Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11821): Process ended prematurely: osmo-stp_10.42.42.5(pid=11821) [trial-2364↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11821)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:28:09.376729 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:09.388108 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:28:09.533235 tst cs_paging_gprs_active.py: using LAC 23521 20:28:09.662904 tst cs_paging_gprs_active.py: using RAC 61 20:28:09.793153 tst cs_paging_gprs_active.py: using CellId 23521 20:28:09.921837 tst cs_paging_gprs_active.py: using BVCI 23522 20:28:09.947163 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:09.958642 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:09.970016 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:09.981531 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:09.992764 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:10.003929 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:10.015440 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:10.026902 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:10.038452 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:28:10.155740 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:28:10.438205 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:28:10.566728 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:28:10.885131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11811): Launched 20:28:11.148875 run iperf3-srv_10.42.42.10(pid=11812): Launched 20:28:11.336175 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:28:11.464080 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:28:11.781899 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11813): Launched 20:28:12.046578 run iperf3-srv_10.42.42.10(pid=11814): Launched 20:28:12.234822 tst cs_paging_gprs_active.py:38: start network... 20:28:12.363313 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:28:12.854563 run create_hlr_db(pid=11815): Launched 20:28:13.030962 bus /gobi_6: Setting Powered False 20:28:14.052643 run create_hlr_db(pid=11815): Terminated: ok {rc=0} 20:28:14.487640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11817): Launched 20:28:14.817862 run osmo-hlr_10.42.42.2(pid=11818): Launched 20:28:14.938155 run osmo-stp_10.42.42.5: Starting osmo-stp 20:28:15.507705 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11820): Launched 20:28:15.862667 run osmo-stp_10.42.42.5(pid=11821): Launched 20:28:16.059279 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:28:16.623003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11823): Launched 20:28:16.738264 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:28:17.031757 run patchelf(pid=11824): Launched 20:28:17.219644 run osmo-stp_10.42.42.5(pid=11821): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11821)] 20:28:17.352110 run osmo-stp_10.42.42.5(pid=11821): stdout: | (launched: 2022-12-09_20:28:15.675400) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:28:17.485238 run osmo-stp_10.42.42.5(pid=11821): stderr: | �[0;m�[38;5;43m20221209202815877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202815878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202815878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202815878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202815879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202815879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202815879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:28:17.613278 run osmo-stp_10.42.42.5(pid=11821): stdout: | (launched: 2022-12-09_20:28:15.675400) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:28:17.739959 run osmo-stp_10.42.42.5(pid=11821): stderr: | �[0;m�[38;5;43m20221209202815877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202815878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202815878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202815878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202815879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202815879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202815879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:28:17.887269 run patchelf(pid=11824): Terminating (SIGINT) 20:28:18.059985 run patchelf(pid=11824): Terminated: ok {rc=0} 20:28:18.091865 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11821): Process ended prematurely: osmo-stp_10.42.42.5(pid=11821) [trial-2364↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11821)] [trial-2364↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:28:18.101391 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 20:28:18.162498 run osmo-hlr_10.42.42.2(pid=11818): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11818)] 20:28:18.211983 run osmo-hlr_10.42.42.2(pid=11818): stdout: | (launched: 2022-12-09_20:28:14.655620) 20:28:18.262088 run osmo-hlr_10.42.42.2(pid=11818): stderr: | �[0;m�[1;31m20221209202814856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202814856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202814856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202814856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202814856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202814856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202814868 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202814876 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202814877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202814877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:28:18.304373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11811): Terminating (SIGTERM) 20:28:18.344203 run iperf3-srv_10.42.42.10(pid=11812): Terminating (SIGTERM) 20:28:18.384159 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11813): Terminating (SIGTERM) 20:28:18.424205 run iperf3-srv_10.42.42.10(pid=11814): Terminating (SIGTERM) 20:28:18.464098 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11817): Terminating (SIGTERM) 20:28:18.503826 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11820): Terminating (SIGTERM) 20:28:18.543667 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11823): Terminating (SIGTERM) 20:28:18.553251 --- ParallelTerminationStrategy: PID 11811 died... 20:28:18.606440 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11811): Terminated: ok {rc=0} 20:28:18.616238 --- ParallelTerminationStrategy: PID 11812 died... 20:28:18.669289 run iperf3-srv_10.42.42.10(pid=11812): Terminated {rc=256} 20:28:18.678727 --- ParallelTerminationStrategy: PID 11813 died... 20:28:18.731483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11813): Terminated: ok {rc=0} 20:28:18.741121 --- ParallelTerminationStrategy: PID 11814 died... 20:28:18.793677 run iperf3-srv_10.42.42.10(pid=11814): Terminated {rc=256} 20:28:18.803308 --- ParallelTerminationStrategy: PID 11817 died... 20:28:18.856260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11817): Terminated: ok {rc=0} 20:28:18.866011 --- ParallelTerminationStrategy: PID 11820 died... 20:28:18.919116 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11820): Terminated: ok {rc=0} 20:28:18.928872 --- ParallelTerminationStrategy: PID 11823 died... 20:28:18.982349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11823): Terminated: ok {rc=0} 20:28:19.070212 bus /gobi_0: Setting Powered False 20:28:20.173486 bus /gobi_0: Setting Powered False 20:28:21.283585 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11821): Process ended prematurely: osmo-stp_10.42.42.5(pid=11821) [trial-2364↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11821)]