Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28129): Process ended prematurely: osmo-stp_10.42.42.5(pid=28129) [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28129)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 17:34:23.032914 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.045059 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:34:23.193296 tst ping_idle_ping.py: using LAC 22603 17:34:23.321101 tst ping_idle_ping.py: using RAC 163 17:34:23.449179 tst ping_idle_ping.py: using CellId 22603 17:34:23.575252 tst ping_idle_ping.py: using BVCI 22604 17:34:23.599850 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.611258 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.622451 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.634213 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.645913 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.657729 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.669578 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:34:23.681188 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:34:23.960837 tst ping_idle_ping.py:24: start network... 17:34:24.086682 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:34:24.566046 run create_hlr_db(pid=28123): Launched 17:34:24.741068 bus /gobi_6: Setting Powered False 17:34:25.761938 run create_hlr_db(pid=28123): Terminated: ok {rc=0} 17:34:26.191671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28125): Launched 17:34:26.514094 run osmo-hlr_10.42.42.2(pid=28126): Launched 17:34:26.631353 run osmo-stp_10.42.42.5: Starting osmo-stp 17:34:27.192134 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28128): Launched 17:34:27.517352 run osmo-stp_10.42.42.5(pid=28129): Launched 17:34:27.633913 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:34:28.199214 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28131): Launched 17:34:28.314284 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:34:28.596043 run patchelf(pid=28132): Launched 17:34:28.785494 run osmo-stp_10.42.42.5(pid=28129): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28129)] 17:34:28.924057 run osmo-stp_10.42.42.5(pid=28129): stdout: | (launched: 2022-12-09_17:34:27.356062) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:34:29.062984 run osmo-stp_10.42.42.5(pid=28129): stderr: | �[0;m�[38;5;43m20221209173427547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173427547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173427547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173427548 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173427550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173427550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173427550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:34:29.196733 run osmo-stp_10.42.42.5(pid=28129): stdout: | (launched: 2022-12-09_17:34:27.356062) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:34:29.329195 run osmo-stp_10.42.42.5(pid=28129): stderr: | �[0;m�[38;5;43m20221209173427547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173427547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173427547 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173427548 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173427550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173427550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173427550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:34:29.483310 run patchelf(pid=28132): Terminating (SIGINT) 17:34:29.664595 run patchelf(pid=28132): Terminated: ok {rc=0} 17:34:29.697642 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28129): Process ended prematurely: osmo-stp_10.42.42.5(pid=28129) [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28129)] [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 17:34:29.707149 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 17:34:29.771181 run osmo-hlr_10.42.42.2(pid=28126): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28126)] 17:34:29.823270 run osmo-hlr_10.42.42.2(pid=28126): stdout: | (launched: 2022-12-09_17:34:26.355363) 17:34:29.875916 run osmo-hlr_10.42.42.2(pid=28126): stderr: | �[0;m�[1;31m20221209173426553 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209173426553 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209173426553 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209173426553 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209173426553 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209173426553 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209173426565 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209173426573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209173426573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209173426573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:34:29.921005 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28125): Terminating (SIGTERM) 17:34:29.963497 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28128): Terminating (SIGTERM) 17:34:30.006097 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28131): Terminating (SIGTERM) 17:34:30.015969 --- ParallelTerminationStrategy: PID 28125 died... 17:34:30.072863 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28125): Terminated: ok {rc=0} 17:34:30.083308 --- ParallelTerminationStrategy: PID 28128 died... 17:34:30.139868 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28128): Terminated: ok {rc=0} 17:34:30.150036 --- ParallelTerminationStrategy: PID 28131 died... 17:34:30.206491 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28131): Terminated: ok {rc=0} 17:34:30.294537 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28129): Process ended prematurely: osmo-stp_10.42.42.5(pid=28129) [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28129)]