Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31905): Process ended prematurely: osmo-stp_10.42.42.5(pid=31905) [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31905)]
Standard Output
---------------------------------------------- trial-2359 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:26:38.945689 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:38.957102 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:26:39.111737 tst cs_paging_gprs_active.py: using LAC 21138 11:26:39.244031 tst cs_paging_gprs_active.py: using RAC 228 11:26:39.376009 tst cs_paging_gprs_active.py: using CellId 21138 11:26:39.508908 tst cs_paging_gprs_active.py: using BVCI 21139 11:26:39.534800 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.546183 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.557347 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.568636 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.580057 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.591440 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.603001 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.614289 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:26:39.625850 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:26:39.746905 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:26:40.035847 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:26:40.167550 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:26:40.491407 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31895): Launched 11:26:40.761443 run iperf3-srv_10.42.42.10(pid=31896): Launched 11:26:40.952544 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:26:41.086267 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:26:41.432852 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31897): Launched 11:26:41.722438 run iperf3-srv_10.42.42.10(pid=31898): Launched 11:26:41.927815 tst cs_paging_gprs_active.py:38: start network... 11:26:42.067387 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:26:42.593484 run create_hlr_db(pid=31899): Launched 11:26:42.787275 bus /gobi_6: Setting Powered False 11:26:43.807790 run create_hlr_db(pid=31899): Terminated: ok {rc=0} 11:26:44.250941 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31901): Launched 11:26:44.586498 run osmo-hlr_10.42.42.2(pid=31902): Launched 11:26:44.710861 run osmo-stp_10.42.42.5: Starting osmo-stp 11:26:45.291320 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31904): Launched 11:26:45.627054 run osmo-stp_10.42.42.5(pid=31905): Launched 11:26:45.749337 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:26:46.371662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31907): Launched 11:26:46.494496 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:26:46.805323 run patchelf(pid=31908): Launched 11:26:47.005020 run osmo-stp_10.42.42.5(pid=31905): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31905)] 11:26:47.150607 run osmo-stp_10.42.42.5(pid=31905): stdout: | (launched: 2022-12-09_11:26:45.460573) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:26:47.294090 run osmo-stp_10.42.42.5(pid=31905): stderr: | �[0;m�[38;5;43m20221209112645653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112645653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112645653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112645653 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112645654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112645654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112645654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:26:47.432616 run osmo-stp_10.42.42.5(pid=31905): stdout: | (launched: 2022-12-09_11:26:45.460573) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:26:47.570598 run osmo-stp_10.42.42.5(pid=31905): stderr: | �[0;m�[38;5;43m20221209112645653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112645653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112645653 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112645653 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112645654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112645654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112645654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:26:47.732656 run patchelf(pid=31908): Terminating (SIGINT) 11:26:47.922115 run patchelf(pid=31908): Terminated: ok {rc=0} 11:26:47.956727 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31905): Process ended prematurely: osmo-stp_10.42.42.5(pid=31905) [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31905)] [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:26:47.966874 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 11:26:48.031971 run osmo-hlr_10.42.42.2(pid=31902): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31902)] 11:26:48.084292 run osmo-hlr_10.42.42.2(pid=31902): stdout: | (launched: 2022-12-09_11:26:44.421273) 11:26:48.136835 run osmo-hlr_10.42.42.2(pid=31902): stderr: | �[0;m�[1;31m20221209112644622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209112644622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209112644622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209112644622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209112644622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209112644622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209112644638 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209112644648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209112644648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209112644648 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:26:48.182429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31895): Terminating (SIGTERM) 11:26:48.224796 run iperf3-srv_10.42.42.10(pid=31896): Terminating (SIGTERM) 11:26:48.267837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31897): Terminating (SIGTERM) 11:26:48.310372 run iperf3-srv_10.42.42.10(pid=31898): Terminating (SIGTERM) 11:26:48.352699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31901): Terminating (SIGTERM) 11:26:48.395528 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31904): Terminating (SIGTERM) 11:26:48.437974 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31907): Terminating (SIGTERM) 11:26:48.448044 --- ParallelTerminationStrategy: PID 31895 died... 11:26:48.505620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31895): Terminated: ok {rc=0} 11:26:48.515741 --- ParallelTerminationStrategy: PID 31896 died... 11:26:48.572481 run iperf3-srv_10.42.42.10(pid=31896): Terminated {rc=256} 11:26:48.582565 --- ParallelTerminationStrategy: PID 31897 died... 11:26:48.639275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31897): Terminated: ok {rc=0} 11:26:48.649870 --- ParallelTerminationStrategy: PID 31898 died... 11:26:48.707029 run iperf3-srv_10.42.42.10(pid=31898): Terminated {rc=256} 11:26:48.717827 --- ParallelTerminationStrategy: PID 31901 died... 11:26:48.774605 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31901): Terminated: ok {rc=0} 11:26:48.784754 --- ParallelTerminationStrategy: PID 31904 died... 11:26:48.841173 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31904): Terminated: ok {rc=0} 11:26:48.851879 --- ParallelTerminationStrategy: PID 31907 died... 11:26:48.908596 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31907): Terminated: ok {rc=0} 11:26:48.995792 bus /gobi_0: Setting Powered False 11:26:50.102649 bus /gobi_0: Setting Powered False 11:26:51.211801 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31905): Process ended prematurely: osmo-stp_10.42.42.5(pid=31905) [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31905)]