Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7148): Process ended prematurely: osmo-stp_10.42.42.5(pid=7148) [trial-2360↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7148)]
Standard Output
---------------------------------------------- trial-2360 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 12:52:51.235137 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.245923 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 12:52:51.371807 tst cs_paging_gprs_active.py: using LAC 21589 12:52:51.495351 tst cs_paging_gprs_active.py: using RAC 169 12:52:51.618554 tst cs_paging_gprs_active.py: using CellId 21589 12:52:51.742487 tst cs_paging_gprs_active.py: using BVCI 21590 12:52:51.766347 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.777265 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.787788 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.798413 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.808934 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.819632 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.830416 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.840910 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:52:51.851683 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:52:51.971856 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:52:52.258186 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:52:52.387440 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:52:52.710987 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7138): Launched 12:52:52.979779 run iperf3-srv_10.42.42.10(pid=7139): Launched 12:52:53.170577 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:52:53.300064 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:52:53.625472 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Launched 12:52:53.896452 run iperf3-srv_10.42.42.10(pid=7141): Launched 12:52:54.086410 tst cs_paging_gprs_active.py:38: start network... 12:52:54.216436 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:52:54.718508 run create_hlr_db(pid=7142): Launched 12:52:54.897079 bus /gobi_6: Setting Powered False 12:52:55.919417 run create_hlr_db(pid=7142): Terminated: ok {rc=0} 12:52:56.365959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7144): Launched 12:52:56.703640 run osmo-hlr_10.42.42.2(pid=7145): Launched 12:52:56.828674 run osmo-stp_10.42.42.5: Starting osmo-stp 12:52:57.412086 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7147): Launched 12:52:57.748767 run osmo-stp_10.42.42.5(pid=7148): Launched 12:52:57.870730 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:52:58.453595 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7150): Launched 12:52:58.572823 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:52:58.864649 run patchelf(pid=7151): Launched 12:52:59.059453 run osmo-stp_10.42.42.5(pid=7148): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7148)] 12:52:59.201921 run osmo-stp_10.42.42.5(pid=7148): stdout: | (launched: 2022-12-09_12:52:57.581855) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:52:59.344527 run osmo-stp_10.42.42.5(pid=7148): stderr: | �[0;m�[38;5;43m20221209125257778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209125257778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209125257778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209125257779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209125257779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209125257779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209125257779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:52:59.482194 run osmo-stp_10.42.42.5(pid=7148): stdout: | (launched: 2022-12-09_12:52:57.581855) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:52:59.618683 run osmo-stp_10.42.42.5(pid=7148): stderr: | �[0;m�[38;5;43m20221209125257778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209125257778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209125257778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209125257779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209125257779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209125257779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209125257779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:52:59.777321 run patchelf(pid=7151): Terminating (SIGINT) 12:52:59.962610 run patchelf(pid=7151): Terminated: ok {rc=0} 12:52:59.996725 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7148): Process ended prematurely: osmo-stp_10.42.42.5(pid=7148) [trial-2360↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7148)] [trial-2360↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 12:53:00.006817 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 12:53:00.071524 run osmo-hlr_10.42.42.2(pid=7145): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7145)] 12:53:00.124198 run osmo-hlr_10.42.42.2(pid=7145): stdout: | (launched: 2022-12-09_12:52:56.536086) 12:53:00.177734 run osmo-hlr_10.42.42.2(pid=7145): stderr: | �[0;m�[1;31m20221209125256740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209125256740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209125256740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209125256740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209125256740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209125256740 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209125256757 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209125256767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209125256767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209125256767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:53:00.223424 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7138): Terminating (SIGTERM) 12:53:00.266302 run iperf3-srv_10.42.42.10(pid=7139): Terminating (SIGTERM) 12:53:00.309942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Terminating (SIGTERM) 12:53:00.352521 run iperf3-srv_10.42.42.10(pid=7141): Terminating (SIGTERM) 12:53:00.395799 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7144): Terminating (SIGTERM) 12:53:00.438798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7147): Terminating (SIGTERM) 12:53:00.482227 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7150): Terminating (SIGTERM) 12:53:00.492556 --- ParallelTerminationStrategy: PID 7138 died... 12:53:00.549123 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7138): Terminated: ok {rc=0} 12:53:00.559506 --- ParallelTerminationStrategy: PID 7139 died... 12:53:00.615725 run iperf3-srv_10.42.42.10(pid=7139): Terminated {rc=256} 12:53:00.625825 --- ParallelTerminationStrategy: PID 7140 died... 12:53:00.681924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Terminated: ok {rc=0} 12:53:00.691930 --- ParallelTerminationStrategy: PID 7141 died... 12:53:00.747655 run iperf3-srv_10.42.42.10(pid=7141): Terminated {rc=256} 12:53:00.757882 --- ParallelTerminationStrategy: PID 7144 died... 12:53:00.813496 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7144): Terminated: ok {rc=0} 12:53:00.823702 --- ParallelTerminationStrategy: PID 7147 died... 12:53:00.887741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7147): Terminated: ok {rc=0} 12:53:00.901773 --- ParallelTerminationStrategy: PID 7150 died... 12:53:00.959381 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7150): Terminated: ok {rc=0} 12:53:01.047601 bus /gobi_0: Setting Powered False 12:53:02.195805 bus /gobi_0: Setting Powered False 12:53:03.332164 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7148): Process ended prematurely: osmo-stp_10.42.42.5(pid=7148) [trial-2360↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7148)]