Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1386): Process ended prematurely: osmo-stp_10.42.42.5(pid=1386) [trial-2359↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1386)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:42:22.912254 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:22.923388 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:42:23.083265 tst cs_paging_gprs_active.py: using LAC 21221 11:42:23.204774 tst cs_paging_gprs_active.py: using RAC 56 11:42:23.327370 tst cs_paging_gprs_active.py: using CellId 21221 11:42:23.451557 tst cs_paging_gprs_active.py: using BVCI 21222 11:42:23.475372 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.486273 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.496852 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.508069 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.518863 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.530358 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.541599 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.552416 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:42:23.563518 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:42:23.685696 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:42:23.973744 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:42:24.103229 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:42:24.426084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1376): Launched 11:42:24.694260 run iperf3-srv_10.42.42.10(pid=1377): Launched 11:42:24.883871 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:42:25.013216 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:42:25.335454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1378): Launched 11:42:25.607077 run iperf3-srv_10.42.42.10(pid=1379): Launched 11:42:25.794837 tst cs_paging_gprs_active.py:38: start network... 11:42:25.923354 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:42:26.419372 run create_hlr_db(pid=1380): Launched 11:42:26.596872 bus /gobi_6: Setting Powered False 11:42:27.619928 run create_hlr_db(pid=1380): Terminated: ok {rc=0} 11:42:28.032417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1382): Launched 11:42:28.344273 run osmo-hlr_10.42.42.2(pid=1383): Launched 11:42:28.457400 run osmo-stp_10.42.42.5: Starting osmo-stp 11:42:28.993743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1385): Launched 11:42:29.303579 run osmo-stp_10.42.42.5(pid=1386): Launched 11:42:29.415339 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:42:29.955007 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1388): Launched 11:42:30.065466 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:42:30.337505 run patchelf(pid=1389): Launched 11:42:30.519297 run osmo-stp_10.42.42.5(pid=1386): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1386)] 11:42:30.651700 run osmo-stp_10.42.42.5(pid=1386): stdout: | (launched: 2022-12-09_11:42:29.151176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:42:30.784195 run osmo-stp_10.42.42.5(pid=1386): stderr: | �[0;m�[38;5;43m20221209114229317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209114229317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209114229318 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209114229318 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209114229318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209114229318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209114229319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:42:30.918936 run osmo-stp_10.42.42.5(pid=1386): stdout: | (launched: 2022-12-09_11:42:29.151176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:42:31.050631 run osmo-stp_10.42.42.5(pid=1386): stderr: | �[0;m�[38;5;43m20221209114229317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209114229317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209114229318 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209114229318 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209114229318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209114229318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209114229319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:42:31.205249 run patchelf(pid=1389): Terminating (SIGINT) 11:42:31.385984 run patchelf(pid=1389): Terminated: ok {rc=0} 11:42:31.419557 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1386): Process ended prematurely: osmo-stp_10.42.42.5(pid=1386) [trial-2359↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1386)] [trial-2359↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:42:31.429652 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 11:42:31.492082 run osmo-hlr_10.42.42.2(pid=1383): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1383)] 11:42:31.542992 run osmo-hlr_10.42.42.2(pid=1383): stdout: | (launched: 2022-12-09_11:42:28.189754) 11:42:31.594982 run osmo-hlr_10.42.42.2(pid=1383): stderr: | �[0;m�[1;31m20221209114228367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209114228367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209114228367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209114228367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209114228367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209114228367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209114228379 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209114228387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209114228387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209114228387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:42:31.639589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1376): Terminating (SIGTERM) 11:42:31.683431 run iperf3-srv_10.42.42.10(pid=1377): Terminating (SIGTERM) 11:42:31.724888 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1378): Terminating (SIGTERM) 11:42:31.765856 run iperf3-srv_10.42.42.10(pid=1379): Terminating (SIGTERM) 11:42:31.807263 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1382): Terminating (SIGTERM) 11:42:31.848143 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1385): Terminating (SIGTERM) 11:42:31.889030 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1388): Terminating (SIGTERM) 11:42:31.898493 --- ParallelTerminationStrategy: PID 1376 died... 11:42:31.953651 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1376): Terminated: ok {rc=0} 11:42:31.963794 --- ParallelTerminationStrategy: PID 1377 died... 11:42:32.018200 run iperf3-srv_10.42.42.10(pid=1377): Terminated {rc=256} 11:42:32.028434 --- ParallelTerminationStrategy: PID 1378 died... 11:42:32.083021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1378): Terminated: ok {rc=0} 11:42:32.093364 --- ParallelTerminationStrategy: PID 1379 died... 11:42:32.148027 run iperf3-srv_10.42.42.10(pid=1379): Terminated {rc=256} 11:42:32.158141 --- ParallelTerminationStrategy: PID 1382 died... 11:42:32.212345 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1382): Terminated: ok {rc=0} 11:42:32.222591 --- ParallelTerminationStrategy: PID 1385 died... 11:42:32.277529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1385): Terminated: ok {rc=0} 11:42:32.287265 --- ParallelTerminationStrategy: PID 1388 died... 11:42:32.341216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1388): Terminated: ok {rc=0} 11:42:32.431120 bus /gobi_0: Setting Powered False 11:42:33.536213 bus /gobi_0: Setting Powered False 11:42:34.648319 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1386): Process ended prematurely: osmo-stp_10.42.42.5(pid=1386) [trial-2359↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1386)]