Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=13652): Process ended prematurely: osmo-stp_10.42.42.5(pid=13652) [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13652)]
Standard Output
---------------------------------------------- trial-2360 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 13:58:41.682359 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:41.693850 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 13:58:41.830665 tst cs_paging_gprs_active.py: using LAC 21938 13:58:41.947849 tst cs_paging_gprs_active.py: using RAC 8 13:58:42.070639 tst cs_paging_gprs_active.py: using CellId 21938 13:58:42.186650 tst cs_paging_gprs_active.py: using BVCI 21939 13:58:42.209740 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.221043 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.232051 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.243059 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.254046 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.264915 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.276010 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.286939 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:58:42.298178 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:58:42.416435 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:58:42.706710 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:58:42.839703 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:58:43.167905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13642): Launched 13:58:43.441021 run iperf3-srv_10.42.42.10(pid=13643): Launched 13:58:43.635502 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:58:43.768441 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:58:44.095734 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13644): Launched 13:58:44.369163 run iperf3-srv_10.42.42.10(pid=13645): Launched 13:58:44.563818 tst cs_paging_gprs_active.py:38: start network... 13:58:44.696537 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:58:45.198926 run create_hlr_db(pid=13646): Launched 13:58:45.382937 bus /gobi_6: Setting Powered False 13:58:46.458662 run create_hlr_db(pid=13646): Terminated: ok {rc=0} 13:58:46.923294 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13648): Launched 13:58:47.344263 run osmo-hlr_10.42.42.2(pid=13649): Launched 13:58:47.459873 run osmo-stp_10.42.42.5: Starting osmo-stp 13:58:48.013383 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13651): Launched 13:58:48.333113 run osmo-stp_10.42.42.5(pid=13652): Launched 13:58:48.448680 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:58:49.003034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13654): Launched 13:58:49.117258 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:58:49.394714 run patchelf(pid=13655): Launched 13:58:49.581317 run osmo-stp_10.42.42.5(pid=13652): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13652)] 13:58:49.717979 run osmo-stp_10.42.42.5(pid=13652): stdout: | (launched: 2022-12-09_13:58:48.176483) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:58:49.854934 run osmo-stp_10.42.42.5(pid=13652): stderr: | �[0;m�[38;5;43m20221209135848367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135848367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135848367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135848367 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135848368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135848368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135848368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:58:49.987283 run osmo-stp_10.42.42.5(pid=13652): stdout: | (launched: 2022-12-09_13:58:48.176483) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:58:50.118578 run osmo-stp_10.42.42.5(pid=13652): stderr: | �[0;m�[38;5;43m20221209135848367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135848367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135848367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135848367 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135848368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135848368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135848368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:58:50.271055 run patchelf(pid=13655): Terminating (SIGINT) 13:58:50.449376 run patchelf(pid=13655): Terminated: ok {rc=0} 13:58:50.482219 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13652): Process ended prematurely: osmo-stp_10.42.42.5(pid=13652) [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13652)] [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 13:58:50.492058 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:58:50.555765 run osmo-hlr_10.42.42.2(pid=13649): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13649)] 13:58:50.607446 run osmo-hlr_10.42.42.2(pid=13649): stdout: | (launched: 2022-12-09_13:58:47.079346) 13:58:50.659639 run osmo-hlr_10.42.42.2(pid=13649): stderr: | �[0;m�[1;31m20221209135847308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209135847308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209135847308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209135847308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209135847308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209135847308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209135847328 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209135847336 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209135847337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209135847337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:58:50.703859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13642): Terminating (SIGTERM) 13:58:50.745882 run iperf3-srv_10.42.42.10(pid=13643): Terminating (SIGTERM) 13:58:50.787924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13644): Terminating (SIGTERM) 13:58:50.830221 run iperf3-srv_10.42.42.10(pid=13645): Terminating (SIGTERM) 13:58:50.872030 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13648): Terminating (SIGTERM) 13:58:50.914125 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13651): Terminating (SIGTERM) 13:58:50.956220 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13654): Terminating (SIGTERM) 13:58:50.966085 --- ParallelTerminationStrategy: PID 13642 died... 13:58:51.023041 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13642): Terminated: ok {rc=0} 13:58:51.033254 --- ParallelTerminationStrategy: PID 13643 died... 13:58:51.089305 run iperf3-srv_10.42.42.10(pid=13643): Terminated {rc=256} 13:58:51.099345 --- ParallelTerminationStrategy: PID 13644 died... 13:58:51.155574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13644): Terminated: ok {rc=0} 13:58:51.165955 --- ParallelTerminationStrategy: PID 13645 died... 13:58:51.222060 run iperf3-srv_10.42.42.10(pid=13645): Terminated {rc=256} 13:58:51.232133 --- ParallelTerminationStrategy: PID 13648 died... 13:58:51.287956 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13648): Terminated: ok {rc=0} 13:58:51.298086 --- ParallelTerminationStrategy: PID 13651 died... 13:58:51.354148 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13651): Terminated: ok {rc=0} 13:58:51.364231 --- ParallelTerminationStrategy: PID 13654 died... 13:58:51.420122 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13654): Terminated: ok {rc=0} 13:58:51.506026 bus /gobi_0: Setting Powered False 13:58:52.613816 bus /gobi_0: Setting Powered False 13:58:53.726339 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13652): Process ended prematurely: osmo-stp_10.42.42.5(pid=13652) [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13652)]