Failed
gprs:oc2g.ping.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=10882): Process ended prematurely: osmo-stp_10.42.42.5(pid=10882) [trial-2364↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10882)]
Standard Output
---------------------------------------------- trial-2364 gprs:oc2g ping.py ---------------------------------------------- 20:19:12.186152 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.197142 tst gprs:oc2g: Using 1 x bts (candidates: 1) 20:19:12.319670 tst ping.py: using LAC 23473 20:19:12.445390 tst ping.py: using RAC 13 20:19:12.574603 tst ping.py: using CellId 23473 20:19:12.703027 tst ping.py: using BVCI 23474 20:19:12.728255 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.739466 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.750558 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.761370 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.772024 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.782737 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.793984 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:19:12.804753 tst gprs:oc2g: Using 1 x modem (candidates: 4) 20:19:13.082740 tst ping.py:19: start network... 20:19:13.209499 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:19:13.685439 run create_hlr_db(pid=10876): Launched 20:19:13.859503 bus /gobi_6: Setting Powered False 20:19:14.880903 run create_hlr_db(pid=10876): Terminated: ok {rc=0} 20:19:15.285135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10878): Launched 20:19:15.590115 run osmo-hlr_10.42.42.2(pid=10879): Launched 20:19:15.707320 run osmo-stp_10.42.42.5: Starting osmo-stp 20:19:16.268578 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10881): Launched 20:19:16.696630 run osmo-stp_10.42.42.5(pid=10882): Launched 20:19:16.973635 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:19:17.558279 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10884): Launched 20:19:17.666054 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:19:17.930624 run patchelf(pid=10885): Launched 20:19:18.107108 run osmo-stp_10.42.42.5(pid=10882): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10882)] 20:19:18.236169 run osmo-stp_10.42.42.5(pid=10882): stdout: | (launched: 2022-12-09_20:19:16.425171) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:19:18.366050 run osmo-stp_10.42.42.5(pid=10882): stderr: | �[0;m�[38;5;43m20221209201916835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201916835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201916836 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201916838 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201916843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201916844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201916844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:19:18.491357 run osmo-stp_10.42.42.5(pid=10882): stdout: | (launched: 2022-12-09_20:19:16.425171) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:19:18.615317 run osmo-stp_10.42.42.5(pid=10882): stderr: | �[0;m�[38;5;43m20221209201916835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201916835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201916836 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201916838 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201916843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201916844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201916844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:19:18.759625 run patchelf(pid=10885): Terminating (SIGINT) 20:19:18.929931 run patchelf(pid=10885): Terminated: ok {rc=0} 20:19:18.960827 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10882): Process ended prematurely: osmo-stp_10.42.42.5(pid=10882) [trial-2364↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10882)] [trial-2364↪gprs:oc2g↪ping.py:22] 20:19:18.969656 tst ping.py:22: Test FAILED (6.8 sec) 20:19:19.030847 run osmo-hlr_10.42.42.2(pid=10879): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:oc2g↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10879)] 20:19:19.080369 run osmo-hlr_10.42.42.2(pid=10879): stdout: | (launched: 2022-12-09_20:19:15.438322) 20:19:19.130814 run osmo-hlr_10.42.42.2(pid=10879): stderr: | �[0;m�[1;31m20221209201915615 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209201915615 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209201915615 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209201915615 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209201915615 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209201915615 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209201915627 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:oc2g/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209201915636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209201915636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209201915636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:19:19.173165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10878): Terminating (SIGTERM) 20:19:19.213373 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10881): Terminating (SIGTERM) 20:19:19.253481 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10884): Terminating (SIGTERM) 20:19:19.263071 --- ParallelTerminationStrategy: PID 10878 died... 20:19:19.316655 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10878): Terminated: ok {rc=0} 20:19:19.326636 --- ParallelTerminationStrategy: PID 10881 died... 20:19:19.380013 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10881): Terminated: ok {rc=0} 20:19:19.389960 --- ParallelTerminationStrategy: PID 10884 died... 20:19:19.443659 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10884): Terminated: ok {rc=0} 20:19:19.527576 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10882): Process ended prematurely: osmo-stp_10.42.42.5(pid=10882) [trial-2364↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10882)]