Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11794): Process ended prematurely: osmo-stp_10.42.42.5(pid=11794) [trial-2364↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11794)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200 ping.py ---------------------------------------------- 20:27:51.823861 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:51.835091 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 20:27:51.996409 tst ping.py: using LAC 23519 20:27:52.113395 tst ping.py: using RAC 59 20:27:52.230006 tst ping.py: using CellId 23519 20:27:52.347392 tst ping.py: using BVCI 23520 20:27:52.370438 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:52.380933 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:52.391377 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:52.402220 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:52.412868 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:52.423402 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:52.434159 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:52.444796 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:27:52.720312 tst ping.py:19: start network... 20:27:52.845554 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:27:53.318954 run create_hlr_db(pid=11788): Launched 20:27:53.491818 bus /gobi_6: Setting Powered False 20:27:54.514025 run create_hlr_db(pid=11788): Terminated: ok {rc=0} 20:27:54.943768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11790): Launched 20:27:55.267299 run osmo-hlr_10.42.42.2(pid=11791): Launched 20:27:55.390092 run osmo-stp_10.42.42.5: Starting osmo-stp 20:27:55.953899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11793): Launched 20:27:56.279131 run osmo-stp_10.42.42.5(pid=11794): Launched 20:27:56.396876 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:27:56.962041 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11796): Launched 20:27:57.077051 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:27:57.359627 run patchelf(pid=11797): Launched 20:27:57.548384 run osmo-stp_10.42.42.5(pid=11794): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11794)] 20:27:57.686797 run osmo-stp_10.42.42.5(pid=11794): stdout: | (launched: 2022-12-09_20:27:56.118681) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:27:57.825784 run osmo-stp_10.42.42.5(pid=11794): stderr: | �[0;m�[38;5;43m20221209202756311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202756311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202756311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202756312 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202756312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202756312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202756312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:27:57.960051 run osmo-stp_10.42.42.5(pid=11794): stdout: | (launched: 2022-12-09_20:27:56.118681) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:27:58.092743 run osmo-stp_10.42.42.5(pid=11794): stderr: | �[0;m�[38;5;43m20221209202756311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202756311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202756311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202756312 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202756312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202756312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202756312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:27:58.246349 run patchelf(pid=11797): Terminating (SIGINT) 20:27:58.426755 run patchelf(pid=11797): Terminated: ok {rc=0} 20:27:58.459649 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=11794): Process ended prematurely: osmo-stp_10.42.42.5(pid=11794) [trial-2364↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11794)] [trial-2364↪gprs:trx-b200↪ping.py:22] 20:27:58.469126 tst ping.py:22: Test FAILED (6.6 sec) 20:27:58.532398 run osmo-hlr_10.42.42.2(pid=11791): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11791)] 20:27:58.584526 run osmo-hlr_10.42.42.2(pid=11791): stdout: | (launched: 2022-12-09_20:27:55.108694) 20:27:58.637081 run osmo-hlr_10.42.42.2(pid=11791): stderr: | �[0;m�[1;31m20221209202755309 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202755309 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202755309 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202755309 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202755309 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202755309 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202755322 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202755330 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202755330 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202755330 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:27:58.681939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11790): Terminating (SIGTERM) 20:27:58.724001 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11793): Terminating (SIGTERM) 20:27:58.766402 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11796): Terminating (SIGTERM) 20:27:58.776357 --- ParallelTerminationStrategy: PID 11790 died... 20:27:58.832702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11790): Terminated: ok {rc=0} 20:27:58.843216 --- ParallelTerminationStrategy: PID 11793 died... 20:27:58.899491 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11793): Terminated: ok {rc=0} 20:27:58.909819 --- ParallelTerminationStrategy: PID 11796 died... 20:27:58.966374 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11796): Terminated: ok {rc=0} 20:27:59.052853 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11794): Process ended prematurely: osmo-stp_10.42.42.5(pid=11794) [trial-2364↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11794)]