Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=32747): Process ended prematurely: osmo-stp_10.42.42.5(pid=32747) [trial-2362↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32747)]
Standard Output
---------------------------------------------- trial-2362 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 18:19:50.631758 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:50.642369 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 18:19:50.775077 tst cs_paging_gprs_active.py: using LAC 22845 18:19:50.894182 tst cs_paging_gprs_active.py: using RAC 150 18:19:51.010705 tst cs_paging_gprs_active.py: using CellId 22845 18:19:51.127469 tst cs_paging_gprs_active.py: using BVCI 22846 18:19:51.150298 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.160778 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.171545 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.182336 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.192838 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.203448 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.214169 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.224558 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:19:51.235248 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:19:51.354084 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:19:51.645769 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:19:51.778394 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:19:52.108033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32737): Launched 18:19:52.382547 run iperf3-srv_10.42.42.10(pid=32738): Launched 18:19:52.578055 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:19:52.710655 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:19:53.042797 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32739): Launched 18:19:53.317521 run iperf3-srv_10.42.42.10(pid=32740): Launched 18:19:53.513608 tst cs_paging_gprs_active.py:38: start network... 18:19:53.647072 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:19:54.158783 run create_hlr_db(pid=32741): Launched 18:19:54.343128 bus /sierra_2: Setting Powered False 18:19:55.364106 run create_hlr_db(pid=32741): Terminated: ok {rc=0} 18:19:55.764662 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32743): Launched 18:19:56.072384 run osmo-hlr_10.42.42.2(pid=32744): Launched 18:19:56.196261 run osmo-stp_10.42.42.5: Starting osmo-stp 18:19:56.721307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32746): Launched 18:19:57.020063 run osmo-stp_10.42.42.5(pid=32747): Launched 18:19:57.129409 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:19:57.650010 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32749): Launched 18:19:57.756328 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:19:58.017162 run patchelf(pid=32750): Launched 18:19:58.192587 run osmo-stp_10.42.42.5(pid=32747): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32747)] 18:19:58.320400 run osmo-stp_10.42.42.5(pid=32747): stdout: | (launched: 2022-12-09_18:19:56.872488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:19:58.448256 run osmo-stp_10.42.42.5(pid=32747): stderr: | �[0;m�[38;5;43m20221209181957041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209181957041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209181957042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209181957042 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209181957044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209181957044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209181957044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:19:58.571715 run osmo-stp_10.42.42.5(pid=32747): stdout: | (launched: 2022-12-09_18:19:56.872488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:19:58.693744 run osmo-stp_10.42.42.5(pid=32747): stderr: | �[0;m�[38;5;43m20221209181957041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209181957041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209181957042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209181957042 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209181957044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209181957044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209181957044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:19:58.836846 run patchelf(pid=32750): Terminating (SIGINT) 18:19:59.006341 run patchelf(pid=32750): Terminated: ok {rc=0} 18:19:59.037401 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32747): Process ended prematurely: osmo-stp_10.42.42.5(pid=32747) [trial-2362↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32747)] [trial-2362↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 18:19:59.046580 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 18:19:59.106865 run osmo-hlr_10.42.42.2(pid=32744): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32744)] 18:19:59.155773 run osmo-hlr_10.42.42.2(pid=32744): stdout: | (launched: 2022-12-09_18:19:55.916271) 18:19:59.205335 run osmo-hlr_10.42.42.2(pid=32744): stderr: | �[0;m�[1;31m20221209181956093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209181956093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209181956093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209181956093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209181956093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209181956093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209181956105 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209181956114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209181956114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209181956114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:19:59.247083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32737): Terminating (SIGTERM) 18:19:59.286443 run iperf3-srv_10.42.42.10(pid=32738): Terminating (SIGTERM) 18:19:59.326063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32739): Terminating (SIGTERM) 18:19:59.365594 run iperf3-srv_10.42.42.10(pid=32740): Terminating (SIGTERM) 18:19:59.405242 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32743): Terminating (SIGTERM) 18:19:59.444798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32746): Terminating (SIGTERM) 18:19:59.484612 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32749): Terminating (SIGTERM) 18:19:59.494096 --- ParallelTerminationStrategy: PID 32737 died... 18:19:59.552058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32737): Terminated: ok {rc=0} 18:19:59.562282 --- ParallelTerminationStrategy: PID 32738 died... 18:19:59.618465 run iperf3-srv_10.42.42.10(pid=32738): Terminated {rc=256} 18:19:59.628618 --- ParallelTerminationStrategy: PID 32739 died... 18:19:59.684227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32739): Terminated: ok {rc=0} 18:19:59.694840 --- ParallelTerminationStrategy: PID 32740 died... 18:19:59.750408 run iperf3-srv_10.42.42.10(pid=32740): Terminated {rc=256} 18:19:59.761084 --- ParallelTerminationStrategy: PID 32743 died... 18:19:59.816633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32743): Terminated: ok {rc=0} 18:19:59.826634 --- ParallelTerminationStrategy: PID 32746 died... 18:19:59.881854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32746): Terminated: ok {rc=0} 18:19:59.891909 --- ParallelTerminationStrategy: PID 32749 died... 18:19:59.947015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32749): Terminated: ok {rc=0} 18:20:00.031594 bus /gobi_0: Setting Powered False 18:20:01.149106 bus /gobi_0: Setting Powered False 18:20:02.256588 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32747): Process ended prematurely: osmo-stp_10.42.42.5(pid=32747) [trial-2362↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32747)]