Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-umtrx.ping.py (from gprs_trx-umtrx)

Failing for the past 160 builds (Since #2200 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=2754): Process ended prematurely: osmo-stp_10.42.42.5(pid=2754) [trial-2359↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2754)]

Standard Output

----------------------------------------------
trial-2359 gprs:trx-umtrx ping.py
----------------------------------------------
11:58:25.584933 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:25.597058 tst                   gprs:trx-umtrx: Using 1 x bts (candidates: 1)
11:58:25.747107 tst                          ping.py: using LAC 21305
11:58:25.872031 tst                          ping.py: using RAC 140
11:58:25.992575 tst                          ping.py: using CellId 21305
11:58:26.110021 tst                          ping.py: using BVCI 21306
11:58:26.133223 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:26.143994 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:26.154765 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:26.165572 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:26.176263 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:26.187098 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:26.197838 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
11:58:26.208383 tst                   gprs:trx-umtrx: Using 1 x modem (candidates: 4)
11:58:26.502433 tst                       ping.py:19: start network...
11:58:26.638624 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:58:27.149386 run          create_hlr_db(pid=2748): Launched
11:58:27.338380 bus                          /gobi_6: Setting Powered False
11:58:28.357874 run          create_hlr_db(pid=2748): Terminated: ok {rc=0}
11:58:28.793058 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2750): Launched
11:58:29.118993 run    osmo-hlr_10.42.42.2(pid=2751): Launched
11:58:29.236906 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:58:29.808242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2753): Launched
11:58:30.133664 run    osmo-stp_10.42.42.5(pid=2754): Launched
11:58:30.251343 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:58:30.821502 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2756): Launched
11:58:30.940322 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:58:31.243232 run               patchelf(pid=2757): Launched
11:58:31.439144 run    osmo-stp_10.42.42.5(pid=2754): ERR: Terminated: ERROR {rc=1}  [trial-2359↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2754)]
11:58:31.598558 run    osmo-stp_10.42.42.5(pid=2754): stdout: 
| (launched: 2022-12-09_11:58:29.973513)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:58:31.766362 run    osmo-stp_10.42.42.5(pid=2754): stderr: 
| �[0;m�[38;5;43m20221209115830161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209115830161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209115830162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209115830162 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209115830162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209115830163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209115830163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:58:31.908540 run    osmo-stp_10.42.42.5(pid=2754): stdout: 
| (launched: 2022-12-09_11:58:29.973513)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:58:32.046376 run    osmo-stp_10.42.42.5(pid=2754): stderr: 
| �[0;m�[38;5;43m20221209115830161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209115830161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209115830162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209115830162 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209115830162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209115830163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209115830163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:58:32.206749 run               patchelf(pid=2757): Terminating (SIGINT)
11:58:32.394626 run               patchelf(pid=2757): Terminated: ok {rc=0}
11:58:32.428042 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=2754): Process ended prematurely: osmo-stp_10.42.42.5(pid=2754) [trial-2359↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2754)]  [trial-2359↪gprs:trx-umtrx↪ping.py:22]
11:58:32.437482 tst                       ping.py:22: Test FAILED (6.8 sec)
11:58:32.504565 run    osmo-hlr_10.42.42.2(pid=2751): ERR: Terminated: ERROR {rc=237}  [trial-2359↪gprs:trx-umtrx↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2751)]
11:58:32.558357 run    osmo-hlr_10.42.42.2(pid=2751): stdout: 
| (launched: 2022-12-09_11:58:28.957727) 
11:58:32.613470 run    osmo-hlr_10.42.42.2(pid=2751): stderr: 
| �[0;m�[1;31m20221209115829154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209115829154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209115829154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209115829154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209115829154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209115829154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209115829167 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-umtrx/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209115829176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209115829176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209115829176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:58:32.660113 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2750): Terminating (SIGTERM)
11:58:32.704193 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2753): Terminating (SIGTERM)
11:58:32.748015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2756): Terminating (SIGTERM)
11:58:32.758742 ---      ParallelTerminationStrategy: PID 2750 died...
11:58:32.818153 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2750): Terminated: ok {rc=0}
11:58:32.828647 ---      ParallelTerminationStrategy: PID 2753 died...
11:58:32.887689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2753): Terminated: ok {rc=0}
11:58:32.898139 ---      ParallelTerminationStrategy: PID 2756 died...
11:58:32.957024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2756): Terminated: ok {rc=0}
11:58:33.046453 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2754): Process ended prematurely: osmo-stp_10.42.42.5(pid=2754) [trial-2359↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2754)]