Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=12791): Process ended prematurely: osmo-stp_10.42.42.5(pid=12791) [trial-2360↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12791)]
Standard Output
---------------------------------------------- trial-2360 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 13:50:21.708999 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:21.720728 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 13:50:21.861457 tst ping_idle_ping.py: using LAC 21894 13:50:21.986793 tst ping_idle_ping.py: using RAC 219 13:50:22.110769 tst ping_idle_ping.py: using CellId 21894 13:50:22.233478 tst ping_idle_ping.py: using BVCI 21895 13:50:22.257797 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:22.269361 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:22.280585 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:22.292463 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:22.304292 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:22.316209 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:22.328237 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:50:22.340253 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 13:50:22.616802 tst ping_idle_ping.py:24: start network... 13:50:22.740074 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:50:23.218052 run create_hlr_db(pid=12785): Launched 13:50:23.389587 bus /gobi_6: Setting Powered False 13:50:24.410918 run create_hlr_db(pid=12785): Terminated: ok {rc=0} 13:50:24.832879 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12787): Launched 13:50:25.150719 run osmo-hlr_10.42.42.2(pid=12788): Launched 13:50:25.269700 run osmo-stp_10.42.42.5: Starting osmo-stp 13:50:25.822443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12790): Launched 13:50:26.140275 run osmo-stp_10.42.42.5(pid=12791): Launched 13:50:26.255615 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:50:26.810065 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12793): Launched 13:50:26.923779 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:50:27.200839 run patchelf(pid=12794): Launched 13:50:27.387180 run osmo-stp_10.42.42.5(pid=12791): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12791)] 13:50:27.523346 run osmo-stp_10.42.42.5(pid=12791): stdout: | (launched: 2022-12-09_13:50:25.984087) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:50:27.660448 run osmo-stp_10.42.42.5(pid=12791): stderr: | �[0;m�[38;5;43m20221209135026176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135026176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135026176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135026176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135026177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135026177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135026177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:50:27.792475 run osmo-stp_10.42.42.5(pid=12791): stdout: | (launched: 2022-12-09_13:50:25.984087) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:50:27.923780 run osmo-stp_10.42.42.5(pid=12791): stderr: | �[0;m�[38;5;43m20221209135026176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135026176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135026176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135026176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135026177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135026177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135026177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:50:28.075738 run patchelf(pid=12794): Terminating (SIGINT) 13:50:28.253681 run patchelf(pid=12794): Terminated: ok {rc=0} 13:50:28.285999 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=12791): Process ended prematurely: osmo-stp_10.42.42.5(pid=12791) [trial-2360↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12791)] [trial-2360↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 13:50:28.295363 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 13:50:28.359043 run osmo-hlr_10.42.42.2(pid=12788): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12788)] 13:50:28.410975 run osmo-hlr_10.42.42.2(pid=12788): stdout: | (launched: 2022-12-09_13:50:24.994454) 13:50:28.463532 run osmo-hlr_10.42.42.2(pid=12788): stderr: | �[0;m�[1;31m20221209135025194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209135025194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209135025194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209135025194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209135025194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209135025194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209135025207 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209135025215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209135025215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209135025216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:50:28.507884 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12787): Terminating (SIGTERM) 13:50:28.550254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12790): Terminating (SIGTERM) 13:50:28.592515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12793): Terminating (SIGTERM) 13:50:28.602385 --- ParallelTerminationStrategy: PID 12787 died... 13:50:28.658898 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12787): Terminated: ok {rc=0} 13:50:28.669113 --- ParallelTerminationStrategy: PID 12790 died... 13:50:28.725559 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12790): Terminated: ok {rc=0} 13:50:28.735820 --- ParallelTerminationStrategy: PID 12793 died... 13:50:28.792406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12793): Terminated: ok {rc=0} 13:50:28.879323 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12791): Process ended prematurely: osmo-stp_10.42.42.5(pid=12791) [trial-2360↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12791)]