Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=27260): Process ended prematurely: osmo-stp_10.42.42.5(pid=27260) [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27260)]
Standard Output
---------------------------------------------- trial-2365 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 22:57:22.969120 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:22.981168 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:57:23.121543 tst iperf3m4.py: using LAC 24245 22:57:23.239580 tst iperf3m4.py: using RAC 20 22:57:23.356589 tst iperf3m4.py: using CellId 24245 22:57:23.475325 tst iperf3m4.py: using BVCI 24246 22:57:23.498302 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.509518 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.520754 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.532227 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.543597 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.555000 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.566667 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.578340 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.589998 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:23.707016 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:23.829069 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:23.951369 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:24.230455 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 22:57:24.356279 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:24.667158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27246): Launched 22:57:24.925347 run iperf3-srv_10.42.42.10(pid=27247): Launched 22:57:25.109978 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 22:57:25.235814 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:25.548491 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27248): Launched 22:57:25.805566 run iperf3-srv_10.42.42.10(pid=27249): Launched 22:57:25.987868 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 22:57:26.112180 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:26.423047 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27250): Launched 22:57:26.681893 run iperf3-srv_10.42.42.10(pid=27251): Launched 22:57:26.866374 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 22:57:26.992646 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:27.305240 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27252): Launched 22:57:27.564425 run iperf3-srv_10.42.42.10(pid=27253): Launched 22:57:27.746816 tst iperf3m4.py:8: start network... 22:57:27.871542 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:57:28.343256 run create_hlr_db(pid=27254): Launched 22:57:28.517867 bus /gobi_6: Setting Powered False 22:57:29.537686 run create_hlr_db(pid=27254): Terminated: ok {rc=0} 22:57:29.936015 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27256): Launched 22:57:30.234622 run osmo-hlr_10.42.42.2(pid=27257): Launched 22:57:30.352004 run osmo-stp_10.42.42.5: Starting osmo-stp 22:57:30.899110 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27259): Launched 22:57:31.330986 run osmo-stp_10.42.42.5(pid=27260): Launched 22:57:31.553211 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:57:32.162048 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27262): Launched 22:57:32.281565 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:57:32.562822 run patchelf(pid=27263): Launched 22:57:32.750613 run osmo-stp_10.42.42.5(pid=27260): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27260)] 22:57:32.887720 run osmo-stp_10.42.42.5(pid=27260): stdout: | (launched: 2022-12-09_22:57:31.072256) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:33.025403 run osmo-stp_10.42.42.5(pid=27260): stderr: | �[0;m�[38;5;43m20221209225731413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209225731413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209225731413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209225731414 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209225731414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209225731414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209225731414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:33.158561 run osmo-stp_10.42.42.5(pid=27260): stdout: | (launched: 2022-12-09_22:57:31.072256) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:33.289493 run osmo-stp_10.42.42.5(pid=27260): stderr: | �[0;m�[38;5;43m20221209225731413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209225731413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209225731413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209225731414 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209225731414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209225731414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209225731414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:33.443312 run patchelf(pid=27263): Terminating (SIGINT) 22:57:33.624733 run patchelf(pid=27263): Terminated: ok {rc=0} 22:57:33.657969 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27260): Process ended prematurely: osmo-stp_10.42.42.5(pid=27260) [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27260)] [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 22:57:33.667774 tst iperf3m4.py:8: Test FAILED (10.7 sec) 22:57:33.730331 run osmo-hlr_10.42.42.2(pid=27257): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27257)] 22:57:33.781458 run osmo-hlr_10.42.42.2(pid=27257): stdout: | (launched: 2022-12-09_22:57:30.087879) 22:57:33.833089 run osmo-hlr_10.42.42.2(pid=27257): stderr: | �[0;m�[1;31m20221209225730264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209225730264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209225730264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209225730264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209225730264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209225730264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209225730275 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209225730284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209225730284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209225730284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:57:33.877023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27246): Terminating (SIGTERM) 22:57:33.918670 run iperf3-srv_10.42.42.10(pid=27247): Terminating (SIGTERM) 22:57:33.960453 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27248): Terminating (SIGTERM) 22:57:34.002029 run iperf3-srv_10.42.42.10(pid=27249): Terminating (SIGTERM) 22:57:34.043976 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27250): Terminating (SIGTERM) 22:57:34.085570 run iperf3-srv_10.42.42.10(pid=27251): Terminating (SIGTERM) 22:57:34.127279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27252): Terminating (SIGTERM) 22:57:34.168711 run iperf3-srv_10.42.42.10(pid=27253): Terminating (SIGTERM) 22:57:34.211973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27256): Terminating (SIGTERM) 22:57:34.253530 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27259): Terminating (SIGTERM) 22:57:34.295496 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27262): Terminating (SIGTERM) 22:57:34.305159 --- ParallelTerminationStrategy: PID 27246 died... 22:57:34.360695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27246): Terminated: ok {rc=0} 22:57:34.371080 --- ParallelTerminationStrategy: PID 27247 died... 22:57:34.426039 run iperf3-srv_10.42.42.10(pid=27247): Terminated {rc=256} 22:57:34.435990 --- ParallelTerminationStrategy: PID 27248 died... 22:57:34.491370 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27248): Terminated: ok {rc=0} 22:57:34.501522 --- ParallelTerminationStrategy: PID 27249 died... 22:57:34.556594 run iperf3-srv_10.42.42.10(pid=27249): Terminated {rc=256} 22:57:34.566580 --- ParallelTerminationStrategy: PID 27250 died... 22:57:34.621890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27250): Terminated: ok {rc=0} 22:57:34.632022 --- ParallelTerminationStrategy: PID 27251 died... 22:57:34.687003 run iperf3-srv_10.42.42.10(pid=27251): Terminated {rc=256} 22:57:34.697051 --- ParallelTerminationStrategy: PID 27252 died... 22:57:34.752068 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27252): Terminated: ok {rc=0} 22:57:34.761968 --- ParallelTerminationStrategy: PID 27253 died... 22:57:34.817255 run iperf3-srv_10.42.42.10(pid=27253): Terminated {rc=256} 22:57:34.827246 --- ParallelTerminationStrategy: PID 27256 died... 22:57:34.882086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27256): Terminated: ok {rc=0} 22:57:34.892114 --- ParallelTerminationStrategy: PID 27259 died... 22:57:34.947101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27259): Terminated: ok {rc=0} 22:57:34.957211 --- ParallelTerminationStrategy: PID 27262 died... 22:57:35.012774 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27262): Terminated: ok {rc=0} 22:57:35.100141 bus /gobi_4: Setting Powered False 22:57:36.206525 bus /gobi_4: Setting Powered False 22:57:37.317310 bus /gobi_1: Setting Powered False 22:57:38.421021 bus /gobi_1: Setting Powered False 22:57:39.532271 bus /gobi_0: Setting Powered False 22:57:40.634468 bus /gobi_0: Setting Powered False 22:57:41.745694 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27260): Process ended prematurely: osmo-stp_10.42.42.5(pid=27260) [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27260)]