo-stp_10.42.42.5(pid=31886): stdout: | (launched: 2022-12-09_11:26:33.836623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:26:35.843354 run osmo-stp_10.42.42.5(pid=31886): stderr: | �[0;m�[38;5;43m20221209112634031 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112634031 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112634032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112634032 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112634033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112634033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112634033 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:26:36.001277 run patchelf(pid=31889): Terminating (SIGINT) 11:26:36.187498 run patchelf(pid=31889): Terminated: ok {rc=0} 11:26:36.221082 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31886): Process ended prematurely: osmo-stp_10.42.42.5(pid=31886) [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31886)] [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 11:26:36.230434 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 11:26:36.294766 run osmo-hlr_10.42.42.2(pid=31883): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31883)] 11:26:36.347272 run osmo-hlr_10.42.42.2(pid=31883): stdout: | (launched: 2022-12-09_11:26:32.809942) 11:26:36.400343 run osmo-hlr_10.42.42.2(pid=31883): stderr: | �[0;m�[1;31m20221209112633008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209112633008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209112633008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209112633008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209112633008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209112633008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209112633020 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209112633029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209112633029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209112633029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:26:36.445237 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31882): Terminating (SIGTERM) 11:26:36.487725 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31885): Terminating (SIGTERM) 11:26:36.530859 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31888): Terminating (SIGTERM) 11:26:36.540564 --- ParallelTerminationStrategy: PID 31882 died... 11:26:36.597102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31882): Terminated: ok {rc=0} 11:26:36.607188 --- ParallelTerminationStrategy: PID 31885 died... 11:26:36.663721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31885): Terminated: ok {rc=0} 11:26:36.673848 --- ParallelTerminationStrategy: PID 31888 died... 11:26:36.729963 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31888): Terminated: ok {rc=0} 11:26:36.817758 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31886): Process ended prematurely: osmo-stp_10.42.42.5(pid=31886) [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31886)]