Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7968): Process ended prematurely: osmo-stp_10.42.42.5(pid=7968) [trial-2360↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7968)]
Standard Output
---------------------------------------------- trial-2360 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:00:45.741797 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:45.753619 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:00:45.886917 tst cs_paging_gprs_active.py: using LAC 21631 13:00:46.018191 tst cs_paging_gprs_active.py: using RAC 211 13:00:46.150346 tst cs_paging_gprs_active.py: using CellId 21631 13:00:46.280369 tst cs_paging_gprs_active.py: using BVCI 21632 13:00:46.306449 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.318804 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.332731 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.345735 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.357963 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.369802 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.382525 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.395373 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:46.408426 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:00:46.561190 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:00:46.851547 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:00:46.985165 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:00:47.322186 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7958): Launched 13:00:47.585686 run iperf3-srv_10.42.42.10(pid=7959): Launched 13:00:47.771505 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:00:47.898816 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:00:48.214200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7960): Launched 13:00:48.476187 run iperf3-srv_10.42.42.10(pid=7961): Launched 13:00:48.662330 tst cs_paging_gprs_active.py:38: start network... 13:00:48.789848 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:00:49.280492 run create_hlr_db(pid=7962): Launched 13:00:49.455854 bus /gobi_6: Setting Powered False 13:00:50.477811 run create_hlr_db(pid=7962): Terminated: ok {rc=0} 13:00:50.909537 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7964): Launched 13:00:51.235720 run osmo-hlr_10.42.42.2(pid=7965): Launched 13:00:51.356304 run osmo-stp_10.42.42.5: Starting osmo-stp 13:00:51.920729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7967): Launched 13:00:52.245914 run osmo-stp_10.42.42.5(pid=7968): Launched 13:00:52.363817 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:00:52.932147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7970): Launched 13:00:53.048439 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:00:53.331019 run patchelf(pid=7971): Launched 13:00:53.521662 run osmo-stp_10.42.42.5(pid=7968): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7968)] 13:00:53.660691 run osmo-stp_10.42.42.5(pid=7968): stdout: | (launched: 2022-12-09_13:00:52.086688) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:00:53.799944 run osmo-stp_10.42.42.5(pid=7968): stderr: | �[0;m�[38;5;43m20221209130052276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130052276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130052277 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130052277 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130052277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130052278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130052278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:00:53.934735 run osmo-stp_10.42.42.5(pid=7968): stdout: | (launched: 2022-12-09_13:00:52.086688) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:00:54.068470 run osmo-stp_10.42.42.5(pid=7968): stderr: | �[0;m�[38;5;43m20221209130052276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130052276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130052277 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130052277 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130052277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130052278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130052278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:00:54.223180 run patchelf(pid=7971): Terminating (SIGINT) 13:00:54.404687 run patchelf(pid=7971): Terminated: ok {rc=0} 13:00:54.438208 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7968): Process ended prematurely: osmo-stp_10.42.42.5(pid=7968) [trial-2360↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7968)] [trial-2360↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:00:54.448146 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:00:54.512125 run osmo-hlr_10.42.42.2(pid=7965): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7965)] 13:00:54.564336 run osmo-hlr_10.42.42.2(pid=7965): stdout: | (launched: 2022-12-09_13:00:51.075406) 13:00:54.617270 run osmo-hlr_10.42.42.2(pid=7965): stderr: | �[0;m�[1;31m20221209130051270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209130051270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209130051270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209130051270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209130051270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209130051270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209130051282 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209130051291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209130051291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209130051291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:00:54.662304 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7958): Terminating (SIGTERM) 13:00:54.705310 run iperf3-srv_10.42.42.10(pid=7959): Terminating (SIGTERM) 13:00:54.747804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7960): Terminating (SIGTERM) 13:00:54.790509 run iperf3-srv_10.42.42.10(pid=7961): Terminating (SIGTERM) 13:00:54.833317 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7964): Terminating (SIGTERM) 13:00:54.875671 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7967): Terminating (SIGTERM) 13:00:54.918087 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7970): Terminating (SIGTERM) 13:00:54.927845 --- ParallelTerminationStrategy: PID 7958 died... 13:00:54.984548 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7958): Terminated: ok {rc=0} 13:00:54.994638 --- ParallelTerminationStrategy: PID 7959 died... 13:00:55.050709 run iperf3-srv_10.42.42.10(pid=7959): Terminated {rc=256} 13:00:55.060636 --- ParallelTerminationStrategy: PID 7960 died... 13:00:55.117020 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7960): Terminated: ok {rc=0} 13:00:55.127214 --- ParallelTerminationStrategy: PID 7961 died... 13:00:55.183550 run iperf3-srv_10.42.42.10(pid=7961): Terminated {rc=256} 13:00:55.193929 --- ParallelTerminationStrategy: PID 7964 died... 13:00:55.250248 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7964): Terminated: ok {rc=0} 13:00:55.260328 --- ParallelTerminationStrategy: PID 7967 died... 13:00:55.317078 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7967): Terminated: ok {rc=0} 13:00:55.327288 --- ParallelTerminationStrategy: PID 7970 died... 13:00:55.383908 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7970): Terminated: ok {rc=0} 13:00:55.472438 bus /gobi_0: Setting Powered False 13:00:56.580710 bus /gobi_0: Setting Powered False 13:00:57.693352 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7968): Process ended prematurely: osmo-stp_10.42.42.5(pid=7968) [trial-2360↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7968)]