Failed
gprs:trx-b200.iperf3.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=8781): Process ended prematurely: osmo-stp_10.42.42.5(pid=8781) [trial-2360↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8781)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-b200 iperf3.py ---------------------------------------------- 13:08:40.597869 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:40.609839 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 13:08:40.761248 tst iperf3.py: using LAC 21673 13:08:40.891697 tst iperf3.py: using RAC 253 13:08:41.022502 tst iperf3.py: using CellId 21673 13:08:41.151600 tst iperf3.py: using BVCI 21674 13:08:41.176872 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.188090 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.199202 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.210470 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.221585 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.232615 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.243935 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.255421 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 13:08:41.266719 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 13:08:41.565688 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:08:41.704657 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:08:42.047096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8773): Launched 13:08:42.332083 run iperf3-srv_10.42.42.10(pid=8774): Launched 13:08:42.534985 tst iperf3.py:8: start network... 13:08:42.673993 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:08:43.194355 run create_hlr_db(pid=8775): Launched 13:08:43.386098 bus /gobi_6: Setting Powered False 13:08:44.405877 run create_hlr_db(pid=8775): Terminated: ok {rc=0} 13:08:44.824280 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8777): Launched 13:08:45.135576 run osmo-hlr_10.42.42.2(pid=8778): Launched 13:08:45.249938 run osmo-stp_10.42.42.5: Starting osmo-stp 13:08:45.791906 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8780): Launched 13:08:46.275749 run osmo-stp_10.42.42.5(pid=8781): Launched 13:08:46.492519 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:08:47.064866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8783): Launched 13:08:47.187213 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:08:47.479556 run patchelf(pid=8784): Launched 13:08:47.674216 run osmo-stp_10.42.42.5(pid=8781): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8781)] 13:08:47.816001 run osmo-stp_10.42.42.5(pid=8781): stdout: | (launched: 2022-12-09_13:08:45.971839) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:47.958046 run osmo-stp_10.42.42.5(pid=8781): stderr: | �[0;m�[38;5;43m20221209130846223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130846223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130846224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130846224 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130846225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130846225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130846225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:48.095308 run osmo-stp_10.42.42.5(pid=8781): stdout: | (launched: 2022-12-09_13:08:45.971839) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:48.231544 run osmo-stp_10.42.42.5(pid=8781): stderr: | �[0;m�[38;5;43m20221209130846223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130846223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130846224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130846224 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130846225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130846225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130846225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:48.389763 run patchelf(pid=8784): Terminating (SIGINT) 13:08:48.574300 run patchelf(pid=8784): Terminated: ok {rc=0} 13:08:48.608409 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8781): Process ended prematurely: osmo-stp_10.42.42.5(pid=8781) [trial-2360↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8781)] [trial-2360↪gprs:trx-b200↪iperf3.py:8] 13:08:48.618297 tst iperf3.py:8: Test FAILED (8.1 sec) 13:08:48.682890 run osmo-hlr_10.42.42.2(pid=8778): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8778)] 13:08:48.735057 run osmo-hlr_10.42.42.2(pid=8778): stdout: | (launched: 2022-12-09_13:08:44.982322) 13:08:48.788156 run osmo-hlr_10.42.42.2(pid=8778): stderr: | �[0;m�[1;31m20221209130845158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209130845158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209130845159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209130845159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209130845159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209130845159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209130845171 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209130845179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209130845180 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209130845180 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:08:48.833168 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8773): Terminating (SIGTERM) 13:08:48.876015 run iperf3-srv_10.42.42.10(pid=8774): Terminating (SIGTERM) 13:08:48.919035 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8777): Terminating (SIGTERM) 13:08:48.961633 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8780): Terminating (SIGTERM) 13:08:49.004020 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8783): Terminating (SIGTERM) 13:08:49.014071 --- ParallelTerminationStrategy: PID 8773 died... 13:08:49.071037 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8773): Terminated: ok {rc=0} 13:08:49.081314 --- ParallelTerminationStrategy: PID 8774 died... 13:08:49.138969 run iperf3-srv_10.42.42.10(pid=8774): Terminated {rc=256} 13:08:49.149210 --- ParallelTerminationStrategy: PID 8777 died... 13:08:49.206074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8777): Terminated: ok {rc=0} 13:08:49.216529 --- ParallelTerminationStrategy: PID 8780 died... 13:08:49.273726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8780): Terminated: ok {rc=0} 13:08:49.283871 --- ParallelTerminationStrategy: PID 8783 died... 13:08:49.341124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8783): Terminated: ok {rc=0} 13:08:49.431137 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8781): Process ended prematurely: osmo-stp_10.42.42.5(pid=8781) [trial-2360↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8781)]