Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8909): Process ended prematurely: osmo-stp_10.42.42.5(pid=8909) [trial-2360↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8909)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:10:28.603680 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:28.615069 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:10:28.779887 tst cs_paging_gprs_active.py: using LAC 21682 13:10:28.907157 tst cs_paging_gprs_active.py: using RAC 7 13:10:29.028803 tst cs_paging_gprs_active.py: using CellId 21682 13:10:29.154918 tst cs_paging_gprs_active.py: using BVCI 21683 13:10:29.178614 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.189663 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.200486 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.211267 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.221827 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.232398 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.243544 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.254260 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:10:29.265162 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:10:29.380466 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:10:29.678809 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:10:29.817205 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:10:30.160443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8899): Launched 13:10:30.442939 run iperf3-srv_10.42.42.10(pid=8900): Launched 13:10:30.644084 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:10:30.781901 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:10:31.160553 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8901): Launched 13:10:31.450491 run iperf3-srv_10.42.42.10(pid=8902): Launched 13:10:31.645241 tst cs_paging_gprs_active.py:38: start network... 13:10:31.776619 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:10:32.292224 run create_hlr_db(pid=8903): Launched 13:10:32.482364 bus /gobi_6: Setting Powered False 13:10:33.502516 run create_hlr_db(pid=8903): Terminated: ok {rc=0} 13:10:33.914940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8905): Launched 13:10:34.222071 run osmo-hlr_10.42.42.2(pid=8906): Launched 13:10:34.343809 run osmo-stp_10.42.42.5: Starting osmo-stp 13:10:34.877784 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8908): Launched 13:10:35.184657 run osmo-stp_10.42.42.5(pid=8909): Launched 13:10:35.296009 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:10:35.831851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8911): Launched 13:10:35.941426 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:10:36.209357 run patchelf(pid=8912): Launched 13:10:36.388661 run osmo-stp_10.42.42.5(pid=8909): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8909)] 13:10:36.519914 run osmo-stp_10.42.42.5(pid=8909): stdout: | (launched: 2022-12-09_13:10:35.034121) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:10:36.651754 run osmo-stp_10.42.42.5(pid=8909): stderr: | �[0;m�[38;5;43m20221209131035201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209131035202 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209131035202 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209131035202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209131035203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209131035203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209131035203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:10:36.779357 run osmo-stp_10.42.42.5(pid=8909): stdout: | (launched: 2022-12-09_13:10:35.034121) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:10:36.905603 run osmo-stp_10.42.42.5(pid=8909): stderr: | �[0;m�[38;5;43m20221209131035201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209131035202 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209131035202 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209131035202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209131035203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209131035203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209131035203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:10:37.051731 run patchelf(pid=8912): Terminating (SIGINT) 13:10:37.223174 run patchelf(pid=8912): Terminated: ok {rc=0} 13:10:37.254780 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8909): Process ended prematurely: osmo-stp_10.42.42.5(pid=8909) [trial-2360↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8909)] [trial-2360↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:10:37.263825 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:10:37.323205 run osmo-hlr_10.42.42.2(pid=8906): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8906)] 13:10:37.372138 run osmo-hlr_10.42.42.2(pid=8906): stdout: | (launched: 2022-12-09_13:10:34.071108) 13:10:37.421653 run osmo-hlr_10.42.42.2(pid=8906): stderr: | �[0;m�[1;31m20221209131034247 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209131034247 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209131034247 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209131034247 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209131034247 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209131034247 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209131034259 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209131034267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209131034268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209131034268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:10:37.463614 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8899): Terminating (SIGTERM) 13:10:37.503203 run iperf3-srv_10.42.42.10(pid=8900): Terminating (SIGTERM) 13:10:37.542726 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8901): Terminating (SIGTERM) 13:10:37.582722 run iperf3-srv_10.42.42.10(pid=8902): Terminating (SIGTERM) 13:10:37.622185 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8905): Terminating (SIGTERM) 13:10:37.661567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8908): Terminating (SIGTERM) 13:10:37.701567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8911): Terminating (SIGTERM) 13:10:37.710739 --- ParallelTerminationStrategy: PID 8899 died... 13:10:37.764416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8899): Terminated: ok {rc=0} 13:10:37.773994 --- ParallelTerminationStrategy: PID 8900 died... 13:10:37.827098 run iperf3-srv_10.42.42.10(pid=8900): Terminated {rc=256} 13:10:37.836591 --- ParallelTerminationStrategy: PID 8901 died... 13:10:37.889853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8901): Terminated: ok {rc=0} 13:10:37.899413 --- ParallelTerminationStrategy: PID 8902 died... 13:10:37.952502 run iperf3-srv_10.42.42.10(pid=8902): Terminated {rc=256} 13:10:37.962011 --- ParallelTerminationStrategy: PID 8905 died... 13:10:38.015139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8905): Terminated: ok {rc=0} 13:10:38.024691 --- ParallelTerminationStrategy: PID 8908 died... 13:10:38.077855 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8908): Terminated: ok {rc=0} 13:10:38.087438 --- ParallelTerminationStrategy: PID 8911 died... 13:10:38.141355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8911): Terminated: ok {rc=0} 13:10:38.230206 bus /gobi_0: Setting Powered False 13:10:39.334471 bus /gobi_0: Setting Powered False 13:10:40.446596 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8909): Process ended prematurely: osmo-stp_10.42.42.5(pid=8909) [trial-2360↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8909)]