Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=14110): Process ended prematurely: osmo-stp_10.42.42.5(pid=14110) [trial-2364↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14110)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 20:53:07.511992 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:07.523642 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 20:53:07.665366 tst cs_paging_gprs_active.py: using LAC 23654 20:53:07.819260 tst cs_paging_gprs_active.py: using RAC 194 20:53:07.958107 tst cs_paging_gprs_active.py: using CellId 23654 20:53:08.114978 tst cs_paging_gprs_active.py: using BVCI 23655 20:53:08.153902 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.170018 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.186960 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.209484 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.223378 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.239412 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.255760 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.271326 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:53:08.285232 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 20:53:08.422353 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 20:53:08.804161 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:53:08.964283 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:53:09.375096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13962): Launched 20:53:09.730666 run iperf3-srv_10.42.42.10(pid=14012): Launched 20:53:09.974001 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:53:10.137365 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:53:10.559379 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14101): Launched 20:53:10.852304 run iperf3-srv_10.42.42.10(pid=14103): Launched 20:53:11.045805 tst cs_paging_gprs_active.py:38: start network... 20:53:11.178044 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:53:11.721111 run create_hlr_db(pid=14104): Launched 20:53:11.907967 bus /sierra_2: Setting Powered False 20:53:12.926712 run create_hlr_db(pid=14104): Terminated: ok {rc=0} 20:53:13.358377 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14106): Launched 20:53:13.766958 run osmo-hlr_10.42.42.2(pid=14107): Launched 20:53:13.995118 run osmo-stp_10.42.42.5: Starting osmo-stp 20:53:14.651742 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14109): Launched 20:53:15.067272 run osmo-stp_10.42.42.5(pid=14110): Launched 20:53:15.306804 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:53:15.943173 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14112): Launched 20:53:16.066580 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:53:16.407694 run patchelf(pid=14113): Launched 20:53:16.648679 run osmo-stp_10.42.42.5(pid=14110): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14110)] 20:53:16.819651 run osmo-stp_10.42.42.5(pid=14110): stdout: | (launched: 2022-12-09_20:53:14.813426) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:53:16.989117 run osmo-stp_10.42.42.5(pid=14110): stderr: | �[0;m�[38;5;43m20221209205315136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205315141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205315141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205315142 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205315142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205315142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205315142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:53:17.148077 run osmo-stp_10.42.42.5(pid=14110): stdout: | (launched: 2022-12-09_20:53:14.813426) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:53:17.310971 run osmo-stp_10.42.42.5(pid=14110): stderr: | �[0;m�[38;5;43m20221209205315136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205315141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205315141 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205315142 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205315142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205315142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205315142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:53:17.496522 run patchelf(pid=14113): Terminating (SIGINT) 20:53:17.717908 run patchelf(pid=14113): Terminated: ok {rc=0} 20:53:17.761669 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14110): Process ended prematurely: osmo-stp_10.42.42.5(pid=14110) [trial-2364↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14110)] [trial-2364↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 20:53:17.775634 tst cs_paging_gprs_active.py:38: Test FAILED (10.3 sec) 20:53:17.850420 run osmo-hlr_10.42.42.2(pid=14107): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14107)] 20:53:17.913757 run osmo-hlr_10.42.42.2(pid=14107): stdout: | (launched: 2022-12-09_20:53:13.517580) 20:53:17.974636 run osmo-hlr_10.42.42.2(pid=14107): stderr: | �[0;m�[1;31m20221209205313861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209205313861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209205313861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209205313861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209205313861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209205313861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209205313884 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209205313898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209205313898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209205313899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:53:18.026487 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13962): Terminating (SIGTERM) 20:53:18.074422 run iperf3-srv_10.42.42.10(pid=14012): Terminating (SIGTERM) 20:53:18.127611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14101): Terminating (SIGTERM) 20:53:18.180399 run iperf3-srv_10.42.42.10(pid=14103): Terminating (SIGTERM) 20:53:18.232776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14106): Terminating (SIGTERM) 20:53:18.283694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14109): Terminating (SIGTERM) 20:53:18.327289 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14112): Terminating (SIGTERM) 20:53:18.338350 --- ParallelTerminationStrategy: PID 13962 died... 20:53:18.395639 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13962): Terminated: ok {rc=0} 20:53:18.406219 --- ParallelTerminationStrategy: PID 14012 died... 20:53:18.462328 run iperf3-srv_10.42.42.10(pid=14012): Terminated {rc=256} 20:53:18.472655 --- ParallelTerminationStrategy: PID 14101 died... 20:53:18.529070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14101): Terminated: ok {rc=0} 20:53:18.539478 --- ParallelTerminationStrategy: PID 14103 died... 20:53:18.595476 run iperf3-srv_10.42.42.10(pid=14103): Terminated {rc=256} 20:53:18.605933 --- ParallelTerminationStrategy: PID 14106 died... 20:53:18.662324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14106): Terminated: ok {rc=0} 20:53:18.672721 --- ParallelTerminationStrategy: PID 14109 died... 20:53:18.729612 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14109): Terminated: ok {rc=0} 20:53:18.740019 --- ParallelTerminationStrategy: PID 14112 died... 20:53:18.796519 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14112): Terminated: ok {rc=0} 20:53:18.888392 bus /gobi_0: Setting Powered False 20:53:19.998713 bus /gobi_0: Setting Powered False 20:53:21.111810 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14110): Process ended prematurely: osmo-stp_10.42.42.5(pid=14110) [trial-2364↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14110)]