Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=25782): Process ended prematurely: osmo-stp_10.42.42.5(pid=25782) [trial-2365↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25782)]
Standard Output
---------------------------------------------- trial-2365 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 22:47:49.838054 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:49.849003 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 22:47:49.978976 tst cs_paging_gprs_active.py: using LAC 24195 22:47:50.106916 tst cs_paging_gprs_active.py: using RAC 225 22:47:50.225370 tst cs_paging_gprs_active.py: using CellId 24195 22:47:50.343236 tst cs_paging_gprs_active.py: using BVCI 24196 22:47:50.366583 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.377347 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.387973 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.399445 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.411196 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.423453 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.434218 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.445452 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 22:47:50.456909 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 22:47:50.579181 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 22:47:50.857905 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:47:50.983126 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:47:51.294646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25772): Launched 22:47:51.554283 run iperf3-srv_10.42.42.10(pid=25773): Launched 22:47:51.737577 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:47:51.862581 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:47:52.173894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25774): Launched 22:47:52.432191 run iperf3-srv_10.42.42.10(pid=25775): Launched 22:47:52.615276 tst cs_paging_gprs_active.py:38: start network... 22:47:52.739751 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:47:53.218453 run create_hlr_db(pid=25776): Launched 22:47:53.390616 bus /sierra_2: Setting Powered False 22:47:54.412797 run create_hlr_db(pid=25776): Terminated: ok {rc=0} 22:47:54.811727 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25778): Launched 22:47:55.110664 run osmo-hlr_10.42.42.2(pid=25779): Launched 22:47:55.223958 run osmo-stp_10.42.42.5: Starting osmo-stp 22:47:55.743818 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25781): Launched 22:47:56.043519 run osmo-stp_10.42.42.5(pid=25782): Launched 22:47:56.153738 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:47:56.677999 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25784): Launched 22:47:56.784818 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:47:57.047430 run patchelf(pid=25785): Launched 22:47:57.225419 run osmo-stp_10.42.42.5(pid=25782): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25782)] 22:47:57.355382 run osmo-stp_10.42.42.5(pid=25782): stdout: | (launched: 2022-12-09_22:47:55.896493) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:47:57.485585 run osmo-stp_10.42.42.5(pid=25782): stderr: | �[0;m�[38;5;43m20221209224756065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209224756065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209224756065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209224756065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209224756066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209224756066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209224756066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:47:57.611434 run osmo-stp_10.42.42.5(pid=25782): stdout: | (launched: 2022-12-09_22:47:55.896493) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:47:57.735748 run osmo-stp_10.42.42.5(pid=25782): stderr: | �[0;m�[38;5;43m20221209224756065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209224756065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209224756065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209224756065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209224756066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209224756066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209224756066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:47:57.882149 run patchelf(pid=25785): Terminating (SIGINT) 22:47:58.054638 run patchelf(pid=25785): Terminated: ok {rc=0} 22:47:58.086107 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25782): Process ended prematurely: osmo-stp_10.42.42.5(pid=25782) [trial-2365↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25782)] [trial-2365↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 22:47:58.095406 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 22:47:58.155462 run osmo-hlr_10.42.42.2(pid=25779): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25779)] 22:47:58.204188 run osmo-hlr_10.42.42.2(pid=25779): stdout: | (launched: 2022-12-09_22:47:54.963650) 22:47:58.253370 run osmo-hlr_10.42.42.2(pid=25779): stderr: | �[0;m�[1;31m20221209224755137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209224755137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209224755137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209224755137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209224755137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209224755137 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209224755150 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209224755159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209224755159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209224755159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:47:58.295080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25772): Terminating (SIGTERM) 22:47:58.334521 run iperf3-srv_10.42.42.10(pid=25773): Terminating (SIGTERM) 22:47:58.373966 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25774): Terminating (SIGTERM) 22:47:58.413487 run iperf3-srv_10.42.42.10(pid=25775): Terminating (SIGTERM) 22:47:58.452874 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25778): Terminating (SIGTERM) 22:47:58.492486 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25781): Terminating (SIGTERM) 22:47:58.532249 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25784): Terminating (SIGTERM) 22:47:58.541368 --- ParallelTerminationStrategy: PID 25772 died... 22:47:58.594417 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25772): Terminated: ok {rc=0} 22:47:58.604138 --- ParallelTerminationStrategy: PID 25773 died... 22:47:58.656894 run iperf3-srv_10.42.42.10(pid=25773): Terminated {rc=256} 22:47:58.666304 --- ParallelTerminationStrategy: PID 25774 died... 22:47:58.718976 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25774): Terminated: ok {rc=0} 22:47:58.728681 --- ParallelTerminationStrategy: PID 25775 died... 22:47:58.781673 run iperf3-srv_10.42.42.10(pid=25775): Terminated {rc=256} 22:47:58.791168 --- ParallelTerminationStrategy: PID 25778 died... 22:47:58.844081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25778): Terminated: ok {rc=0} 22:47:58.853870 --- ParallelTerminationStrategy: PID 25781 died... 22:47:58.906714 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25781): Terminated: ok {rc=0} 22:47:58.916243 --- ParallelTerminationStrategy: PID 25784 died... 22:47:58.968925 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25784): Terminated: ok {rc=0} 22:47:59.056766 bus /gobi_0: Setting Powered False 22:48:00.158535 bus /gobi_0: Setting Powered False 22:48:01.265331 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25782): Process ended prematurely: osmo-stp_10.42.42.5(pid=25782) [trial-2365↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25782)]