Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21101): Process ended prematurely: osmo-stp_10.42.42.5(pid=21101) [trial-2365↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21101)]
Standard Output
---------------------------------------------- trial-2365 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:00:10.213762 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.224445 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:00:10.365859 tst cs_paging_gprs_active.py: using LAC 23941 22:00:10.483436 tst cs_paging_gprs_active.py: using RAC 226 22:00:10.602758 tst cs_paging_gprs_active.py: using CellId 23941 22:00:10.722658 tst cs_paging_gprs_active.py: using BVCI 23942 22:00:10.745928 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.756605 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.767116 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.777932 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.788471 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.799250 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.810088 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.820680 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:10.831555 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:10.947510 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:11.225763 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:00:11.351895 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:11.665405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21091): Launched 22:00:11.927515 run iperf3-srv_10.42.42.10(pid=21092): Launched 22:00:12.111789 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:00:12.237881 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:12.551129 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21093): Launched 22:00:12.811096 run iperf3-srv_10.42.42.10(pid=21094): Launched 22:00:12.995657 tst cs_paging_gprs_active.py:38: start network... 22:00:13.121517 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:00:13.595772 run create_hlr_db(pid=21095): Launched 22:00:13.769858 bus /gobi_6: Setting Powered False 22:00:14.791265 run create_hlr_db(pid=21095): Terminated: ok {rc=0} 22:00:15.194339 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21097): Launched 22:00:15.496096 run osmo-hlr_10.42.42.2(pid=21098): Launched 22:00:15.614225 run osmo-stp_10.42.42.5: Starting osmo-stp 22:00:16.208778 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21100): Launched 22:00:16.722403 run osmo-stp_10.42.42.5(pid=21101): Launched 22:00:16.916716 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:00:17.515656 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21103): Launched 22:00:17.630452 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:00:17.912319 run patchelf(pid=21104): Launched 22:00:18.101266 run osmo-stp_10.42.42.5(pid=21101): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21101)] 22:00:18.239442 run osmo-stp_10.42.42.5(pid=21101): stdout: | (launched: 2022-12-09_22:00:16.364587) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:18.377649 run osmo-stp_10.42.42.5(pid=21101): stderr: | �[0;m�[38;5;43m20221209220016647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220016647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220016648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220016650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220016650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220016651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220016651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:18.511123 run osmo-stp_10.42.42.5(pid=21101): stdout: | (launched: 2022-12-09_22:00:16.364587) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:18.643212 run osmo-stp_10.42.42.5(pid=21101): stderr: | �[0;m�[38;5;43m20221209220016647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220016647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220016648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220016650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220016650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220016651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220016651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:18.798508 run patchelf(pid=21104): Terminating (SIGINT) 22:00:18.980668 run patchelf(pid=21104): Terminated: ok {rc=0} 22:00:19.014148 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21101): Process ended prematurely: osmo-stp_10.42.42.5(pid=21101) [trial-2365↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21101)] [trial-2365↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:00:19.023858 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 22:00:19.086155 run osmo-hlr_10.42.42.2(pid=21098): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21098)] 22:00:19.137209 run osmo-hlr_10.42.42.2(pid=21098): stdout: | (launched: 2022-12-09_22:00:15.347335) 22:00:19.188918 run osmo-hlr_10.42.42.2(pid=21098): stderr: | �[0;m�[1;31m20221209220015526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209220015526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209220015526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209220015526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209220015526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209220015526 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209220015538 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209220015547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209220015547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209220015547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:00:19.233141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21091): Terminating (SIGTERM) 22:00:19.274783 run iperf3-srv_10.42.42.10(pid=21092): Terminating (SIGTERM) 22:00:19.316403 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21093): Terminating (SIGTERM) 22:00:19.357863 run iperf3-srv_10.42.42.10(pid=21094): Terminating (SIGTERM) 22:00:19.399714 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21097): Terminating (SIGTERM) 22:00:19.441781 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21100): Terminating (SIGTERM) 22:00:19.483287 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21103): Terminating (SIGTERM) 22:00:19.492773 --- ParallelTerminationStrategy: PID 21091 died... 22:00:19.548378 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21091): Terminated: ok {rc=0} 22:00:19.558666 --- ParallelTerminationStrategy: PID 21092 died... 22:00:19.613693 run iperf3-srv_10.42.42.10(pid=21092): Terminated {rc=256} 22:00:19.623544 --- ParallelTerminationStrategy: PID 21093 died... 22:00:19.678843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21093): Terminated: ok {rc=0} 22:00:19.688748 --- ParallelTerminationStrategy: PID 21094 died... 22:00:19.743974 run iperf3-srv_10.42.42.10(pid=21094): Terminated {rc=256} 22:00:19.753886 --- ParallelTerminationStrategy: PID 21097 died... 22:00:19.809663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21097): Terminated: ok {rc=0} 22:00:19.819627 --- ParallelTerminationStrategy: PID 21100 died... 22:00:19.874741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21100): Terminated: ok {rc=0} 22:00:19.884628 --- ParallelTerminationStrategy: PID 21103 died... 22:00:19.939976 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21103): Terminated: ok {rc=0} 22:00:20.027131 bus /gobi_0: Setting Powered False 22:00:21.133673 bus /gobi_0: Setting Powered False 22:00:22.245214 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21101): Process ended prematurely: osmo-stp_10.42.42.5(pid=21101) [trial-2365↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21101)]