Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10424): Process ended prematurely: osmo-stp_10.42.42.5(pid=10424) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10424)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-umtrx+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 13:28:30.602521 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:30.614539 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:28:30.773917 tst ping_idle_ping.py: using LAC 21777 13:28:30.919583 tst ping_idle_ping.py: using RAC 102 13:28:31.046714 tst ping_idle_ping.py: using CellId 21777 13:28:31.167040 tst ping_idle_ping.py: using BVCI 21778 13:28:31.190447 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:31.201816 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:31.213200 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:31.225336 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:31.237198 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:31.249462 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:31.260786 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:28:31.272602 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:28:31.580571 tst ping_idle_ping.py:24: start network... 13:28:31.716306 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:28:32.252107 run create_hlr_db(pid=10418): Launched 13:28:32.435200 bus /gobi_6: Setting Powered False 13:28:33.455302 run create_hlr_db(pid=10418): Terminated: ok {rc=0} 13:28:33.872372 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10420): Launched 13:28:34.184616 run osmo-hlr_10.42.42.2(pid=10421): Launched 13:28:34.303202 run osmo-stp_10.42.42.5: Starting osmo-stp 13:28:34.844915 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10423): Launched 13:28:35.158331 run osmo-stp_10.42.42.5(pid=10424): Launched 13:28:35.271734 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:28:35.816003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10426): Launched 13:28:35.927649 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:28:36.199653 run patchelf(pid=10427): Launched 13:28:36.383690 run osmo-stp_10.42.42.5(pid=10424): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10424)] 13:28:36.518520 run osmo-stp_10.42.42.5(pid=10424): stdout: | (launched: 2022-12-09_13:28:35.005163) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:28:36.653327 run osmo-stp_10.42.42.5(pid=10424): stderr: | �[0;m�[38;5;43m20221209132835194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132835194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132835194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132835195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132835195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132835195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132835195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:28:36.783713 run osmo-stp_10.42.42.5(pid=10424): stdout: | (launched: 2022-12-09_13:28:35.005163) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:28:36.912437 run osmo-stp_10.42.42.5(pid=10424): stderr: | �[0;m�[38;5;43m20221209132835194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132835194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132835194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132835195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132835195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132835195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132835195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:28:37.062273 run patchelf(pid=10427): Terminating (SIGINT) 13:28:37.237864 run patchelf(pid=10427): Terminated: ok {rc=0} 13:28:37.270484 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10424): Process ended prematurely: osmo-stp_10.42.42.5(pid=10424) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10424)] [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 13:28:37.279734 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 13:28:37.343364 run osmo-hlr_10.42.42.2(pid=10421): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10421)] 13:28:37.395142 run osmo-hlr_10.42.42.2(pid=10421): stdout: | (launched: 2022-12-09_13:28:34.031329) 13:28:37.447409 run osmo-hlr_10.42.42.2(pid=10421): stderr: | �[0;m�[1;31m20221209132834228 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132834228 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132834229 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132834229 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132834229 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132834229 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132834241 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132834249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132834250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132834250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:28:37.491615 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10420): Terminating (SIGTERM) 13:28:37.533690 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10423): Terminating (SIGTERM) 13:28:37.575869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10426): Terminating (SIGTERM) 13:28:37.585912 --- ParallelTerminationStrategy: PID 10420 died... 13:28:37.641755 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10420): Terminated: ok {rc=0} 13:28:37.652566 --- ParallelTerminationStrategy: PID 10423 died... 13:28:37.707725 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10423): Terminated: ok {rc=0} 13:28:37.717839 --- ParallelTerminationStrategy: PID 10426 died... 13:28:37.773259 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10426): Terminated: ok {rc=0} 13:28:37.859824 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10424): Process ended prematurely: osmo-stp_10.42.42.5(pid=10424) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10424)]